6.18-stable review patch. If anyone has any objections, please let me know. ------------------ From: Judith Mendez [ Upstream commit 4834050197f205a649e36661ca150e6ac8295008 ] MMC clock pins must be configured as OUTPUT-only per TRM [0] with receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from PIN_INPUT to PIN_OUTPUT to match documentation. [0] https://www.ti.com/lit/pdf/spruj16 Rev. C: Table 12-257. MMCSDi I/O Signals Fixes: d69383885576 ("arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM62Ax") Cc: stable@vger.kernel.org Signed-off-by: Judith Mendez Reviewed-by: Moteen Shah Acked-by: Wadim Egorov Link: https://patch.msgid.link/20260909214743.899477-6-jm@ti.com Signed-off-by: Nishanth Menon Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi index b3d012a5a26aa..9da48a54855e0 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi @@ -120,7 +120,7 @@ AM62AX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */ main_mmc0_pins_default: main-mmc0-default-pins { pinctrl-single,pins = < AM62AX_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */ - AM62AX_IOPAD(0x218, PIN_INPUT_PULLDOWN, 0) /* (AB7) MMC0_CLK */ + AM62AX_IOPAD(0x218, PIN_OUTPUT_PULLDOWN, 0) /* (AB7) MMC0_CLK */ AM62AX_IOPAD(0x214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */ AM62AX_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */ AM62AX_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */ -- 2.53.0