Rename the "por" and "num_por" members to indicate that they are for
RGMII mode only as ethqos_configure_rgmii() is the only place that the
values are programmed into the registers.

Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 34 +++++++++----------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index af8204c0e188..690bd5c7e1a6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -87,8 +87,8 @@ struct ethqos_emac_por {
 };
 
 struct ethqos_emac_driver_data {
-	const struct ethqos_emac_por *por;
-	unsigned int num_por;
+	const struct ethqos_emac_por *rgmii_por;
+	unsigned int num_rgmii_por;
 	bool rgmii_config_loopback_en;
 	bool has_emac_ge_3;
 	const char *link_clk_name;
@@ -108,8 +108,8 @@ struct qcom_ethqos {
 	int serdes_speed;
 	phy_interface_t phy_mode;
 
-	const struct ethqos_emac_por *por;
-	unsigned int num_por;
+	const struct ethqos_emac_por *rgmii_por;
+	unsigned int num_rgmii_por;
 	bool rgmii_config_loopback_en;
 	bool has_emac_ge_3;
 	bool needs_sgmii_loopback;
@@ -218,8 +218,8 @@ static const struct ethqos_emac_por emac_v2_3_0_por[] = {
 };
 
 static const struct ethqos_emac_driver_data emac_v2_3_0_data = {
-	.por = emac_v2_3_0_por,
-	.num_por = ARRAY_SIZE(emac_v2_3_0_por),
+	.rgmii_por = emac_v2_3_0_por,
+	.num_rgmii_por = ARRAY_SIZE(emac_v2_3_0_por),
 	.rgmii_config_loopback_en = true,
 	.has_emac_ge_3 = false,
 };
@@ -234,8 +234,8 @@ static const struct ethqos_emac_por emac_v2_1_0_por[] = {
 };
 
 static const struct ethqos_emac_driver_data emac_v2_1_0_data = {
-	.por = emac_v2_1_0_por,
-	.num_por = ARRAY_SIZE(emac_v2_1_0_por),
+	.rgmii_por = emac_v2_1_0_por,
+	.num_rgmii_por = ARRAY_SIZE(emac_v2_1_0_por),
 	.rgmii_config_loopback_en = false,
 	.has_emac_ge_3 = false,
 };
@@ -250,8 +250,8 @@ static const struct ethqos_emac_por emac_v3_0_0_por[] = {
 };
 
 static const struct ethqos_emac_driver_data emac_v3_0_0_data = {
-	.por = emac_v3_0_0_por,
-	.num_por = ARRAY_SIZE(emac_v3_0_0_por),
+	.rgmii_por = emac_v3_0_0_por,
+	.num_rgmii_por = ARRAY_SIZE(emac_v3_0_0_por),
 	.rgmii_config_loopback_en = false,
 	.has_emac_ge_3 = true,
 	.dwmac4_addrs = {
@@ -282,8 +282,8 @@ static const struct ethqos_emac_por emac_v4_0_0_por[] = {
 };
 
 static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
-	.por = emac_v4_0_0_por,
-	.num_por = ARRAY_SIZE(emac_v4_0_0_por),
+	.rgmii_por = emac_v4_0_0_por,
+	.num_rgmii_por = ARRAY_SIZE(emac_v4_0_0_por),
 	.rgmii_config_loopback_en = false,
 	.has_emac_ge_3 = true,
 	.link_clk_name = "phyaux",
@@ -522,9 +522,9 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos, int speed)
 	u32 val;
 
 	/* Reset to POR values and enable clk */
-	for (i = 0; i < ethqos->num_por; i++)
-		rgmii_writel(ethqos, ethqos->por[i].value,
-			     ethqos->por[i].offset);
+	for (i = 0; i < ethqos->num_rgmii_por; i++)
+		rgmii_writel(ethqos, ethqos->rgmii_por[i].value,
+			     ethqos->rgmii_por[i].offset);
 	ethqos_set_func_clk_en(ethqos);
 
 	/* Initialize the DLL first */
@@ -780,8 +780,8 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 				     "Failed to map rgmii resource\n");
 
 	data = of_device_get_match_data(dev);
-	ethqos->por = data->por;
-	ethqos->num_por = data->num_por;
+	ethqos->rgmii_por = data->rgmii_por;
+	ethqos->num_rgmii_por = data->num_rgmii_por;
 	ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
 	ethqos->has_emac_ge_3 = data->has_emac_ge_3;
 	ethqos->needs_sgmii_loopback = data->needs_sgmii_loopback;
-- 
2.47.3