To make this part of the code mode reusable move all
EEE input checks out of ixgbe_set_eee().

Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
---
 .../net/ethernet/intel/ixgbe/ixgbe_ethtool.c  | 95 +++++++++++--------
 1 file changed, 54 insertions(+), 41 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index 5764530b9667..7a7a58fd065d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -3551,6 +3551,44 @@ static const struct {
 	{ FW_PHY_ACT_UD_2_10G_KR_EEE, ETHTOOL_LINK_MODE_10000baseKR_Full_BIT},
 };
 
+static int ixgbe_validate_keee(struct net_device *netdev,
+			       struct ethtool_keee *keee_requested)
+{
+	struct ixgbe_adapter *adapter = ixgbe_from_netdev(netdev);
+	struct ethtool_keee keee_stored = {};
+	int err;
+
+	if (!(adapter->flags2 & IXGBE_FLAG2_EEE_CAPABLE))
+		return -EOPNOTSUPP;
+
+	err = netdev->ethtool_ops->get_eee(netdev, &keee_stored);
+	if (err)
+		return err;
+
+	if (keee_stored.tx_lpi_enabled != keee_requested->tx_lpi_enabled) {
+		e_err(drv, "Setting EEE tx-lpi is not supported\n");
+		return -EINVAL;
+	}
+
+	if (keee_stored.tx_lpi_timer != keee_requested->tx_lpi_timer) {
+		e_err(drv,
+		      "Setting EEE Tx LPI timer is not supported\n");
+		return -EINVAL;
+	}
+
+	if (!linkmode_equal(keee_stored.advertised,
+			    keee_requested->advertised)) {
+		e_err(drv,
+		      "Setting EEE advertised speeds is not supported\n");
+		return -EINVAL;
+	}
+
+	if (keee_stored.eee_enabled == keee_requested->eee_enabled)
+		return -EALREADY;
+
+	return 0;
+}
+
 static int
 ixgbe_get_eee_fw(struct ixgbe_adapter *adapter, struct ethtool_keee *edata)
 {
@@ -3609,53 +3647,28 @@ static int ixgbe_set_eee(struct net_device *netdev, struct ethtool_keee *edata)
 {
 	struct ixgbe_adapter *adapter = ixgbe_from_netdev(netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
-	struct ethtool_keee eee_data;
 	int ret_val;
 
-	if (!(adapter->flags2 & IXGBE_FLAG2_EEE_CAPABLE))
-		return -EOPNOTSUPP;
-
-	memset(&eee_data, 0, sizeof(struct ethtool_keee));
-
-	ret_val = ixgbe_get_eee(netdev, &eee_data);
-	if (ret_val)
+	ret_val = ixgbe_validate_keee(netdev, edata);
+	if (ret_val == -EALREADY)
+		return 0;
+	else if (ret_val)
 		return ret_val;
 
-	if (eee_data.eee_enabled && !edata->eee_enabled) {
-		if (eee_data.tx_lpi_enabled != edata->tx_lpi_enabled) {
-			e_err(drv, "Setting EEE tx-lpi is not supported\n");
-			return -EINVAL;
-		}
-
-		if (eee_data.tx_lpi_timer != edata->tx_lpi_timer) {
-			e_err(drv,
-			      "Setting EEE Tx LPI timer is not supported\n");
-			return -EINVAL;
-		}
-
-		if (!linkmode_equal(eee_data.advertised, edata->advertised)) {
-			e_err(drv,
-			      "Setting EEE advertised speeds is not supported\n");
-			return -EINVAL;
-		}
+	if (edata->eee_enabled) {
+		adapter->flags2 |= IXGBE_FLAG2_EEE_ENABLED;
+		hw->phy.eee_speeds_advertised =
+					   hw->phy.eee_speeds_supported;
+	} else {
+		adapter->flags2 &= ~IXGBE_FLAG2_EEE_ENABLED;
+		hw->phy.eee_speeds_advertised = 0;
 	}
 
-	if (eee_data.eee_enabled != edata->eee_enabled) {
-		if (edata->eee_enabled) {
-			adapter->flags2 |= IXGBE_FLAG2_EEE_ENABLED;
-			hw->phy.eee_speeds_advertised =
-						   hw->phy.eee_speeds_supported;
-		} else {
-			adapter->flags2 &= ~IXGBE_FLAG2_EEE_ENABLED;
-			hw->phy.eee_speeds_advertised = 0;
-		}
-
-		/* reset link */
-		if (netif_running(netdev))
-			ixgbe_reinit_locked(adapter);
-		else
-			ixgbe_reset(adapter);
-	}
+	/* reset link */
+	if (netif_running(netdev))
+		ixgbe_reinit_locked(adapter);
+	else
+		ixgbe_reset(adapter);
 
 	return 0;
 }
-- 
2.31.1