Refactor r8156_init into four functions: - r8156_init() for RTL_VER_10/11 - r8156b_init() for RTL_VER_12/13/15 - r8157_init() for RTL_VER_16 - r8159_init() for RTL_VER_17 Signed-off-by: Chih Kai Hsu --- drivers/net/usb/r8152.c | 424 ++++++++++++++++++++++++++++++++-------- 1 file changed, 346 insertions(+), 78 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 57d04af6368c3..0a06c947e381a 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -78,6 +78,7 @@ #define PLA_EEE_TXTWSYS_2P5G 0xe058 #define PLA_EEEP_CR 0xe080 #define PLA_MAC_PWR_CTRL 0xe0c0 +#define PLA_RMT_WAKE 0xe0c8 #define PLA_MAC_PWR_CTRL2 0xe0ca #define PLA_MAC_PWR_CTRL3 0xe0cc #define PLA_MAC_PWR_CTRL4 0xe0ce @@ -371,6 +372,9 @@ #define MCU_CLK_RATIO_MASK 0x0f0f0f0f #define ALDPS_SPDWN_RATIO 0x0f87 +/* PLA_RMT_WAKE */ +#define RMT_WAKE_EN BIT(0) + /* PLA_MAC_PWR_CTRL2 */ #define EEE_SPDWN_RATIO 0x8007 #define MAC_CLK_SPDWN_EN BIT(15) @@ -417,6 +421,7 @@ /* PLA_INDICATE_FALG */ #define UPCOMING_RUNTIME_D3 BIT(0) +#define PREBOOT_OPTION BIT(1) /* PLA_MACDBG_PRE and PLA_MACDBG_POST */ #define DEBUG_OE BIT(0) @@ -542,6 +547,7 @@ #define RX_AGG_DISABLE 0x0010 #define RX_ZERO_EN 0x0080 #define RX_DESC_16B 0x0400 +#define RX_END_TRANSFER_EN BIT(11) /* USB_U2P3_CTRL */ #define U2P3_ENABLE 0x0001 @@ -8358,19 +8364,97 @@ static void r8157_hw_phy_cfg(struct r8152 *tp) set_bit(PHY_RESET, &tp->flags); } -static int r8159_wait_backup_restore(struct r8152 *tp) +static void r8156_init(struct r8152 *tp) { - u32 ocp_data; + u16 data; + int i; - ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); - if (!(ocp_data & PCUT_STATUS)) - return 0; + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + return; - return poll_timeout_us(ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL), - ocp_data & BACKUP_RESTRORE, 200, 20000, false); + ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_ECM_OP, EN_ALL_SPEED); + + ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0); + + ocp_word_set_bits(tp, MCU_TYPE_USB, USB_ECM_OPTION, BYPASS_MAC_RESET); + + r8153b_u1u2en(tp, false); + + for (i = 0; i < 500; i++) { + if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & + AUTOLOAD_DONE) + break; + + msleep(20); + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + return; + } + + data = r8153_phy_status(tp, 0); + if (data == PHY_STAT_EXT_INIT) + ocp_reg_clr_bits(tp, 0xa468, BIT(3) | BIT(1)); + + r8152_mdio_test_and_clr_bit(tp, MII_BMCR, BMCR_PDOWN); + + data = r8153_phy_status(tp, PHY_STAT_LAN_ON); + + r8153_u2p3en(tp, false); + + /* MSC timer = 0xfff * 8ms = 32760 ms */ + ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); + + /* U1/U2/L1 idle timer. 500 us */ + ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); + + r8153b_power_cut_en(tp, false); + r8156_ups_en(tp, false); + r8153_queue_wake(tp, false); + rtl_runtime_suspend_enable(tp, false); + + ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG, PREBOOT_OPTION); + + ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_RMT_WAKE, RMT_WAKE_EN); + + if (tp->udev->speed >= USB_SPEED_SUPER) + r8153b_u1u2en(tp, true); + + usb_enable_lpm(tp->udev); + + r8156_mac_clk_spd(tp, true); + + ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, + PLA_MCU_SPDWN_EN); + + if (rtl8152_get_speed(tp) & LINK_STATUS) + ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, + CUR_LINK_OK | POLL_LINK_CHG); + else + ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, CUR_LINK_OK, + POLL_LINK_CHG); + + set_bit(GREEN_ETHERNET, &tp->flags); + + ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, + RX_AGG_DISABLE | RX_ZERO_EN); + + ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ACT_ODMA); + + r8156_mdio_force_mode(tp); + rtl_tally_reset(tp); + + tp->coalesce = 15000; /* 15 us */ } -static void r8156_init(struct r8152 *tp) +static void r8156b_u2phy_backup(struct r8152 *tp) +{ + ocp_write_word(tp, MCU_TYPE_USB, 0xd3ce, 0x181b); + ocp_write_dword(tp, MCU_TYPE_USB, 0xd3d0, 0x616ccd99); + ocp_write_dword(tp, MCU_TYPE_USB, 0xd3d4, 0x08fc8101); + ocp_write_dword(tp, MCU_TYPE_USB, 0xd3d8, 0x159b1100); + ocp_write_word(tp, MCU_TYPE_USB, 0xd3dc, 0x0a00); +} + +static void r8156b_init(struct r8152 *tp) { u32 ocp_data; u16 