Set CORECTL_ASYNCGPIO on chipcommon rev 21 and later, as Broadcom's driver does at attach, so that GPIO interrupts are generated without the backplane clock. Signed-off-by: Alessio Ferri --- drivers/bcma/driver_chipcommon.c | 3 +++ include/linux/bcma/bcma_driver_chipcommon.h | 1 + 2 files changed, 4 insertions(+) diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c index fd91a39f0..f5e1b5415 100644 --- a/drivers/bcma/driver_chipcommon.c +++ b/drivers/bcma/driver_chipcommon.c @@ -227,6 +227,9 @@ void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) ((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) | (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT))); } + + if (cc->core->id.rev >= 21) + bcma_cc_set32(cc, BCMA_CC_CORECTL, BCMA_CC_CORECTL_ASYNCGPIO); cc->ticks_per_ms = bcma_chipco_watchdog_ticks_per_ms(cc); cc->setup_done = true; diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 525155658..c7d69d583 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -54,6 +54,7 @@ #define BCMA_CC_CORECTL 0x0008 #define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ #define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +#define BCMA_CC_CORECTL_ASYNCGPIO 0x00000004 /* GPIO IRQs without backplane clock */ #define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */ #define BCMA_CC_BIST 0x000C #define BCMA_CC_OTPS 0x0010 /* OTP status */ -- 2.34.1