Fix "alway" -> "always" in lan9303.txt and marvell,mv88e6xxx.yaml. Signed-off-by: Akiyoshi Kurita --- Documentation/devicetree/bindings/net/dsa/lan9303.txt | 4 ++-- .../devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 94f4f286cef9..46a732087f5c 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -16,9 +16,9 @@ Optional properties: Subnodes: The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. The CPU port of this switch is alway port 0. +described in dsa/dsa.txt. The CPU port of this switch is always port 0. -Note: alway use 'reg = <0/1/2>;' for the three DSA ports, even if the device is +Note: always use 'reg = <0/1/2>;' for the three DSA ports, even if the device is configured to use 1/2/3 instead. This hardware configuration will be auto-detected and mapped accordingly. diff --git a/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml index 170d8b74f6cf..19ae600e9339 100644 --- a/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml +++ b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml @@ -63,7 +63,7 @@ properties: interrupts: description: The switch provides an external interrupt line, but it is - not alway used by target systems. + not always used by target systems. maxItems: 1 interrupt-controller: @@ -72,7 +72,7 @@ properties: '#interrupt-cells': description: The internal interrupt controller only supports triggering - on active high level interrupts so the second cell must alway be set to + on active high level interrupts so the second cell must always be set to IRQ_TYPE_LEVEL_HIGH. const: 2 -- 2.47.3