7.3-stable review patch. If anyone has any objections, please let me know. ------------------ From: Judith Mendez [ Upstream commit 9852f2badc438de82b6828c11c80ef0a656f1d4d ] MMC0_CLKLB and MMC0_CLK have incorrectly swapped register addresses as per datasheet [0]. Set the correct MMC0_CLK address and drop the unneeded MMC0_CLKLB pin configuration. [0] https://www.ti.com/lit/gpn/am62a7 Rev. E: Table 5-1. Pin Attributes Fixes: e041ec6e86e7 ("arm64: dts: ti: k3-am62a7-sk: Enable eMMC support") Cc: stable@vger.kernel.org Signed-off-by: Judith Mendez Reviewed-by: Moteen Shah Acked-by: Udit Kumar Link: https://patch.msgid.link/20260909214743.899477-2-jm@ti.com Signed-off-by: Nishanth Menon Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index d3b3675e7a8fc..b04636cab71c7 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -328,8 +328,7 @@ AM62AX_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */ main_mmc0_pins_default: main-mmc0-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ - AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLKLB */ - AM62AX_IOPAD(0x21c, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62AX_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ AM62AX_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ -- 2.53.0