tja1102_p0_probe() schedules work to register the second port. The work uses the Port 0 private data and phydev. The private data is devm-allocated, but the driver did not cancel the work before detach. Store the Port 0 private data in phydev->priv and add a remove callback. The callback waits for the registration work before devres can free it. This issue was found by a static analysis tool. Signed-off-by: Hongyan Xu --- drivers/net/phy/nxp-tja11xx.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c index 07e94a247..68062a4c5 100644 --- a/drivers/net/phy/nxp-tja11xx.c +++ b/drivers/net/phy/nxp-tja11xx.c @@ -620,6 +620,7 @@ static int tja1102_p0_probe(struct phy_device *phydev) return -ENOMEM; priv->phydev = phydev; + phydev->priv = priv; INIT_WORK(&priv->phy_register_work, tja1102_p1_register); ret = tja11xx_hwmon_register(phydev, priv); @@ -631,6 +632,13 @@ static int tja1102_p0_probe(struct phy_device *phydev) return 0; } +static void tja1102_p0_remove(struct phy_device *phydev) +{ + struct tja11xx_priv *priv = phydev->priv; + + cancel_work_sync(&priv->phy_register_work); +} + static int tja1102_match_phy_device(struct phy_device *phydev, bool port0) { int ret; @@ -847,6 +855,7 @@ static struct phy_driver tja11xx_driver[] = { .features = PHY_BASIC_T1_FEATURES, .flags = PHY_POLL_CABLE_TEST, .probe = tja1102_p0_probe, + .remove = tja1102_p0_remove, .soft_reset = tja11xx_soft_reset, .config_aneg = tja11xx_config_aneg, .config_init = tja11xx_config_init, -- 2.50.1.windows.1