Let the hardware flood the unknown unicast / multicast if all other ports in the bridge have BR_FLOOD / BR_MCAST_FLOOD enabled. Signed-off-by: David Yang --- drivers/net/dsa/motorcomm/chip.c | 177 ++++++++++++++++++++++++------- drivers/net/dsa/motorcomm/chip.h | 4 + 2 files changed, 145 insertions(+), 36 deletions(-) diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c index fb993cc9607c..247446c6466e 100644 --- a/drivers/net/dsa/motorcomm/chip.c +++ b/drivers/net/dsa/motorcomm/chip.c @@ -1160,6 +1160,7 @@ yt921x_dsa_port_vlan_add(struct dsa_switch *ds, int port, static int yt921x_userport_standalone(struct yt921x_priv *priv, int port) { + struct yt921x_port *pp = &priv->ports[port]; u32 mask; u32 ctrl; int res; @@ -1183,13 +1184,24 @@ static int yt921x_userport_standalone(struct yt921x_priv *priv, int port) if (res) return res; - /* Unrelated since learning is off and all packets are trapped; - * set it anyway + /* Unrelated since learning is off and there is only one possible + * destination; set it anyway */ res = yt921x_port_set_pvid(priv, port, YT921X_VID_UNWARE); if (res) return res; + mask = BIT(port); + res = yt921x_reg_clear_bits(priv, YT921X_FILTER_UNK_UCAST, mask); + if (res) + return res; + res = yt921x_reg_clear_bits(priv, YT921X_FILTER_UNK_MCAST, mask); + if (res) + return res; + + pp->flood = true; + pp->mcast_flood = true; + return 0; } @@ -1225,6 +1237,20 @@ static int yt921x_isolate(struct yt921x_priv *priv, int port) return 0; } +static u16 yt921x_port_dest(struct yt921x_priv *priv, int port) +{ + struct dsa_switch *ds = &priv->ds; + struct net_device *bdev; + struct dsa_port *dp; + + dp = dsa_to_port(ds, port); + bdev = dsa_port_bridge_dev_get(dp); + if (!bdev) + return 0; + + return dsa_bridge_ports(ds, bdev) | priv->cpu_ports_mask; +} + /* Make sure to include the CPU port in ports_mask, or your bridge will * not have it. */ @@ -1268,7 +1294,72 @@ static int yt921x_bridge(struct yt921x_priv *priv, u16 ports_mask) return 0; } -static int yt921x_bridge_leave(struct yt921x_priv *priv, int port) +static int +yt921x_bridge_flood_set_type(struct yt921x_priv *priv, u16 ports_mask, int type) +{ + unsigned long targets_mask; + u16 flood_ports_xor; + u32 filter_ctrl; + u16 flood_mask; + u32 addr; + int port; + int res; + + ports_mask &= ~priv->cpu_ports_mask; + + flood_mask = 0; + targets_mask = ports_mask; + for_each_set_bit(port, &targets_mask, YT921X_PORT_NUM) { + struct yt921x_port *pp = &priv->ports[port]; + + if (!type ? pp->flood : pp->mcast_flood) + flood_mask |= BIT(port); + } + + flood_ports_xor = flood_mask ^ ports_mask; + filter_ctrl = 0; + targets_mask = ports_mask; + for_each_set_bit(port, &targets_mask, YT921X_PORT_NUM) { + struct yt921x_port *pp = &priv->ports[port]; + + /* Hardware never floods back to its own ingress port, keep + * hairpin port trapped: the software bridge does deliver a + * flood there. + */ + if (!pp->hairpin && !(flood_ports_xor & ~BIT(port))) + continue; + + filter_ctrl |= BIT(port); + } + + addr = !type ? YT921X_FILTER_UNK_UCAST : YT921X_FILTER_UNK_MCAST; + res = yt921x_reg_update_bits(priv, addr, ports_mask, filter_ctrl); + if (res) + return res; + + /* ACT_UNK is fixed to TRAP for every port, see yt921x_chip_setup_dsa(). + */ + + return 0; +} + +static int yt921x_bridge_flood_set(struct yt921x_priv *priv, u16 ports_mask) +{ + int res; + int ret; + + ret = 0; + for (int type = 0; type < 2; type++) { + res = yt921x_bridge_flood_set_type(priv, ports_mask, type); + if (res) + ret = res; + } + + return ret; +} + +static int +yt921x_bridge_leave(struct yt921x_priv *priv, int port, u16 other_ports_mask) { int res; @@ -1280,6 +1371,10 @@ static int yt921x_bridge_leave(struct yt921x_priv *priv, int port) if (res) return res; + res = yt921x_bridge_flood_set(priv, other_ports_mask); + if (res) + return res; + return 0; } @@ -1296,6 +1391,10 @@ yt921x_bridge_join(struct