The receive interrupt handler schedules rx_tasklet after masking RX completion interrupts. synchronize_irq() waits for the hard IRQ, but it does not drain a tasklet that was already queued. The stop path then cleans the RX descriptors, and device removal later frees the rings and netdev. Kill the tasklet after resetting the device and synchronizing the IRQ, before cleaning the descriptor state. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jiale Yao --- drivers/net/ethernet/natsemi/ns83820.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/natsemi/ns83820.c b/drivers/net/ethernet/natsemi/ns83820.c index cdbf82affa7b..f31c15cb2f51 100644 --- a/drivers/net/ethernet/natsemi/ns83820.c +++ b/drivers/net/ethernet/natsemi/ns83820.c @@ -1536,6 +1536,7 @@ static int ns83820_stop(struct net_device *ndev) ns83820_do_reset(dev, CR_RST); synchronize_irq(dev->pci_dev->irq); + tasklet_kill(&dev->rx_tasklet); spin_lock_irq(&dev->misc_lock); dev->IMR_cache &= ~(ISR_TXURN | ISR_TXIDLE | ISR_TXERR | ISR_TXDESC | ISR_TXOK); -- 2.34.1