Add the 2.4 GHz RF power offset table for N-PHY rev 8 paired with radio 2057 rev 8 and wire it to the existing dispatcher. b43_ntab_get_rf_pwr_offset_table() currently dispatches on phy->rev == 17 (radio_rev 14) and phy->rev == 16 (radio_rev 9) for 2.4 GHz. phy->rev == 8 falls through and the function logs: b43-phyX ERROR: No 2GHz RF power table available for this device Add a phy->rev == 8 / radio_rev == 8 case returning the new table. The values are sourced from the proprietary Broadcom wl driver's nphy_papd_padgain_dlt_2g_2057rev5 array. Reusing the rev 5 values is structurally appropriate: the IPA TX gain table added by the preceding patch in this series shares the low 24 bits of every entry with rev 5 - same gain step amplitudes, only the PAD-gain selector byte differs. b43's pad_gain extraction in b43_nphy_tx_pwr_ctl_init() reads bits 19..23 of the gain entry, which sit in the shared low-24-bit range; the same gain index therefore maps to the same physical PAD gain code on both revisions and warrants the same per-index dB offset. Note that b43_nphy_tx_gain_table_upload() currently has a "TODO: Enable this once we have gains configured" early-return for phy->rev >= 7. With that early-return in place, this table is fetched (silencing the b43err that would otherwise abort PHY init) but its values are not yet written to MMIO. Resolving the TODO is a separate investigation outside the scope of this series; the values supplied here are documented now so that, once the upload path is enabled, the correct rev 8 offsets are already in tree. Signed-off-by: Alessio Ferri --- .../net/wireless/broadcom/b43/tables_nphy.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/net/wireless/broadcom/b43/tables_nphy.c b/drivers/net/wireless/broadcom/b43/tables_nphy.c index 84e8d718d..ecd660b9c 100644 --- a/drivers/net/wireless/broadcom/b43/tables_nphy.c +++ b/drivers/net/wireless/broadcom/b43/tables_nphy.c @@ -2923,6 +2923,21 @@ static const s16 b43_ntab_rf_pwr_offset_2057_rev9_5g[] = { 0, }; +/* Sourced from the rev 5 sibling: the rev 8 IPA TX gain table + * shares the low 24 bits of every entry with rev 5 (only the + * PAD-gain selector byte differs), so the same gain index maps to + * the same physical PAD gain code on both revisions. + */ +static const s16 b43_ntab_rf_pwr_offset_2057_rev8_2g[] = { + -109, -109, -82, -68, -58, + -50, -44, -39, -35, -31, + -28, -26, -23, -21, -19, + -17, -16, -14, -13, -11, + -10, -9, -8, -7, -5, + -5, -4, -3, -2, -1, + -1, 0, +}; + /* Extracted from MMIO dump of 6.30.223.248 * Entries: 0, 26, 28, 29, 30, 31 were guessed */ @@ -3782,6 +3797,10 @@ const s16 *b43_ntab_get_rf_pwr_offset_table(struct b43_wldev *dev) if (phy->radio_rev == 9) return b43_ntab_rf_pwr_offset_2057_rev9_2g; break; + case 8: + if (phy->radio_rev == 8) + return b43_ntab_rf_pwr_offset_2057_rev8_2g; + break; } b43err(dev->wl, -- 2.43.0