From: Yi Cong <yicong@kylinos.cn>

A similar reason was raised in ec51fbd1b8a2
(r8152: add USB device driver for config selection):
Linux prioritizes probing non-vendor-specific configurations.

Referring to the implementation of this patch, cfgselect is also
used for ax88179 to override the default configuration selection.

Signed-off-by: Yi Cong <yicong@kylinos.cn>
---
 drivers/net/usb/ax88179_178a.c | 72 ++++++++++++++++++++++++++++++++--
 1 file changed, 69 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 29cbe9ddd610..965d2a66695d 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -14,6 +14,7 @@
 #include <uapi/linux/mdio.h>
 #include <linux/mdio.h>
 
+#define MODULENAME "ax88179_178a"
 #define AX88179_PHY_ID				0x03
 #define AX_EEPROM_LEN				0x100
 #define AX88179_EEPROM_MAGIC			0x17900b95
@@ -1713,6 +1714,16 @@ static int ax88179_stop(struct usbnet *dev)
 	return 0;
 }
 
+static int ax88179_probe(struct usb_interface *intf, const struct usb_device_id *i)
+{
+	if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC) {
+		printk("[YCDBG][%s:%d] bInterfaceClass:%d\n", __func__, __LINE__, intf->cur_altsetting->desc.bInterfaceClass);
+		return -ENODEV;
+	}
+
+	return usbnet_probe(intf, i);
+}
+
 static const struct driver_info ax88179_info = {
 	.description = "ASIX AX88179 USB 3.0 Gigabit Ethernet",
 	.bind = ax88179_bind,
@@ -1941,9 +1952,9 @@ static const struct usb_device_id products[] = {
 MODULE_DEVICE_TABLE(usb, products);
 
 static struct usb_driver ax88179_178a_driver = {
-	.name =		"ax88179_178a",
+	.name =		MODULENAME,
 	.id_table =	products,
-	.probe =	usbnet_probe,
+	.probe =	ax88179_probe,
 	.suspend =	ax88179_suspend,
 	.resume =	ax88179_resume,
 	.reset_resume =	ax88179_resume,
@@ -1952,7 +1963,62 @@ static struct usb_driver ax88179_178a_driver = {
 	.disable_hub_initiated_lpm = 1,
 };
 
-module_usb_driver(ax88179_178a_driver);
+static int ax88179_cfgselector_probe(struct usb_device *udev)
+{
+	struct usb_host_config *c;
+	int i, num_configs;
+
+	/* The vendor mode is not always config #1, so to find it out. */
+	c = udev->config;
+	num_configs = udev->descriptor.bNumConfigurations;
+	for (i = 0; i < num_configs; (i++, c++)) {
+		struct usb_interface_descriptor	*desc = NULL;
+
+		if (!c->desc.bNumInterfaces)
+			continue;
+		desc = &c->intf_cache[0]->altsetting->desc;
+		if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC)
+			break;
+	}
+
+	if (i == num_configs)
+		return -ENODEV;
+
+	if (usb_set_configuration(udev, c->desc.bConfigurationValue)) {
+		dev_err(&udev->dev, "Failed to set configuration %d\n",
+			c->desc.bConfigurationValue);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static struct usb_device_driver ax88179_cfgselector_driver = {
+	.name =		MODULENAME "-cfgselector",
+	.probe =	ax88179_cfgselector_probe,
+	.id_table =	products,
+	.generic_subclass = 1,
+	.supports_autosuspend = 1,
+};
+
+static int __init ax88179_driver_init(void)
+{
+	int ret;
+
+	ret = usb_register_device_driver(&ax88179_cfgselector_driver, THIS_MODULE);
+	if (ret)
+		return ret;
+	return usb_register(&ax88179_178a_driver);
+}
+
+static void __exit ax88179_driver_exit(void)
+{
+	usb_deregister(&ax88179_178a_driver);
+	usb_deregister_device_driver(&ax88179_cfgselector_driver);
+}
+
+module_init(ax88179_driver_init);
+module_exit(ax88179_driver_exit);
 
 MODULE_DESCRIPTION("ASIX AX88179/178A based USB 3.0/2.0 Gigabit Ethernet Devices");
 MODULE_LICENSE("GPL");
-- 
2.25.1