ARCnet docs states that inquiries on the subsystem should be emailed to Avery Pennarun , for whom has been in CREDITS since the beginning of kernel git history and the subsystem is now maintained by Michael Grzeschik since c38f6ac74c9980 ("MAINTAINERS: add arcnet and take maintainership"). In addition, there used to be a dedicated ARCnet mailing list but its archive at epistolary.org has been shut down. ARCnet discussion nowadays take place in netdev list. Update contact information. Signed-off-by: Bagas Sanjaya --- Documentation/networking/arcnet-hardware.rst | 13 +++--- Documentation/networking/arcnet.rst | 48 +++++--------------- 2 files changed, 17 insertions(+), 44 deletions(-) diff --git a/Documentation/networking/arcnet-hardware.rst b/Documentation/networking/arcnet-hardware.rst index 3bf7f99cd7bbf0..1e4484d880fe67 100644 --- a/Documentation/networking/arcnet-hardware.rst +++ b/Documentation/networking/arcnet-hardware.rst @@ -4,6 +4,8 @@ ARCnet Hardware =============== +:Author: Avery Pennarun + .. note:: 1) This file is a supplement to arcnet.txt. Please read that for general @@ -13,9 +15,9 @@ ARCnet Hardware Because so many people (myself included) seem to have obtained ARCnet cards without manuals, this file contains a quick introduction to ARCnet hardware, -some cabling tips, and a listing of all jumper settings I can find. Please -e-mail apenwarr@worldvisions.ca with any settings for your particular card, -or any other information you have! +some cabling tips, and a listing of all jumper settings I can find. If you +have any settings for your particular card, and/or any other information you +have, do not hesistate to :ref:`email to netdev `. Introduction to ARCnet @@ -3226,9 +3228,6 @@ Settings for IRQ Selection (Lower Jumper Line) Other Cards =========== -I have no information on other models of ARCnet cards at the moment. Please -send any and all info to: - - apenwarr@worldvisions.ca +I have no information on other models of ARCnet cards at the moment. Thanks. diff --git a/Documentation/networking/arcnet.rst b/Documentation/networking/arcnet.rst index 82fce606c0f0bc..cd43a18ad1494b 100644 --- a/Documentation/networking/arcnet.rst +++ b/Documentation/networking/arcnet.rst @@ -4,6 +4,8 @@ ARCnet ====== +:Author: Avery Pennarun + .. note:: See also arcnet-hardware.txt in this directory for jumper-setting @@ -30,18 +32,7 @@ Come on, be a sport! Send me a success report! (hey, that was even better than my original poem... this is getting bad!) - -.. warning:: - - If you don't e-mail me about your success/failure soon, I may be forced to - start SINGING. And we don't want that, do we? - - (You know, it might be argued that I'm pushing this point a little too much. - If you think so, why not flame me in a quick little e-mail? Please also - include the type of card(s) you're using, software, size of network, and - whether it's working or not.) - - My e-mail address is: apenwarr@worldvisions.ca +---- These are the ARCnet drivers for Linux. @@ -59,23 +50,14 @@ ARCnet 2.10 ALPHA, Tomasz's all-new-and-improved RFC1051 support has been included and seems to be working fine! +.. _arcnet-netdev: + Where do I discuss these drivers? --------------------------------- -Tomasz has been so kind as to set up a new and improved mailing list. -Subscribe by sending a message with the BODY "subscribe linux-arcnet YOUR -REAL NAME" to listserv@tichy.ch.uj.edu.pl. Then, to submit messages to the -list, mail to linux-arcnet@tichy.ch.uj.edu.pl. - -There are archives of the mailing list at: - - http://epistolary.org/mailman/listinfo.cgi/arcnet - -The people on linux-net@vger.kernel.org (now defunct, replaced by -netdev@vger.kernel.org) have also been known to be very helpful, especially -when we're talking about ALPHA Linux kernels that may or may not work right -in the first place. - +ARCnet discussions take place on netdev. Simply send your email to +netdev@vger.kernel.org and make sure to Cc: maintainer listed in +"ARCNET NETWORK LAYER" heading of Documentation/process/maintainers.rst. Other Drivers and Info ---------------------- @@ -523,17 +505,9 @@ can set up your network then: It works: what now? ------------------- -Send mail describing your setup, preferably including driver version, kernel -version, ARCnet card model, CPU type, number of systems on your network, and -list of software in use to me at the following address: - - apenwarr@worldvisions.ca - -I do send (sometimes automated) replies to all messages I receive. My email -can be weird (and also usually gets forwarded all over the place along the -way to me), so if you don't get a reply within a reasonable time, please -resend. - +Send mail following :ref:`arcnet-netdev`. Describe your setup, preferably +including driver version, kernel version, ARCnet card model, CPU type, number +of systems on your network, and list of software in use. It doesn't work: what now? -------------------------- base-commit: 2f186dd5585c3afb415df80e52f71af16c9d3655 -- An old man doll... just what I always wanted! - Clara