Convert the marvell,armada3710-(sb|nb)-pinctrl binding to DT schema format. The binding includes the "marvell,armada-3700-xtal-clock" subnode which is simple enough to include here. Signed-off-by: Rob Herring (Arm) --- .../bindings/clock/armada3700-xtal-clock.txt | 29 --- .../marvell,armada-3710-xb-pinctrl.yaml | 122 +++++++++++ .../pinctrl/marvell,armada-37xx-pinctrl.txt | 195 ------------------ 3 files changed, 122 insertions(+), 224 deletions(-) delete mode 100644 Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-3710-xb-pinctrl.yaml delete mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt deleted file mode 100644 index 4c0807f28cfa..000000000000 --- a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Xtal Clock bindings for Marvell Armada 37xx SoCs - -Marvell Armada 37xx SoCs allow to determine the xtal clock frequencies by -reading the gpio latch register. - -This node must be a subnode of the node exposing the register address -of the GPIO block where the gpio latch is located. -See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt - -Required properties: -- compatible : shall be one of the following: - "marvell,armada-3700-xtal-clock" -- #clock-cells : from common clock binding; shall be set to 0 - -Optional properties: -- clock-output-names : from common clock binding; allows overwrite default clock - output names ("xtal") - -Example: -pinctrl_nb: pinctrl-nb@13800 { - compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd"; - reg = <0x13800 0x100>, <0x13C00 0x20>; - - xtalclk: xtal-clk { - compatible = "marvell,armada-3700-xtal-clock"; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-3710-xb-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,armada-3710-xb-pinctrl.yaml new file mode 100644 index 000000000000..c4d09d8720bd --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-3710-xb-pinctrl.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,armada-3710-xb-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 37xx SoC pin and gpio controller + +maintainers: + - Gregory CLEMENT + - Marek Behún + - Miquel Raynal + +description: > + Each Armada 37xx SoC come with two pin and gpio controller one for the south + bridge and the other for the north bridge. + + Inside this set of register the gpio latch allows exposing some configuration + of the SoC and especially the clock frequency of the xtal. Hence, this node is + a represent as syscon allowing sharing the register between multiple hardware + block. + +properties: + compatible: + items: + - enum: + - marvell,armada3710-sb-pinctrl + - marvell,armada3710-nb-pinctrl + - const: syscon + - const: simple-mfd + + reg: + items: + - description: pinctrl and GPIO controller registers + - description: interrupt controller registers + + gpio: + description: GPIO controller subnode + type: object + additionalProperties: false + + properties: + '#gpio-cells': + const: 2 + + gpio-controller: true + + gpio-ranges: + description: Range of pins managed by the GPIO controller + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + + interrupts: + description: List of interrupt specifiers for the GPIO controller + + required: + - '#gpio-cells' + - gpio-ranges + - gpio-controller + - '#interrupt-cells' + - interrupt-controller + - interrupts + + xtal-clk: + type: object + additionalProperties: false + + properties: + compatible: + const: marvell,armada-3700-xtal-clock + + '#clock-cells': + const: 0 + + clock-output-names: true + +patternProperties: + '-pins$': + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + groups: + enum: [ emmc_nb, i2c1, i2c2, jtag, mii_col, onewire, pcie1, + pcie1_clkreq, pcie1_wakeup, pmic0, pmic1, ptp, ptp_clk, + ptp_trig, pwm0, pwm1, pwm2, pwm3, rgmii, sdio0, sdio_sb, smi, + spi_cs1, spi_cs2, spi_cs3, spi_quad, uart1, uart2, + usb2_drvvbus1, usb32_drvvbus ] + + function: + enum: [ drvbus, emmc, gpio, i2c, jtag, led, mii, mii_err, onewire, + pcie, pmic, ptp, pwm, sdio, smi, spi, uart ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + + pinctrl_sb: pinctrl@18800 { + compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; + reg = <0x18800 0x100>, <0x18C00 0x20>; + + gpio { + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_sb 0 0 29>; + gpio-controller; + interrupts = + , + , + , + , + ; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt deleted file mode 100644 index ecec514b3155..