7.3-stable review patch. If anyone has any objections, please let me know. ------------------ From: Judith Mendez [ Upstream commit c074abebc76f0e59d13dea499f582806c6a3d94d ] MMC clock pins must be configured as OUTPUT-only per TRM [0] with receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from PIN_INPUT to PIN_OUTPUT to match documentation. [0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals Fixes: f5a731f0787f ("arm64: dts: ti: Add k3-am625-beagleplay") Cc: stable@vger.kernel.org Signed-off-by: Judith Mendez Reviewed-by: Moteen Shah Link: https://patch.msgid.link/20260909214743.899477-9-jm@ti.com Signed-off-by: Nishanth Menon Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index c468b9c5fc09a..898e4ca3fd87e 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -323,7 +323,7 @@ emmc_pins_default: emmc-default-pins { bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x0220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ - AM62X_IOPAD(0x0218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x0218, PIN_OUTPUT, 0) /* (AB1) MMC0_CLK */ AM62X_IOPAD(0x0214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ AM62X_IOPAD(0x0210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */ AM62X_IOPAD(0x020c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */ @@ -346,7 +346,7 @@ sd_pins_default: sd-default-pins { bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ - AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22) MMC1_CLK */ + AM62X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (B22) MMC1_CLK */ AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */ AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */ AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */ @@ -358,7 +358,7 @@ AM62X_IOPAD(0x0240, PIN_INPUT, 7) /* (D17) MMC1_SDCD.GPIO1_48 */ wifi_pins_default: wifi-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0120, PIN_INPUT, 0) /* (C24) MMC2_CMD */ - AM62X_IOPAD(0x0118, PIN_INPUT, 0) /* (D25) MMC2_CLK */ + AM62X_IOPAD(0x0118, PIN_OUTPUT, 0) /* (D25) MMC2_CLK */ AM62X_IOPAD(0x0114, PIN_INPUT, 0) /* (B24) MMC2_DAT0 */ AM62X_IOPAD(0x0110, PIN_INPUT, 0) /* (C25) MMC2_DAT1 */ AM62X_IOPAD(0x010c, PIN_INPUT, 0) /* (E23) MMC2_DAT2 */ -- 2.53.0