data; @@ -8379,28 +8463,19 @@ static void r8156_init(struct r8152 *tp) if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) return; - if (tp->version == RTL_VER_16 || tp->version == RTL_VER_17) { - ocp_byte_set_bits(tp, MCU_TYPE_USB, 0xcffe, BIT(3)); - ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xd3ca, BIT(0)); - } - ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_ECM_OP, EN_ALL_SPEED); - if (tp->version < RTL_VER_16) - ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0); + ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0); ocp_word_set_bits(tp, MCU_TYPE_USB, USB_ECM_OPTION, BYPASS_MAC_RESET); - if (tp->version >= RTL_VER_12 && tp->version <= RTL_VER_15) - ocp_word_set_bits(tp, MCU_TYPE_USB, USB_U2P3_CTRL, RX_DETECT8); + ocp_word_set_bits(tp, MCU_TYPE_USB, USB_U2P3_CTRL, RX_DETECT8); r8153b_u1u2en(tp, false); switch (tp->version) { case RTL_VER_13: case RTL_VER_15: - case RTL_VER_16: - case RTL_VER_17: r8156b_wait_loading_flash(tp); break; default: @@ -8417,31 +8492,20 @@ static void r8156_init(struct r8152 *tp) return; } - if (tp->version == RTL_VER_17 && r8159_wait_backup_restore(tp)) { - rtl_set_inaccessible(tp); - dev_err(&tp->intf->dev, "init failed, backup-restore timed out\n"); - return; - } - data = r8153_phy_status(tp, 0); if (data == PHY_STAT_EXT_INIT) { ocp_reg_clr_bits(tp, 0xa468, BIT(3) | BIT(1)); - if (tp->version >= RTL_VER_12) - ocp_reg_clr_bits(tp, 0xa466, BIT(0)); + ocp_reg_clr_bits(tp, 0xa466, BIT(0)); } - data = r8152_mdio_read(tp, MII_BMCR); - if (data & BMCR_PDOWN) { - data &= ~BMCR_PDOWN; - r8152_mdio_write(tp, MII_BMCR, data); - } + r8152_mdio_test_and_clr_bit(tp, MII_BMCR, BMCR_PDOWN); data = r8153_phy_status(tp, PHY_STAT_LAN_ON); - if (tp->version >= RTL_VER_16) - r8157_u2p3en(tp, false); - else - r8153_u2p3en(tp, false); + r8153_u2p3en(tp, false); + + /* Disable Auto Speed up */ + ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_FW_CTRL, AUTO_SPEEDUP); /* MSC timer = 0xfff * 8ms = 32760 ms */ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); @@ -8449,73 +8513,277 @@ static void r8156_init(struct r8152 *tp) /* U1/U2/L1 idle timer. 500 us */ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); - if (tp->version >= RTL_VER_16) - r8157_power_cut_en(tp, false); - else - r8153b_power_cut_en(tp, false); + r8156b_u2phy_backup(tp); + r8153b_power_cut_en(tp, false); r8156_ups_en(tp, false); r8153_queue_wake(tp, false); rtl_runtime_suspend_enable(tp, false); + ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG, PREBOOT_OPTION); + + ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_RMT_WAKE, RMT_WAKE_EN); + if (tp->udev->speed >= USB_SPEED_SUPER) r8153b_u1u2en(tp, true); usb_enable_lpm(tp->udev); - if (tp->version >= RTL_VER_12 && tp->version <= RTL_VER_15) { - ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_RCR, SLOT_EN); + ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_RCR, SLOT_EN); - ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_CPCR, FLOW_CTRL_EN); + ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_CPCR, FLOW_CTRL_EN); - /* enable fc timer and set timer to 600 ms. */ - ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER, CTRL_TIMER_EN | (600 / 8)); + /* enable fc timer and set timer to 600 ms. */ + ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER, + CTRL_TIMER_EN | (600 / 8)); - ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL); - if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & DACK_DET_EN)) - ocp_data |= FLOW_CTRL_PATCH_2; - ocp_data &= ~AUTO_SPEEDUP; - ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data); + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL); + if (!