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ /dev/null @@ -1,195 +0,0 @@ -* Marvell Armada 37xx SoC pin and gpio controller - -Each Armada 37xx SoC come with two pin and gpio controller one for the -south bridge and the other for the north bridge. - -Inside this set of register the gpio latch allows exposing some -configuration of the SoC and especially the clock frequency of the -xtal. Hence, this node is a represent as syscon allowing sharing the -register between multiple hardware block. - -GPIO and pin controller: ------------------------- - -Main node: - -Refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning -of the phrase "pin configuration node". - -Required properties for pinctrl driver: - -- compatible: "marvell,armada3710-sb-pinctrl", "syscon, "simple-mfd" - for the south bridge - "marvell,armada3710-nb-pinctrl", "syscon, "simple-mfd" - for the north bridge -- reg: The first set of register are for pinctrl/gpio and the second - set for the interrupt controller -- interrupts: list of the interrupt use by the gpio - -Available groups and functions for the North bridge: - -group: jtag - - pins 20-24 - - functions jtag, gpio - -group sdio0 - - pins 8-10 - - functions sdio, gpio - -group emmc_nb - - pins 27-35 - - functions emmc, gpio - -group pwm0 - - pin 11 (GPIO1-11) - - functions pwm, led, gpio - -group pwm1 - - pin 12 - - functions pwm, led, gpio - -group pwm2 - - pin 13 - - functions pwm, led, gpio - -group pwm3 - - pin 14 - - functions pwm, led, gpio - -group pmic1 - - pin 7 - - functions pmic, gpio - -group pmic0 - - pin 6 - - functions pmic, gpio - -group i2c2 - - pins 2-3 - - functions i2c, gpio - -group i2c1 - - pins 0-1 - - functions i2c, gpio - -group spi_cs1 - - pin 17 - - functions spi, gpio - -group spi_cs2 - - pin 18 - - functions spi, gpio - -group spi_cs3 - - pin 19 - - functions spi, gpio - -group onewire - - pin 4 - - functions onewire, gpio - -group uart1 - - pins 25-26 - - functions uart, gpio - -group spi_quad - - pins 15-16 - - functions spi, gpio - -group uart2 - - pins 9-10 and 18-19 - - functions uart, gpio - -Available groups and functions for the South bridge: - -group usb32_drvvbus0 - - pin 36 - - functions drvbus, gpio - -group usb2_drvvbus1 - - pin 37 - - functions drvbus, gpio - -group sdio_sb - - pins 60-65 - - functions sdio, gpio - -group rgmii - - pins 42-53 - - functions mii, gpio - -group pcie1 - - pins 39 - - functions pcie, gpio - -group pcie1_clkreq - - pins 40 - - functions pcie, gpio - -group pcie1_wakeup - - pins 41 - - functions pcie, gpio - -group smi - - pins 54-55 - - functions smi, gpio - -group ptp - - pins 56 - - functions ptp, gpio - -group ptp_clk - - pin 57 - - functions ptp, mii - -group ptp_trig - - pin 58 - - functions ptp, mii - -group mii_col - - pin 59 - - functions mii, mii_err - -GPIO subnode: - -Please refer to gpio.txt in this directory for details of gpio-ranges property -and the common GPIO bindings used by client devices. - -Required properties for gpio driver under the gpio subnode: -- interrupts: List of interrupt specifier for the controllers interrupt. -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be 2. The first cell is the GPIO number and the - second cell specifies GPIO flags, as defined in - . Only the GPIO_ACTIVE_HIGH and - GPIO_ACTIVE_LOW flags are supported. -- gpio-ranges: Range of pins managed by the GPIO controller. - -Xtal Clock bindings for Marvell Armada 37xx SoCs ------------------------------------------------- - -see Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt - - -Example: -pinctrl_sb: pinctrl-sb@18800 { - compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; - reg = <0x18800 0x100>, <0x18C00 0x20>; - gpio { - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_sb 0 0 29>; - gpio-controller; - interrupts = - , - , - , - , - ; - }; - - rgmii_pins: mii-pins { - groups = "rgmii"; - function = "mii"; - }; - -}; -- 2.51.0