The current code incorrectly passes (XIRCREG1_ECR | FullDuplex) as the register address to GetByte(), instead of fetching the register value and OR-ing it with FullDuplex. This results in an invalid register access. Fix it by reading XIRCREG1_ECR first, then or-ing with FullDuplex before writing it back. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Alok Tiwari --- This patch is untested due to hardware limitations. If the Fixes tag is not required, it can be removed. --- drivers/net/ethernet/xircom/xirc2ps_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/xircom/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c index a31d5d5e6593..97e88886253f 100644 --- a/drivers/net/ethernet/xircom/xirc2ps_cs.c +++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c @@ -1576,7 +1576,7 @@ do_reset(struct net_device *dev, int full) msleep(40); /* wait 40 msec to let it complete */ } if (full_duplex) - PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex)); + PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR) | FullDuplex); } else { /* No MII */ SelectPage(0); value = GetByte(XIRCREG_ESR); /* read the ESR */ -- 2.50.1