The MECHREV Jiaolong17 Series GM7RG7M (TongFang GM7RG7M, Ryzen 7 6800H) describes the PS/2 keyboard interrupt in its DSDT as edge-triggered, active-low and shared: IRQ (Edge, ActiveLow, Shared) {1} The keyboard controller actually asserts IRQ 1 active-high. On AMD Zen systems acpi_dev_irq_override() skips the ACPI IRQ override for GSI 1, so the IO-APIC redirection entry is programmed with the DSDT's active-low polarity and the interrupt is never delivered: the embedded controller still scans the matrix and places scancodes in port 0x60, but atkbd_receive_byte() is never called and the internal keyboard is dead under Linux, while it works in the firmware setup, in GRUB and in Windows. Add the board to irq1_edge_low_force_override[] so that the standard edge/high override is applied, matching the already-listed sibling GM7XG0M (Jiaolong17KS). Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms") Cc: stable@vger.kernel.org Tested-by: Andrei Galiant Signed-off-by: Andrei Galiant --- drivers/acpi/resource.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index 56df459..0a944ba 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -553,6 +553,12 @@ static const struct dmi_system_id irq1_edge_low_force_override[] = { DMI_MATCH(DMI_BOARD_NAME, "GM7XG0M"), }, }, + { + /* MECHREVO Jiaolong17 Series GM7RG7M */ + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GM7RG7M"), + }, + }, { /* XMG APEX 17 (M23) */ .matches = { -- 2.56.0