(ocp_data & DACK_DET_EN)) + ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_CTRL, + FLOW_CTRL_PATCH_2); - ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_TASK, FC_PATCH_TASK); - } + ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_TASK, FC_PATCH_TASK); r8156_mac_clk_spd(tp, true); - if (tp->version < RTL_VER_16) - ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, PLA_MCU_SPDWN_EN); + ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, + PLA_MCU_SPDWN_EN); - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS); if (rtl8152_get_speed(tp) & LINK_STATUS) - ocp_data |= CUR_LINK_OK; + ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, + CUR_LINK_OK | POLL_LINK_CHG); else - ocp_data &= ~CUR_LINK_OK; - ocp_data |= POLL_LINK_CHG; - ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data); + ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, + CUR_LINK_OK, POLL_LINK_CHG); set_bit(GREEN_ETHERNET, &tp->flags); - /* RX aggregation / 16 bytes RX descriptor - * BIT(11) is specific to RTL8159, with unknown meaning - */ - if (tp->version == RTL_VER_17) - ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, - RX_AGG_DISABLE | RX_DESC_16B | BIT(11)); - else if (tp->version == RTL_VER_16) - ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, RX_AGG_DISABLE | RX_DESC_16B); + ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, + RX_AGG_DISABLE | RX_ZERO_EN); + + r8156_mdio_force_mode(tp); + rtl_tally_reset(tp); + + tp->coalesce = 15000; /* 15 us */ +} + +static void r8157_init(struct r8152 *tp) +{ + u16 data; + int i; + + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + return; + + /* Enable SW reset */ + ocp_byte_set_bits(tp, MCU_TYPE_USB, 0xcffe, BIT(3)); + ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xd3ca, BIT(0)); + + ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_ECM_OP, EN_ALL_SPEED); + + ocp_word_set_bits(tp, MCU_TYPE_USB, USB_ECM_OPTION, BYPASS_MAC_RESET); + + r8153b_u1u2en(tp, false); + + for (i = 0; i < 500; i++) { + if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & + AUTOLOAD_DONE) + break; + + msleep(20); + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + return; + } + + r8156b_wait_loading_flash(tp); + + data = r8153_phy_status(tp, 0); + if (data == PHY_STAT_EXT_INIT) { + ocp_reg_clr_bits(tp, 0xa468, BIT(3) | BIT(1)); + ocp_reg_clr_bits(tp, 0xa466, BIT(0)); + } + + r8152_mdio_test_and_clr_bit(tp, MII_BMCR, BMCR_PDOWN); + + data = r8153_phy_status(tp, PHY_STAT_LAN_ON); + + r8157_u2p3en(tp, false); + + /* Disable Interrupt Mitigation */ + ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xcf04, + BIT(0) | BIT(1) | BIT(2) | BIT(7)); + + /* Disable Auto Speed up */ + ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_FW_CTRL, AUTO_SPEEDUP); + + /* MSC timer = 0xfff * 8ms = 32760 ms */ + ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); + + /* U1/U2/L1 idle timer. 500 us */ + ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); + + r8157_power_cut_en(tp, false); + r8156_ups_en(tp, false); + r8153_queue_wake(tp, false); + rtl_runtime_suspend_enable(tp, false); + + ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG, PREBOOT_OPTION); + + ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_RMT_WAKE, RMT_WAKE_EN); + + /* Clear Warm RST / Bus RST event flag */ + ocp_word_clr_bits(tp, MCU_TYPE_USB, 0xcd06, BIT(11)); + + if (tp->udev->speed >= USB_SPEED_SUPER) + r8153b_u1u2en(tp, true); + + usb_enable_lpm(tp->udev); + + r8156_mac_clk_spd(tp, true); + + if (rtl8152_get_speed(tp) & LINK_STATUS) + ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, + CUR_LINK_OK | POLL_LINK_CHG); else - ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, RX_AGG_DISABLE | RX_ZERO_EN); + ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, + CUR_LINK_OK, POLL_LINK_CHG); - if (tp->version < RTL_VER_12) - ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ACT_ODMA); + set_bit(GREEN_ETHERNET, &tp->flags); - if (tp->version >= RTL_VER_16) { - /* Disable Rx Zero Len */ - rtl_bmu_clr_bits(tp, 0x2300, BIT(3)); - /* TX descriptor Signature */ - ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xd4ae, BIT(1)); + /* RX aggregation / 16 bytes RX descriptor / Bulk In End transfer */ + ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, + RX_AGG_DISABLE | RX_DESC_16B | RX_END_TRANSFER_EN); + + /* Disable Rx Zero Len */ + rtl_bmu_clr_bits(tp, 0x2300, BIT(3)); + + /* TX descriptor Signature */ + ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xd4ae, BIT(1)); + + r8156_mdio_force_mode(tp); + rtl_tally_reset(tp); + + tp->coalesce = 15000; /* 15 us */ +} + +static int r8159_wait_backup_restore(struct r8152 *tp) +{ + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); + if (!