The firmware of RTL8822BU does not always report the TX status of a frame within RTW_TX_PROBE_TIMEOUT (500 ms). The purge timer then drops the tracking skbs and the driver warns rtw_8822bu 3-1:1.0: failed to get tx report from firmware every one to three seconds on an access point serving clients that use power save. The dropped skbs never reach ieee80211_tx_status_irqsafe(), so mac80211 never learns the ACK status of the frames it asked to track. hostapd uses that status to tell whether a polled station is still there, so it can treat a responsive station as inactive and eventually disconnect it. Commit c80788f7c5ae ("wifi: rtw88: increase TX report timeout to fix race condition") raised the timeout to 2500 ms for RTL8723DU, where the firmware stays off-channel during background scans for longer than the original 500 ms. RTL8822BU needs the same treatment. A similar change was proposed for RTL8822BU in May 2026 but was never resubmitted, see the Link below. Tested on a TP-Link Archer T4U v3 (RTL8812BU, handled by rtw_8822bu) as a 2.4 GHz AP with six associated clients: the warning appeared about once every 2.3 seconds before the change and not once in 67 minutes with it. Fixes: a82dfd33d123 ("wifi: rtw88: Add common USB chip support") Cc: stable@vger.kernel.org Link: https://lists.openwall.net/linux-kernel/2026/05/31/713 Signed-off-by: Josef Schlehofer --- drivers/net/wireless/realtek/rtw88/tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtw88/tx.c b/drivers/net/wireless/realtek/rtw88/tx.c index 4e110a457..55d7923e1 100644 --- a/drivers/net/wireless/realtek/rtw88/tx.c +++ b/drivers/net/wireless/realtek/rtw88/tx.c @@ -208,7 +208,8 @@ void rtw_tx_report_enqueue(struct rtw_dev *rtwdev, struct sk_buff *skb, u8 sn) __skb_queue_tail(&tx_report->queue, skb); spin_unlock_irqrestore(&tx_report->q_lock, flags); - if ((rtwdev->chip->id == RTW_CHIP_TYPE_8723D && + if (((rtwdev->chip->id == RTW_CHIP_TYPE_8723D || + rtwdev->chip->id == RTW_CHIP_TYPE_8822B) && rtwdev->hci.type == RTW_HCI_TYPE_USB) || rtw_is_8723bs(rtwdev)) timeout = msecs_to_jiffies(2500); base-commit: 73e3b1c94c7d5b4a113e7cbb42665dc2fe3b9d78 -- 2.54.0 (Apple Git-157)