Both the nxp,sja1105 and the nxp,sja1110 series feature an active-low reset pin, rendering reset-gpios a valid property for all of the nxp,sja1105 family. Acked-by: Vladimir Oltean Reviewed-by: Rob Herring (Arm) Reviewed-by: Frank Li Signed-off-by: Jonas Rebmann --- Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml index 9432565f4f5d..e9dd914b0734 100644 --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -32,6 +32,15 @@ properties: reg: maxItems: 1 + reset-gpios: + description: + A GPIO connected to the active-low RST_N pin of the SJA1105. Note that + reset of this chip is performed via SPI and the RST_N pin must be wired + to satisfy the power-up sequence documented in "SJA1105PQRS Application + Hints" (AH1704) sec. 2.4.4. Connecting the SJA1105 RST_N pin to a GPIO is + therefore discouraged. + maxItems: 1 + spi-cpha: true spi-cpol: true -- 2.51.0.297.gca2559c1d6