(ocp_data & PCUT_STATUS)) + return 0; + + return poll_timeout_us(ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL), + ocp_data & BACKUP_RESTRORE, 200, 20000, false); +} + +static void r8159_init(struct r8152 *tp) +{ + u16 data; + int i; + + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + return; + + /* Enable SW reset */ + ocp_byte_set_bits(tp, MCU_TYPE_USB, 0xcffe, BIT(3)); + ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xd3ca, BIT(0)); + + ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_ECM_OP, EN_ALL_SPEED); + + ocp_word_set_bits(tp, MCU_TYPE_USB, USB_ECM_OPTION, BYPASS_MAC_RESET); + + r8153b_u1u2en(tp, false); + + for (i = 0; i < 500; i++) { + if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & + AUTOLOAD_DONE) + break; + + msleep(20); + if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) + return; } + if (r8159_wait_backup_restore(tp)) { + rtl_set_inaccessible(tp); + dev_err(&tp->intf->dev, + "init failed, backup-restore timed out\n"); + return; + } + + r8156b_wait_loading_flash(tp); + + data = r8153_phy_status(tp, 0); + if (data == PHY_STAT_EXT_INIT) { + ocp_reg_clr_bits(tp, 0xa468, BIT(3) | BIT(1)); + ocp_reg_clr_bits(tp, 0xa466, BIT(0)); + } + + r8152_mdio_test_and_clr_bit(tp, MII_BMCR, BMCR_PDOWN); + + data = r8153_phy_status(tp, PHY_STAT_LAN_ON); + + r8157_u2p3en(tp, false); + + /* Disable Interrupt Mitigation */ + ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xcf04, + BIT(0) | BIT(1) | BIT(2) | BIT(7)); + + /* Disable Auto Speed up */ + ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_FW_CTRL, AUTO_SPEEDUP); + + /* MSC timer = 0xfff * 8ms = 32760 ms */ + ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); + + /* U1/U2/L1 idle timer. 500 us */ + ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); + + r8157_power_cut_en(tp, false); + r8156_ups_en(tp, false); + r8153_queue_wake(tp, false); + rtl_runtime_suspend_enable(tp, false); + + ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG, PREBOOT_OPTION); + + ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_RMT_WAKE, RMT_WAKE_EN); + + /* Clear Warm RST / Bus RST event flag */ + ocp_word_clr_bits(tp, MCU_TYPE_USB, 0xcd06, BIT(11)); + + /* Disable FW u1u2 patch option */ + ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xb9a6, BIT(0)); + + if (tp->udev->speed >= USB_SPEED_SUPER) + r8153b_u1u2en(tp, true); + + usb_enable_lpm(tp->udev); + + r8156_mac_clk_spd(tp, true); + + if (rtl8152_get_speed(tp) & LINK_STATUS) + ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, + CUR_LINK_OK | POLL_LINK_CHG); + else + ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, + CUR_LINK_OK, POLL_LINK_CHG); + + set_bit(GREEN_ETHERNET, &tp->flags); + + /* RX aggregation / 16 bytes RX descriptor / Bulk In End transfer */ + ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, + RX_AGG_DISABLE | RX_DESC_16B | RX_END_TRANSFER_EN); + + /* Disable Rx Zero Len */ + rtl_bmu_clr_bits(tp, 0x2300, BIT(3)); + + /* TX descriptor Signature */ + ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xd4ae, BIT(1)); + + /* Enable u3phy patch backup */ + ocp_write_word(tp, MCU_TYPE_USB, 0xb9a2, 0x0448); + r8156_mdio_force_mode(tp); rtl_tally_reset(tp); @@ -9846,7 +10114,7 @@ static int rtl_ops_init(struct r8152 *tp) tp->eee_en = true; tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; tp->eee_adv2 = MDIO_EEE_2_5GT; - ops->init = r8156_init; + ops->init = r8156b_init; ops->enable = rtl8156_enable; ops->disable = rtl8153_disable; ops->up = rtl8156_up; @@ -9885,7 +10153,7 @@ static int rtl_ops_init(struct r8152 *tp) tp->eee_en = true; tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX; tp->eee_adv2 = MDIO_EEE_2_5GT | MDIO_EEE_5GT; - ops->init = r8156_init; + ops->init = r8157_init; ops->enable = rtl8156_enable; ops->disable = rtl8153_disable; ops->up = rtl8156_up; @@ -9907,7 +10175,7 @@ static int rtl_ops_init(struct r8152 *tp) tp->eee_en = true; tp->eee_adv = MDIO_EEE_100TX | MDIO_EEE_1000T | MDIO_EEE_10GT; tp->eee_adv2 = MDIO_EEE_2_5GT | MDIO_EEE_5GT; - ops->init = r8156_init; + ops->init = r8159_init; ops->enable = rtl8156_enable; ops->disable = rtl8153_disable; ops->up = rtl8156_up; -- 2.34.1