Hardware reports a list of PHY status IE. In monitor mode, IE-09 of PHY status is enabled, and the report contains trailing 8-byte zeros, causing failed to parse and drop all IE information. The 8 zeros are recognize as IE type 0, but length of type 0 must be not 8 (reference to rtw89_phy_gen_def::physt_ie_len[0]). Check and skip them. Signed-off-by: Ping-Ke Shih --- drivers/net/wireless/realtek/rtw89/core.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c index 7e1182a49942..fddb0c822c28 100644 --- a/drivers/net/wireless/realtek/rtw89/core.c +++ b/drivers/net/wireless/realtek/rtw89/core.c @@ -2275,6 +2275,13 @@ static int rtw89_core_rx_parse_phy_sts(struct rtw89_dev *rtwdev, while (pos < end) { const struct rtw89_phy_sts_iehdr *iehdr = pos; + /* + * RTL8922D might reports 8 bytes zeros at end if IE09 presents. + * Check and ignore the zeros. + */ + if (unlikely(phy_ppdu->ie09 && end - pos == 8 && iehdr->w0 == 0)) + break; + ie_len = rtw89_core_get_phy_status_ie_len(rtwdev, iehdr); pos += ie_len; if (pos > end || ie_len == 0) { -- 2.25.1