6.12-stable review patch. If anyone has any objections, please let me know. ------------------ From: Carlos Song [ Upstream commit cbd043b00ee3f542c115c8809c4d9a67465c07d5 ] When probe fails at devm_clk_rate_exclusive_get() or clk_get_rate(), which occur before runtime PM is initialized, the clocks enabled by clk_bulk_prepare_enable() are never disabled. When probe fails after runtime PM is initialized, the previous error path called pm_runtime_put_sync(), which triggers the runtime suspend callback. However, due to different clock management strategies on different SoCs[1] (to avoid deadlocks between the global prepare_lock and runtime PM), the callback may only disable clocks without unpreparing them, causing an incomplete unwind. Introduce a new error label 'clk_disable' to explicitly invoke clk_bulk_disable_unprepare(). Replace pm_runtime_put_sync() with the sequence of pm_runtime_disable(), pm_runtime_set_suspended() and pm_runtime_put_noidle() to bypass the runtime suspend callback during error recovery. During the LPI2C driver probe phase, clock APIs are used exclusively to manage clocks. Once probing succeeds, clock management is handed over to the runtime PM core. [1] https://lore.kernel.org/all/20251125084718.2156168-1-carlos.song@nxp.com/ Signed-off-by: Carlos Song Reviewed-by: Frank Li Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260716071957.2670263-2-carlos.song@oss.nxp.com Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-imx-lpi2c.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c index 86b41cd48ad4c..8103c14876d57 100644 --- a/drivers/i2c/busses/i2c-imx-lpi2c.c +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c @@ -615,14 +615,18 @@ static int lpi2c_imx_probe(struct platform_device *pdev) * each transfer */ ret = devm_clk_rate_exclusive_get(&pdev->dev, lpi2c_imx->clks[0].clk); - if (ret) - return dev_err_probe(&pdev->dev, ret, - "can't lock I2C peripheral clock rate\n"); + if (ret) { + ret = dev_err_probe(&pdev->dev, ret, + "can't lock I2C peripheral clock rate\n"); + goto clk_disable; + } lpi2c_imx->rate_per = clk_get_rate(lpi2c_imx->clks[0].clk); - if (!lpi2c_imx->rate_per) - return dev_err_probe(&pdev->dev, -EINVAL, - "can't get I2C peripheral clock rate\n"); + if (!lpi2c_imx->rate_per) { + ret = dev_err_probe(&pdev->dev, -EINVAL, + "can't get I2C peripheral clock rate\n"); + goto clk_disable; + } pm_runtime_set_autosuspend_delay(&pdev->dev, I2C_PM_TIMEOUT); pm_runtime_use_autosuspend(&pdev->dev); @@ -653,8 +657,11 @@ static int lpi2c_imx_probe(struct platform_device *pdev) rpm_disable: pm_runtime_dont_use_autosuspend(&pdev->dev); - pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); +clk_disable: + clk_bulk_disable_unprepare(lpi2c_imx->num_clks, lpi2c_imx->clks); return ret; } -- 2.53.0