The Broadcom bcm54811 is hardware-strapped to select among RGMII and GMII/MII/MII-Lite modes. However, the corresponding bit, RGMII Enable in Miscellaneous Control Register must be also set to select desired RGMII or MII(-lite)/GMII mode. Fixes: 3117a11fff5af9e7 ("net: phy: bcm54811: PHY initialization") Signed-off-by: Kamil Horák - 2N --- drivers/net/phy/broadcom.c | 20 +++++++++++++++++++- include/linux/brcmphy.h | 1 + 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 3459a0e9d8b9..cb306f9e80cc 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -405,7 +405,7 @@ static int bcm5481x_set_brrmode(struct phy_device *phydev, bool on) static int bcm54811_config_init(struct phy_device *phydev) { struct bcm54xx_phy_priv *priv = phydev->priv; - int err, reg, exp_sync_ethernet; + int err, reg, exp_sync_ethernet, aux_rgmii_en; /* Enable CLK125 MUX on LED4 if ref clock is enabled. */ if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) { @@ -434,6 +434,24 @@ static int bcm54811_config_init(struct phy_device *phydev) if (err < 0) return err; + /* Enable RGMII if configured */ + if (phy_interface_is_rgmii(phydev)) + aux_rgmii_en = MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN | + MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN; + else + aux_rgmii_en = 0; + + /* Also writing Reserved bits 6:5 because the documentation requires + * them to be written to 0b11 + */ + err = bcm54xx_auxctl_write(phydev, + MII_BCM54XX_AUXCTL_SHDWSEL_MISC, + MII_BCM54XX_AUXCTL_MISC_WREN | + aux_rgmii_en | + MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RSVD); + if (err < 0) + return err; + return bcm5481x_set_brrmode(phydev, priv->brr_mode); } diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 15c35655f482..115a964f3006 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -137,6 +137,7 @@ #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RSVD 0x0060 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN 0x0080 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100 #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 -- 2.39.5