The upstream dts lacks the lantiq,{rx/tx}-burst-length property. Other issues were also fixed: arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'interrupt-names' is a required property from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml# arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,tx-burst-length' is a required property from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml# arch/mips/boot/dts/lantiq/danube_easy50712.dtb: etop@e180000 (lantiq,etop-xway): 'lantiq,rx-burst-length' is a required property from schema $id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml# Fixes: 14d4e308e0aa ("net: lantiq: configure the burst length in ethernet drivers") Signed-off-by: Aleksander Jan Bajkowski --- arch/mips/boot/dts/lantiq/danube_easy50712.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/mips/boot/dts/lantiq/danube_easy50712.dts b/arch/mips/boot/dts/lantiq/danube_easy50712.dts index 1ce20b7d05cb..d8b3cd69eda3 100644 --- a/arch/mips/boot/dts/lantiq/danube_easy50712.dts +++ b/arch/mips/boot/dts/lantiq/danube_easy50712.dts @@ -87,8 +87,11 @@ etop@e180000 { reg = <0xe180000 0x40000>; interrupt-parent = <&icu0>; interrupts = <73 78>; + interrupt-names = "tx", "rx"; phy-mode = "rmii"; mac-address = [ 00 11 22 33 44 55 ]; + lantiq,rx-burst-length = <4>; + lantiq,tx-burst-length = <4>; }; stp0: stp@e100bb0 { -- 2.47.2