Previous changes have replaced the machine-level priv->phycr2 with a high-level priv->disable_clk_out. This created a discrepancy with priv->phycr1 which is resolved here, for uniformity. One advantage of this new implementation is that we don't read priv->phycr1 in rtl821x_probe() if we're never going to modify it. We never test the positive return code from phy_modify_mmd_changed(), so we could just as well use phy_modify_mmd(). I took the ALDPS feature description from commit d90db36a9e74 ("net: phy: realtek: add dt property to enable ALDPS mode") and transformed it into a function comment - the feature is sufficiently non-obvious to deserve that. Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn --- v2->v3: just context changes v1->v2: patch is new drivers/net/phy/realtek/realtek_main.c | 44 ++++++++++++++++---------- 1 file changed, 28 insertions(+), 16 deletions(-) diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c index da30cdb522a3..2ecdcea53a11 100644 --- a/drivers/net/phy/realtek/realtek_main.c +++ b/drivers/net/phy/realtek/realtek_main.c @@ -201,7 +201,7 @@ MODULE_AUTHOR("Johnson Leung"); MODULE_LICENSE("GPL"); struct rtl821x_priv { - u16 phycr1; + bool enable_aldps; bool disable_clk_out; struct clk *clk; /* rtl8211f */ @@ -252,7 +252,6 @@ static int rtl821x_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; struct rtl821x_priv *priv; - int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -263,14 +262,8 @@ static int rtl821x_probe(struct phy_device *phydev) return dev_err_probe(dev, PTR_ERR(priv->clk), "failed to get phy clock\n"); - ret = phy_read_paged(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR1); - if (ret < 0) - return ret; - - priv->phycr1 = ret & (RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF); - if (of_property_read_bool(dev->of_node, "realtek,aldps-enable")) - priv->phycr1 |= RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF; - + priv->enable_aldps = of_property_read_bool(dev->of_node, + "realtek,aldps-enable"); priv->disable_clk_out = of_property_read_bool(dev->of_node, "realtek,clkout-disable"); @@ -674,17 +667,36 @@ static int rtl8211f_config_clk_out(struct phy_device *phydev) return genphy_soft_reset(phydev); } -static int rtl8211f_config_init(struct phy_device *phydev) +/* Advance Link Down Power Saving (ALDPS) mode changes crystal/clock behaviour, + * which causes the RXC clock signal to stop for tens to hundreds of + * milliseconds. + * + * Some MACs need the RXC clock to support their internal RX logic, so ALDPS is + * only enabled based on an opt-in device tree property. + */ +static int rtl8211f_config_aldps(struct phy_device *phydev) { struct rtl821x_priv *priv = phydev->priv; + u16 mask = RTL8211F_ALDPS_PLL_OFF | + RTL8211F_ALDPS_ENABLE | + RTL8211F_ALDPS_XTAL_OFF; + + /* The value is preserved if the device tree property is absent */ + if (!priv->enable_aldps) + return 0; + + return phy_modify_paged(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR1, + mask, mask); +} + +static int rtl8211f_config_init(struct phy_device *phydev) +{ struct device *dev = &phydev->mdio.dev; int ret; - ret = phy_modify_paged_changed(phydev, RTL8211F_PHYCR_PAGE, RTL8211F_PHYCR1, - RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF, - priv->phycr1); - if (ret < 0) { - dev_err(dev, "aldps mode configuration failed: %pe\n", + ret = rtl8211f_config_aldps(phydev); + if (ret) { + dev_err(dev, "aldps mode configuration failed: %pe\n", ERR_PTR(ret)); return ret; } -- 2.34.1