6.18-stable review patch. If anyone has any objections, please let me know. ------------------ From: Judith Mendez [ Upstream commit aa7d5b1efa75e58c9d440dfd720205045fe6a806 ] MMC clock pins must be configured as OUTPUT-only per TRM [0] with receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from PIN_INPUT to PIN_OUTPUT to match documentation. [0] https://www.ti.com/lit/pdf/spruj16 Rev. C: Table 12-257. MMCSDi I/O Signals Fixes: e041ec6e86e7 ("arm64: dts: ti: k3-am62a7-sk: Enable eMMC support") Cc: stable@vger.kernel.org Signed-off-by: Judith Mendez Reviewed-by: Moteen Shah Link: https://patch.msgid.link/20260909214743.899477-4-jm@ti.com Signed-off-by: Nishanth Menon Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index 29e7673dde331..a9141640c35e6 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -313,7 +313,7 @@ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ main_mmc0_pins_default: main-mmc0-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ - AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62AX_IOPAD(0x218, PIN_OUTPUT, 0) /* (AB1) MMC0_CLK */ AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ -- 2.53.0