From: Francesco Dolcini The LED driver of the Toradex 7" parallel displays turns the backlight off below roughly 15% PWM duty cycle, with the current brightness levels only the three highest ones produce a visible image. Use the same brightness levels as on the Colibri iMX7, which is used with the same displays, keeping the default brightness at about the same value. Signed-off-by: Francesco Dolcini --- v2: no changes --- arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi index 1eb1cf2d7395..dd2dc23f0cf1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri.dtsi @@ -14,8 +14,8 @@ aliases { backlight: backlight { compatible = "pwm-backlight"; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <6>; + brightness-levels = <0 45 63 88 119 158 203 255>; + default-brightness-level = <4>; enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_bl_on>; -- 2.47.3