5.10-stable review patch. If anyone has any objections, please let me know. ------------------ From: Rosen Penev [ Upstream commit 7a90520e8c9a8f48fe6f3e741cf34d8c2b6dbc61 ] The ahci-mvebu driver and libahci_platform request three supplies on SATA controller and port nodes: - ahci-supply (controller power) - phy-supply (PHY power) - target-supply (disk power per port) Without them the regulator core prints notices at boot, e.g.: supply ahci not found, using dummy regulator supply phy not found, using dummy regulator supply target not found, using dummy regulator The SATA controller and PHY inside the Armada 388 SoC are powered by the 3.3V I/O rail; the four disk bays are powered by the 5V HDD rail. Wire the existing fixed regulators accordingly. Fixes: ced8025b569e ("ARM: dts: armada388-helios4") Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin --- arch/arm/boot/dts/armada-388-helios4.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts index a018de69da83a..1ba824f6fb206 100644 --- a/arch/arm/boot/dts/armada-388-helios4.dts +++ b/arch/arm/boot/dts/armada-388-helios4.dts @@ -222,13 +222,17 @@ sata@a8000 { status = "okay"; #address-cells = <1>; #size-cells = <0>; + ahci-supply = <®_3p3v>; + phy-supply = <®_3p3v>; sata0: sata-port@0 { reg = <0>; + target-supply = <®_5p0v_hdd>; }; sata1: sata-port@1 { reg = <1>; + target-supply = <®_5p0v_hdd>; }; }; @@ -236,13 +240,17 @@ sata@e0000 { status = "okay"; #address-cells = <1>; #size-cells = <0>; + ahci-supply = <®_3p3v>; + phy-supply = <®_3p3v>; sata2: sata-port@0 { reg = <0>; + target-supply = <®_5p0v_hdd>; }; sata3: sata-port@1 { reg = <1>; + target-supply = <®_5p0v_hdd>; }; }; -- 2.53.0