Test configuring input-xfrm and hash fields with all the limitations. Tested on mlx5 (CX6): # ./ksft-net-drv/drivers/net/hw/rss_api.py TAP version 13 1..10 ok 1 rss_api.test_rxfh_nl_set_fail ok 2 rss_api.test_rxfh_nl_set_indir ok 3 rss_api.test_rxfh_nl_set_indir_ctx ok 4 rss_api.test_rxfh_indir_ntf ok 5 rss_api.test_rxfh_indir_ctx_ntf ok 6 rss_api.test_rxfh_nl_set_key ok 7 rss_api.test_rxfh_fields ok 8 rss_api.test_rxfh_fields_set ok 9 rss_api.test_rxfh_fields_set_xfrm ok 10 rss_api.test_rxfh_fields_ntf # Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Jakub Kicinski --- v3: - adjust after input_xfrm became a set v2: - make defer() cleanup more intelligent WRT ordering --- .../selftests/drivers/net/hw/rss_api.py | 143 ++++++++++++++++++ 1 file changed, 143 insertions(+) diff --git a/tools/testing/selftests/drivers/net/hw/rss_api.py b/tools/testing/selftests/drivers/net/hw/rss_api.py index 6d48799a423c..424743bb583b 100755 --- a/tools/testing/selftests/drivers/net/hw/rss_api.py +++ b/tools/testing/selftests/drivers/net/hw/rss_api.py @@ -247,6 +247,149 @@ from lib.py import NetDrvEnv comment="Config for " + fl_type) +def test_rxfh_fields_set(cfg): + """ Test configuring Rx Flow Hash over Netlink. """ + + flow_types = ["tcp4", "tcp6", "udp4", "udp6"] + + # Collect current settings + cfg_old = cfg.ethnl.rss_get({"header": {"dev-index": cfg.ifindex}}) + # symmetric hashing is config-order-sensitive make sure we leave + # symmetric mode, or make the flow-hash sym-compatible first + changes = [{"flow-hash": cfg_old["flow-hash"],}, + {"input-xfrm": cfg_old.get("input-xfrm", {}),}] + if cfg_old.get("input-xfrm"): + changes = list(reversed(changes)) + for old in changes: + defer(cfg.ethnl.rss_set, {"header": {"dev-index": cfg.ifindex},} | old) + + # symmetric hashing prevents some of the configs below + if cfg_old.get("input-xfrm"): + cfg.ethnl.rss_set({"header": {"dev-index": cfg.ifindex}, + "input-xfrm": {}}) + + for fl_type in flow_types: + cur = _ethtool_get_cfg(cfg, fl_type) + if cur == "sdfn": + change_nl = {"ip-src", "ip-dst"} + change_ic = "sd" + else: + change_nl = {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"} + change_ic = "sdfn" + + cfg.ethnl.rss_set({ + "header": {"dev-index": cfg.ifindex}, + "flow-hash": {fl_type: change_nl} + }) + reset = defer(ethtool, f"--disable-netlink -N {cfg.ifname} " + f"rx-flow-hash {fl_type} {cur}") + + cfg_nl = cfg.ethnl.rss_get({"header": {"dev-index": cfg.ifindex}}) + ksft_eq(change_nl, cfg_nl["flow-hash"][fl_type], + comment=f"Config for {fl_type} over Netlink") + cfg_ic = _ethtool_get_cfg(cfg, fl_type) + ksft_eq(change_ic, cfg_ic, + comment=f"Config for {fl_type} over IOCTL") + + reset.exec() + cfg_nl = cfg.ethnl.rss_get({"header": {"dev-index": cfg.ifindex}}) + ksft_eq(cfg_old["flow-hash"][fl_type], cfg_nl["flow-hash"][fl_type], + comment=f"Un-config for {fl_type} over Netlink") + cfg_ic = _ethtool_get_cfg(cfg, fl_type) + ksft_eq(cur, cfg_ic, comment=f"Un-config for {fl_type} over IOCTL") + + # Try to set multiple at once, the defer was