From: Lad Prabhakar Update the Kconfig entry for the RZN1 A5PSW tag driver to reflect that the same tagging format is also used by the ETHSW blocks found in Renesas RZ/T2H and RZ/N2H SoCs. Signed-off-by: Lad Prabhakar --- net/dsa/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index f86b30742122..a00eb3bdcd0f 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -159,11 +159,11 @@ config NET_DSA_TAG_RTL8_4 switches with 8 byte protocol 4 tags, such as the Realtek RTL8365MB-VC. config NET_DSA_TAG_RZN1_A5PSW - tristate "Tag driver for Renesas RZ/N1 A5PSW switch" + tristate "Tag driver for Renesas RZ/N1 A5PSW and RZ/{T2H,N2H} ETHSW switches" help Say Y or M if you want to enable support for tagging frames for - Renesas RZ/N1 embedded switch that uses an 8 byte tag located after - destination MAC address. + Renesas RZ/N1 A5PSW and RZ/{T2H,N2H} ETHSW embedded switches that use + an 8-byte tag located after the destination MAC address. config NET_DSA_TAG_LAN9303 tristate "Tag driver for SMSC/Microchip LAN9303 family of switches" -- 2.52.0