KSZ8463's interrupt scheme differs from the others KSZ swicthes. Its
global interrupt handling is done through an 'enable irq' register
instead of a 'mask irq' one, so the bit logic to enable/disable
interrupt is reversed. Also its interrupts registers are 16-bits
registers and don't have the same address.

Add ksz8463-specific global interrupt setup function that still relies
on the ksz_irq_common_setup().
Add a check on the device type in the irq_chip operations to adjust the
bit logic for KSZ8463

Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
---
 drivers/net/dsa/microchip/ksz_common.c | 40 +++++++++++++++++++++++++++++-----
 drivers/net/dsa/microchip/ksz_common.h |  3 +++
 2 files changed, 37 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index e5fa1f5fc09b37c1a9d907175f8cd2cd60aee180..82ec7142a02c432f162e472c831faa010c035123 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -2817,14 +2817,20 @@ static void ksz_irq_mask(struct irq_data *d)
 {
 	struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
 
-	kirq->masked |= BIT(d->hwirq);
+	if (ksz_is_ksz8463(kirq->dev))
+		kirq->masked &= ~BIT(d->hwirq);
+	else
+		kirq->masked |= BIT(d->hwirq);
 }
 
 static void ksz_irq_unmask(struct irq_data *d)
 {
 	struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
 
-	kirq->masked &= ~BIT(d->hwirq);
+	if (ksz_is_ksz8463(kirq->dev))
+		kirq->masked |= BIT(d->hwirq);
+	else
+		kirq->masked &= ~BIT(d->hwirq);
 }
 
 static void ksz_irq_bus_lock(struct irq_data *d)
@@ -2840,7 +2846,10 @@ static void ksz_irq_bus_sync_unlock(struct irq_data *d)
 	struct ksz_device *dev = kirq->dev;
 	int ret;
 
-	ret = ksz_write8(dev, kirq->reg_mask, kirq->masked);
+	if (ksz_is_ksz8463(dev))
+		ret = ksz_write16(dev, kirq->reg_mask, kirq->masked);
+	else
+		ret = ksz_write8(dev, kirq->reg_mask, kirq->masked);
 	if (ret)
 		dev_err(dev->dev, "failed to change IRQ mask\n");
 
@@ -2890,14 +2899,14 @@ static irqreturn_t ksz_irq_thread_fn(int irq, void *dev_id)
 	unsigned int nhandled = 0;
 	struct ksz_device *dev;
 	unsigned int sub_irq;
-	u8 data;
+	u16 data;
 	int ret;
 	u8 n;
 
 	dev = kirq->dev;
 
 	/* Read interrupt status register */
-	ret = ksz_read8(dev, kirq->reg_status, &data);
+	ret = ksz_read16(dev, kirq->reg_status, &data);
 	if (ret)
 		goto out;
 
@@ -2939,6 +2948,22 @@ static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq)
 	return ret;
 }
 
+static int ksz8463_girq_setup(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_irq *girq = &dev->girq;
+
+	girq->nirqs = 15;
+	girq->reg_mask = KSZ8463_REG_IER;
+	girq->reg_status = KSZ8463_REG_ISR;
+	girq->masked = 0;
+	snprintf(girq->name, sizeof(girq->name), "global_irq");
+
+	girq->irq_num = dev->irq;
+
+	return ksz_irq_common_setup(dev, girq);
+}
+
 static int ksz_girq_setup(struct ksz_device *dev)
 {
 	struct ksz_irq *girq = &dev->girq;
@@ -3044,7 +3069,10 @@ static int ksz_setup(struct dsa_switch *ds)
 	p->learning = true;
 
 	if (dev->irq > 0) {
-		ret = ksz_girq_setup(dev);
+		if (ksz_is_ksz8463(dev))
+			ret = ksz8463_girq_setup(ds);
+		else
+			ret = ksz_girq_setup(dev);
 		if (ret)
 			return ret;
 
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 929aff4c55de5254defdc1afb52b224b3898233b..67a488a3b5787f93f9e2a9266ce04f6611b56bf8 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -839,6 +839,9 @@ static inline bool ksz_is_sgmii_port(struct ksz_device *dev, int port)
 #define KSZ87XX_INT_PME_MASK		BIT(4)
 
 /* Interrupt */
+#define KSZ8463_REG_ISR			0x190
+#define KSZ8463_REG_IER			0x192
+
 #define REG_SW_PORT_INT_STATUS__1	0x001B
 #define REG_SW_PORT_INT_MASK__1		0x001F
 

-- 
2.52.0