This change sets the rx-internal-delay-ps and tx-internal-delay-ps
properties to control the RGMII signal delay.
The phy-mode for MAC0–MAC3 is updated to "rgmii-id" to enable TX/RX
internal delay on the PHY and disable the corresponding delay
on the MAC.

Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
 arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts | 28 +++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
index de83c0eb1d6e..a65568e637bd 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
@@ -121,44 +121,64 @@ ethphy3: ethernet-phy@0 {
 };
 
 &mac0 {
+	compatible = "aspeed,ast2600-mac01", "aspeed,ast2600-mac", "faraday,ftgmac100";
 	status = "okay";
 
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii1_default>;
+
+	rx-internal-delay-ps = <0>;
+	tx-internal-delay-ps = <0>;
+	scu = <&syscon>;
 };
 
 
 &mac1 {
+	compatible = "aspeed,ast2600-mac01", "aspeed,ast2600-mac", "faraday,ftgmac100";
 	status = "okay";
 
-	phy-mode = "rgmii-rxid";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii2_default>;
+
+	rx-internal-delay-ps = <0>;
+	tx-internal-delay-ps = <0>;
+	scu = <&syscon>;
 };
 
 &mac2 {
+	compatible = "aspeed,ast2600-mac23", "aspeed,ast2600-mac", "faraday,ftgmac100";
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy2>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii3_default>;
+
+	rx-internal-delay-ps = <0>;
+	tx-internal-delay-ps = <0>;
+	scu = <&syscon>;
 };
 
 &mac3 {
+	compatible = "aspeed,ast2600-mac23", "aspeed,ast2600-mac", "faraday,ftgmac100";
 	status = "okay";
 
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy3>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rgmii4_default>;
+
+	rx-internal-delay-ps = <0>;
+	tx-internal-delay-ps = <0>;
+	scu = <&syscon>;
 };
 
 &emmc_controller {

-- 
2.34.1