From: Kamil Horák (2N) Reset the bit 12 in PHY's LRE Control register upon initialization. According to the datasheet, this bit must be written to zero after every device reset. Signed-off-by: Kamil Horák (2N) --- drivers/net/phy/broadcom.c | 23 +++++++++++++++++++---- include/linux/brcmphy.h | 1 + 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 7d3b85a07b8c..9d38aa7f3b45 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -662,7 +662,7 @@ static int bcm5481x_read_abilities(struct phy_device *phydev) { struct device_node *np = phydev->mdio.dev.of_node; struct bcm54xx_phy_priv *priv = phydev->priv; - int i, val, err; + int i, val, err, aneg; for (i = 0; i < ARRAY_SIZE(bcm54811_linkmodes); i++) linkmode_clear_bit(bcm54811_linkmodes[i], phydev->supported); @@ -683,9 +683,17 @@ static int bcm5481x_read_abilities(struct phy_device *phydev) if (val < 0) return val; + /* BCM54811 is not capable of LDS but the corresponding bit + * in LRESR is set to 1 and marked "Ignore" in the datasheet. + * So we must read the bcm54811 as unable to auto-negotiate + * in BroadR-Reach mode. + */ + aneg = (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811) ? + (val & LRESR_LDSABILITY) : 0; + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported, - val & LRESR_LDSABILITY); + aneg); linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT, phydev->supported, val & LRESR_100_1PAIR); @@ -742,8 +750,15 @@ static int bcm54811_config_aneg(struct phy_device *phydev) /* Aneg firstly. */ if (priv->brr_mode) { - /* BCM54811 is only capable of autonegotiation in IEEE mode */ - phydev->autoneg = 0; + /* BCM54811 is only capable of autonegotiation in IEEE mode. + * In BroadR-Reach mode, disable the Long Distance Signaling, + * the BRR mode autoneg as supported in other Broadcom PHYs. + * This bit is marked as "Reserved" and "Default 1, must be + * written to 0 after every device reset" in the datasheet. + */ + ret = phy_modify(phydev, MII_BCM54XX_LRECR, LRECR_LDSEN, 0); + if (ret < 0) + return ret; ret = bcm_config_lre_aneg(phydev, false); } else { ret = genphy_config_aneg(phydev); diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 15c35655f482..115a964f3006 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -137,6 +137,7 @@ #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RSVD 0x0060 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN 0x0080 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100 #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 -- 2.39.5