Replace external_mask with xmii_mask and serdes_mask, and advertise the
interface modes it actually supports.

Also move struct yt921x_info into chip.h for future use.

Signed-off-by: David Yang <mmyangfl@gmail.com>
---
 drivers/net/dsa/motorcomm/chip.c | 39 ++++++++++++--------------------
 drivers/net/dsa/motorcomm/chip.h | 13 +++++++++++
 2 files changed, 27 insertions(+), 25 deletions(-)

diff --git a/drivers/net/dsa/motorcomm/chip.c b/drivers/net/dsa/motorcomm/chip.c
index 5acd7d27ff40..b527a9cfd3e8 100644
--- a/drivers/net/dsa/motorcomm/chip.c
+++ b/drivers/net/dsa/motorcomm/chip.c
@@ -96,53 +96,48 @@ static const struct yt921x_mib_desc yt921x_mib_descs[] = {
 	MIB_DESC(1, YT921X_MIB_DATA_TX_OAM, "TxOAM"),
 };
 
-struct yt921x_info {
-	const char *name;
-	u16 major;
-	/* Unknown, seems to be plain enumeration */
-	u8 mode;
-	u8 extmode;
-	/* Ports with integral GbE PHYs, not including MCU Port 10 */
-	u16 internal_mask;
-	/* TODO: see comments in yt921x_dsa_phylink_get_caps() */
-	u16 external_mask;
-};
-
 static const struct yt921x_info yt921x_infos[] = {
 	{
 		"YT9215SC", YT9215_MAJOR, 1, 0,
 		GENMASK(4, 0),
+		BIT(9),
 		BIT(8) | BIT(9),
 	},
 	{
 		"YT9215S", YT9215_MAJOR, 2, 0,
 		GENMASK(4, 0),
-		BIT(8) | BIT(9),
+		BIT(9),
+		BIT(8),
 	},
 	{
 		"YT9215RB", YT9215_MAJOR, 3, 0,
 		GENMASK(4, 0),
 		BIT(8) | BIT(9),
+		0,
 	},
 	{
 		"YT9214NB", YT9215_MAJOR, 3, 2,
 		BIT(1) | BIT(3),
-		BIT(8) | BIT(9),
+		BIT(9),
+		BIT(8),
 	},
 	{
 		"YT9213NB", YT9215_MAJOR, 3, 3,
 		BIT(1) | BIT(3),
 		BIT(9),
+		BIT(9),
 	},
 	{
 		"YT9218N", YT9218_MAJOR, 0, 0,
 		GENMASK(7, 0),
 		0,
+		0,
 	},
 	{
 		"YT9218MB", YT9218_MAJOR, 1, 0,
 		GENMASK(7, 0),
 		BIT(8) | BIT(9),
+		BIT(8) | BIT(9),
 	},
 	{}
 };
@@ -4021,15 +4016,10 @@ yt921x_dsa_phylink_get_caps(struct dsa_switch *ds, int port,
 		 */
 		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
 			  config->supported_interfaces);
-	} else if (info->external_mask & BIT(port)) {
-		/* TODO: external ports may support SERDES only, XMII only, or
-		 * SERDES + XMII depending on the chip. However, we can't get
-		 * the accurate config table due to lack of document, thus
-		 * we simply declare SERDES + XMII and rely on the correctness
-		 * of devicetree for now.
-		 */
+		return;
+	}
 
-		/* SERDES */
+	if (BIT(port) & info->serdes_mask) {
 		__set_bit(PHY_INTERFACE_MODE_SGMII,
 			  config->supported_interfaces);
 		/* REVSGMII (SGMII in PHY role) should go here, once
@@ -4042,9 +4032,8 @@ yt921x_dsa_phylink_get_caps(struct dsa_switch *ds, int port,
 		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
 			  config->supported_interfaces);
 		config->mac_capabilities |= MAC_2500FD;
-
-		/* XMII */
-
+	}
+	if (BIT(port) & info->xmii_mask) {
 		/* Not tested. To add support for XMII:
 		 *   - Add proper interface modes below
 		 *   - Handle them in yt921x_port_config()
diff --git a/drivers/net/dsa/motorcomm/chip.h b/drivers/net/dsa/motorcomm/chip.h
index 83cd454955dd..83e76cefbccd 100644
--- a/drivers/net/dsa/motorcomm/chip.h
+++ b/drivers/net/dsa/motorcomm/chip.h
@@ -960,6 +960,19 @@ struct yt921x_reg_ops {
 	int (*write)(void *context, u32 reg, u32 val);
 };
 
+struct yt921x_info {
+	const char *name;
+	u16 major;
+	/* Unknown, seems to be plain enumeration */
+	u8 mode;
+	u8 extmode;
+	/* Ports with integral GbE PHYs, not including MCU Port 10 */
+	u16 internal_mask;
+	/* Note: xmii_mask and serdes_mask may overlap */
+	u16 xmii_mask;
+	u16 serdes_mask;
+};
+
 struct yt921x_priv {
 	struct dsa_switch ds;
 
-- 
2.53.0