Since the driver always enables tx bounce buffer, there are minimum values for `copybreak` and `tx_spare_buf_size`. This patch will check and reject configurations with values smaller than these minimums. Closes: https://lore.kernel.org/all/20250723072900.GV2459@horms.kernel.org/ Signed-off-by: Jijie Shao --- .../ethernet/hisilicon/hns3/hns3_ethtool.c | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c index d5454e126c85..a752d0e3db3a 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c @@ -1927,6 +1927,31 @@ static int hns3_set_tx_spare_buf_size(struct net_device *netdev, return ret; } +static int hns3_check_tx_copybreak(struct net_device *netdev, u32 copybreak) +{ + struct hns3_nic_priv *priv = netdev_priv(netdev); + + if (copybreak < priv->min_tx_copybreak) { + netdev_err(netdev, "tx copybreak %u should be no less than %u!\n", + copybreak, priv->min_tx_copybreak); + return -EINVAL; + } + return 0; +} + +static int hns3_check_tx_spare_buf_size(struct net_device *netdev, u32 buf_size) +{ + struct hns3_nic_priv *priv = netdev_priv(netdev); + + if (buf_size < priv->min_tx_spare_buf_size) { + netdev_err(netdev, + "tx spare buf size %u should be no less than %u!\n", + buf_size, priv->min_tx_spare_buf_size); + return -EINVAL; + } + return 0; +} + static int hns3_set_tunable(struct net_device *netdev, const struct ethtool_tunable *tuna, const void *data) @@ -1943,6 +1968,10 @@ static int hns3_set_tunable(struct net_device *netdev, switch (tuna->id) { case ETHTOOL_TX_COPYBREAK: + ret = hns3_check_tx_copybreak(netdev, *(u32 *)data); + if (ret) + return ret; + priv->tx_copybreak = *(u32 *)data; for (i = 0; i < h->kinfo.num_tqps; i++) @@ -1957,6 +1986,10 @@ static int hns3_set_tunable(struct net_device *netdev, break; case ETHTOOL_TX_COPYBREAK_BUF_SIZE: + ret = hns3_check_tx_spare_buf_size(netdev, *(u32 *)data); + if (ret) + return ret; + old_tx_spare_buf_size = h->kinfo.tx_spare_buf_size; new_tx_spare_buf_size = *(u32 *)data; netdev_info(netdev, "request to set tx spare buf size from %u to %u\n", -- 2.33.0