already installed at the start + change = {"ip-src"} + if change == cfg_old["flow-hash"]["tcp4"]: + change = {"ip-dst"} + cfg.ethnl.rss_set({ + "header": {"dev-index": cfg.ifindex}, + "flow-hash": {x: change for x in flow_types} + }) + + cfg_nl = cfg.ethnl.rss_get({"header": {"dev-index": cfg.ifindex}}) + for fl_type in flow_types: + ksft_eq(change, cfg_nl["flow-hash"][fl_type], + comment=f"multi-config for {fl_type} over Netlink") + + +def test_rxfh_fields_set_xfrm(cfg): + """ Test changing Rx Flow Hash vs xfrm_input at once. """ + + def set_rss(cfg, xfrm, fh): + cfg.ethnl.rss_set({"header": {"dev-index": cfg.ifindex}, + "input-xfrm": xfrm, "flow-hash": fh}) + + # Install the reset handler + cfg_old = cfg.ethnl.rss_get({"header": {"dev-index": cfg.ifindex}}) + # symmetric hashing is config-order-sensitive make sure we leave + # symmetric mode, or make the flow-hash sym-compatible first + changes = [{"flow-hash": cfg_old["flow-hash"],}, + {"input-xfrm": cfg_old.get("input-xfrm", {}),}] + if cfg_old.get("input-xfrm"): + changes = list(reversed(changes)) + for old in changes: + defer(cfg.ethnl.rss_set, {"header": {"dev-index": cfg.ifindex},} | old) + + # Make sure we start with input-xfrm off, and tcp4 config non-sym + set_rss(cfg, {}, {}) + set_rss(cfg, {}, {"tcp4": {"ip-src"}}) + + # Setting sym and fixing tcp4 config not expected to pass right now + with ksft_raises(NlError): + set_rss(cfg, {"sym-xor"}, {"tcp4": {"ip-src", "ip-dst"}}) + # One at a time should work, hopefully + set_rss(cfg, 0, {"tcp4": {"ip-src", "ip-dst"}}) + no_support = False + try: + set_rss(cfg, {"sym-xor"}, {}) + except NlError: + try: + set_rss(cfg, {"sym-or-xor"}, {}) + except NlError: + no_support = True + if no_support: + raise KsftSkipEx("no input-xfrm supported") + # Disabling two at once should not work either without kernel changes + with ksft_raises(NlError): + set_rss(cfg, {}, {"tcp4": {"ip-src"}}) + + +def test_rxfh_fields_ntf(cfg): + """ Test Rx Flow Hash notifications. """ + + cur = _ethtool_get_cfg(cfg, "tcp4") + if cur == "sdfn": + change = {"ip-src", "ip-dst"} + else: + change = {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"} + + ethnl = EthtoolFamily() + ethnl.ntf_subscribe("monitor") + + ethnl.rss_set({ + "header": {"dev-index": cfg.ifindex}, + "flow-hash": {"tcp4": change} + }) + reset = defer(ethtool, + f"--disable-netlink -N {cfg.ifname} rx-flow-hash tcp4 {cur}") + + ntf = next(ethnl.poll_ntf(duration=0.2), None) + if ntf is None: + raise KsftFailEx("No notification received after IOCTL change") + ksft_eq(ntf["name"], "rss-ntf") + ksft_eq(ntf["msg"]["flow-hash"]["tcp4"], change) + ksft_eq(next(ethnl.poll_ntf(duration=0.01), None), None) + + reset.exec() + ntf = next(ethnl.poll_ntf(duration=0.2), None) + if ntf is None: + raise KsftFailEx("No notification received after Netlink change") + ksft_eq(ntf["name"], "rss-ntf") + ksft_ne(ntf["msg"]["flow-hash"]["tcp4"], change) + ksft_eq(next(ethnl.poll_ntf(duration=0.01), None), None) + + def main() -> None: """ Ksft boiler plate main """ -- 2.50.1