WRT3200ACM and WRT32x routers always report a fixed US regulatory domain from the mwifiex ROM, which conflicts with the platform regulatory configuration on units sold outside the US market. For example: - phy0 mwlwifi 5 GHz, hard-coded region 98 EU mapped to FR - phy1 mwlwifi 2.4 GHz, hard-coded region 98 EU mapped to FR - phy2 mwifiex 2.4 and 5 GHz, hard-coded region US When the system boots, it detects a conflict between the user selected region and the radios, e.g. BG FR US, and applies extreme restrictions, preventing use of 5 GHz and DFS channels. This also affects phy0. Ignore the incorrect regulatory hint in the ROM of these devices, so userspace can set the correct platform regulatory domain. These radios are locked to the hard-coded configuration for which they are certified, so the only impact is that the region conflict is avoided and the 5 GHz radios can be used. The change affects only WRT3200ACM and WRT32x routers, and helps overcome the incorrect behaviour of proprietary radio firmware. [1] https://github.com/kaloz/mwlwifi/issues/173#issuecomment-307879699 [2] https://github.com/openwrt/openwrt/issues/9956 Tested-on: WRT3200ACM, OpenWrt Cc: stable@vger.kernel.org Signed-off-by: Georgi Valkov --- The dts files on Linux use only board names. A patch in OpenWrt adds device names which are easier to understand. If we want to be compatible with both, we can either use board names or accept this patch in Linux: https://github.com/openwrt/openwrt/blob/main/target/linux/mvebu/patches-6.18/ 311-adjust-compatible-for-linksys.patch I implemented and tested a better approach with no board specific code: - check for a device-tree flag in mwifiex_register_cfg80211in() !of_property_read_bool(of_root, "marvell,ignore-regulatory-hint") - add this flag to the root device tree of each affected board Currently this affects only armada-385-linksys-rango.dts, because Linux has no dts for venom. OpenWrt will take care of that. This approach is more flexible and scalable, because the flag can also be used in other drivers, e.g. mwlwifi (not part of Linux). Any help is welcome! v2: Replace the compatible device names, which are currently only available on OpenWrt with board names which are available on both Linux and OpenWrt. drivers/net/wireless/marvell/mwifiex/cfg80211.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c index abc703441c5d..ff6a22237a0f 100644 --- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c +++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c @@ -4899,7 +4899,15 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter) country_code = mwifiex_11d_code_2_region( adapter->region_code); + + /* WRT3200ACM/WRT32x ROM always reports US, which + * conflicts with routers sold outside the US. + * Ignore this hint so userspace can + * set the correct regulatory domain. + */ if (country_code && + !of_machine_is_compatible("linksys,rango") && + !of_machine_is_compatible("linksys,venom") && regulatory_hint(wiphy, country_code)) mwifiex_dbg(priv->adapter, ERROR, "regulatory_hint() failed\n"); -- 2.55.0