The DP83867 PHY has four distinct power supplies: VDDA2P5 -- 2.5V analog supply VDD1P0 -- 1.0V digital supply VDDA1P8 -- 1.8V analog supply VDDIO -- I/O supply, which can be 3.3V or 2.5V or 1.8V The DP83867E/IS/CS datasheet (section 8.3) describes two power supply configurations - "two-supply" and "three-supply". 1. Two-Supply Configuration: VDDA2P5 and VDD1P0 connected, and the VDDA1P8 pins are left unconnected. 2. Three-Supply Configuration: VDDA2P5, VDD1P0 and VDDA1P8 are all connected. VDDIO is a separate fourth supply present in both configurations. The datasheet specifies that it can either be 1.8V or 2.5V or 3.3V. Some embedded board design expose a GPIO-controlled regulator to control any one or more of these supplies. Therefore, document all four of the available supply properties. Signed-off-by: Mohd Ayaan Anwar --- v4: This patch was accidentally dropped in v3. It has been re-added as-is from v2. --- Documentation/devicetree/bindings/net/ti,dp83867.yaml | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml index 4bc1f98fd9fe..e78f08ded3d0 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml @@ -118,6 +118,20 @@ properties: Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values. + vdda-2p5-supply: + description: 2.5V analog supply (connected to the VDDA2P5 pins). + + vdd-1p0-supply: + description: 1.0V digital core supply (connected to the VDD1P0 pins). + + vdda-1p8-supply: + description: 1.8V analog supply (connected to the VDDA1P8 pins). + + vddio-supply: + description: | + I/O supply (connected to the VDDIO pins). The supply can be 1.8V, + 2.5V or 3.3V. + required: - reg -- 2.34.1