From: Francesco Dolcini The Capacitive Touch Display 7" Parallel with Touch Adapter and the Resistive Touch Display 7" Parallel overlays are only built as a dependency of the combined Eval carrier board DTBs and are not listed in dtb-y, so the standalone .dtbo files are not installed by dtbs_install. Add them to dtb-y like the other Colibri iMX7 eMMC overlays. Fixes: 64e7d6ba2037 ("ARM: dts: imx7d-colibri-emmc: Add Toradex Capacitive Touch Display 7" Parallel with Touch Adapter") Fixes: 392bbdb0357b ("ARM: dts: imx7d-colibri-emmc: Add Toradex Resistive Touch Display 7" Parallel") Signed-off-by: Francesco Dolcini --- v2: no changes --- arch/arm/boot/dts/nxp/imx/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile index a0ad7ee583e8..f22abbd01434 100644 --- a/arch/arm/boot/dts/nxp/imx/Makefile +++ b/arch/arm/boot/dts/nxp/imx/Makefile @@ -472,6 +472,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-colibri-emmc-eval-v3-panel-res-touch-7inch-parallel.dtb \ imx7d-colibri-emmc-eval-v3-vga.dtb \ imx7d-colibri-emmc-panel-cap-touch-7inch-parallel.dtbo \ + imx7d-colibri-emmc-panel-cap-touch-7inch-parallel-touch-adapter.dtbo \ + imx7d-colibri-emmc-panel-res-touch-7inch-parallel.dtbo \ imx7d-colibri-emmc-vga.dtbo \ imx7d-colibri-eval-v3.dtb \ imx7d-colibri-iris.dtb \ -- 2.47.3