yt921x_priv *priv, int port, u16 ports_mask) if (res) return res; + res = yt921x_bridge_flood_set(priv, ports_mask); + if (res) + return res; + return 0; } @@ -1304,7 +1403,9 @@ yt921x_bridge_flags(struct yt921x_priv *priv, int port, struct switchdev_brport_flags flags) { struct yt921x_port *pp = &priv->ports[port]; - bool do_flush; + bool change_isolated = false; + bool change_flood = false; + u32 ports_mask; u32 mask; int res; @@ -1318,36 +1419,44 @@ yt921x_bridge_flags(struct yt921x_priv *priv, int port, return res; } - /* BR_FLOOD, BR_MCAST_FLOOD: see the comment where ACT_UNK_ACTn_TRAP - * is set - */ - /* BR_BCAST_FLOOD: we can filter bcast, but cannot trap them */ - do_flush = false; if (flags.mask & BR_HAIRPIN_MODE) { pp->hairpin = flags.val & BR_HAIRPIN_MODE; - do_flush = true; + change_isolated = true; + /* Hairpin also affects flood flags */ + change_flood = true; } if (flags.mask & BR_ISOLATED) { pp->isolated = flags.val & BR_ISOLATED; - do_flush = true; + change_isolated = true; } - if (do_flush) { - struct dsa_switch *ds = &priv->ds; - struct dsa_port *dp = dsa_to_port(ds, port); - struct net_device *bdev; - bdev = dsa_port_bridge_dev_get(dp); - if (bdev) { - u32 ports_mask; + if (flags.mask & BR_FLOOD) { + pp->flood = flags.val & BR_FLOOD; + change_flood = true; + } + if (flags.mask & BR_MCAST_FLOOD) { + pp->mcast_flood = flags.val & BR_MCAST_FLOOD; + change_flood = true; + } - ports_mask = dsa_bridge_ports(ds, bdev); - ports_mask |= priv->cpu_ports_mask; - res = yt921x_bridge(priv, ports_mask); - if (res) - return res; - } + if (!change_isolated && !change_flood) + return 0; + + ports_mask = yt921x_port_dest(priv, port); + if (!ports_mask) + return 0; + + if (change_isolated) { + res = yt921x_bridge(priv, ports_mask); + if (res) + return res; + } + if (change_flood) { + res = yt921x_bridge_flood_set(priv, ports_mask); + if (res) + return res; } return 0; @@ -1388,13 +1497,17 @@ yt921x_dsa_port_bridge_leave(struct dsa_switch *ds, int port, { struct yt921x_priv *priv = dsa_to_yt921x_priv(ds); struct device *dev = yt921x_priv_to_device(priv); + u16 ports_mask; int res; if (dsa_is_cpu_port(ds, port)) return; + ports_mask = dsa_bridge_ports(ds, bridge.dev); + ports_mask |= priv->cpu_ports_mask; + mutex_lock(&priv->reg_lock); - res = yt921x_bridge_leave(priv, port); + res = yt921x_bridge_leave(priv, port, ports_mask); mutex_unlock(&priv->reg_lock); if (res) @@ -2275,14 +2388,6 @@ static int yt921x_chip_setup_dsa(struct yt921x_priv *priv) if (res) return res; - ctrl = GENMASK(10, 0) & ~priv->cpu_ports_mask; - res = yt921x_reg_write(priv, YT921X_FILTER_UNK_UCAST, ctrl); - if (res) - return res; - res = yt921x_reg_write(priv, YT921X_FILTER_UNK_MCAST, ctrl); - if (res) - return res; - /* YT921x does not support native DSA port bridging, so we use port * isolation to emulate it. However, be especially careful that port * isolation takes _after_ FDB lookups, i.e. if an FDB entry (from @@ -2291,9 +2396,9 @@ static int yt921x_chip_setup_dsa(struct yt921x_priv *priv) * the "bridged" ports, thus we need to trap and handle those packets by * software. * - * If there is no more than one bridge, we might be able to drop them - * directly given some conditions are met, but we trap them in all cases - * for now. + * In some cases, we may offload the flood action to the hardware. This + * is done by fixing UNK_ACT to TRAP, and toggling the FILTER_UNK on the + * appropriate ports. */ ctrl = 0; for (int i = 0; i < YT921X_PORT_NUM; i++) diff --git a/drivers/net/dsa/motorcomm/chip.h b/drivers/net/dsa/motorcomm/chip.h index fc315f1d8f87..842fd8f83903 100644 --- a/drivers/net/dsa/motorcomm/chip.h +++ b/drivers/net/dsa/motorcomm/chip.h @@ -461,6 +461,10 @@ struct yt921x_port { bool hairpin:1; /* BR_ISOLATED */ bool isolated:1; + /* BR_FLOOD */ + bool flood:1; + /* BR_MCAST_FLOOD */ + bool mcast_flood:1; unsigned short acl_cnt; -- 2.53.0