From: ValdikSS Device ID comparison in igc_is_device_id_i226 is performed before the ID is set, resulting in always failing check on init. Before the patch: * L1.2 is not disabled on init * L1.2 is properly disabled after suspend-resume cycle With the patch: * L1.2 is properly disabled both on init and after suspend-resume How to test: Connect to the 1G link with 300+ mbit/s Internet speed, and run the download speed test, such as: curl -o /dev/null http://speedtest.selectel.ru/1GB Without L1.2 disabled, the speed would be no more than ~200 mbit/s. With L1.2 disabled, the speed would reach 1 gbit/s. Note: it's required that the latency between your host and the remote be around 3-5 ms, the test inside LAN (<1 ms latency) won't trigger the issue. Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com Fixes: 0325143b59c6 ("igc: disable L1.2 PCI-E link substate to avoid performance issue") Signed-off-by: ValdikSS Reviewed-by: Vitaly Lifshits Reviewed-by: Paul Menzel Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/igc/igc_main.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c index 458e5eaa92e5..e79b14d50b24 100644 --- a/drivers/net/ethernet/intel/igc/igc_main.c +++ b/drivers/net/ethernet/intel/igc/igc_main.c @@ -7149,6 +7149,13 @@ static int igc_probe(struct pci_dev *pdev, adapter->port_num = hw->bus.func; adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); + /* PCI config space info */ + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->revision_id = pdev->revision; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_device_id = pdev->subsystem_device; + /* Disable ASPM L1.2 on I226 devices to avoid packet loss */ if (igc_is_device_id_i226(hw)) pci_disable_link_state(pdev, PCIE_LINK_STATE_L1_2); @@ -7175,13 +7182,6 @@ static int igc_probe(struct pci_dev *pdev, netdev->mem_start = pci_resource_start(pdev, 0); netdev->mem_end = pci_resource_end(pdev, 0); - /* PCI config space info */ - hw->vendor_id = pdev->vendor; - hw->device_id = pdev->device; - hw->revision_id = pdev->revision; - hw->subsystem_vendor_id = pdev->subsystem_vendor; - hw->subsystem_device_id = pdev->subsystem_device; - /* Copy the default MAC and PHY function pointers */ memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops)); memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops)); -- 2.47.1