gpy_update_interface() returns early in case the PHY is internal or connected via USXGMII. In this case the gigabit master/slave property as well as MDI/MDI-X status also won't be read which seems wrong. Always read those properties by moving the logic to retrieve them to gpy_read_status(). Fixes: fd8825cd8c6fc ("net: phy: mxl-gpy: Add PHY Auto/MDI/MDI-X set driver for GPY211 chips") Fixes: 311abcdddc00a ("net: phy: add support to get Master-Slave configuration") Suggested-by: "Russell King (Oracle)" Signed-off-by: Daniel Golle --- drivers/net/phy/mxl-gpy.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c index 221b315203d06..2a873f791733a 100644 --- a/drivers/net/phy/mxl-gpy.c +++ b/drivers/net/phy/mxl-gpy.c @@ -578,13 +578,7 @@ static int gpy_update_interface(struct phy_device *phydev) break; } - if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000) { - ret = genphy_read_master_slave(phydev); - if (ret < 0) - return ret; - } - - return gpy_update_mdix(phydev); + return 0; } static int gpy_read_status(struct phy_device *phydev) @@ -639,6 +633,16 @@ static int gpy_read_status(struct phy_device *phydev) ret = gpy_update_interface(phydev); if (ret < 0) return ret; + + if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000) { + ret = genphy_read_master_slave(phydev); + if (ret < 0) + return ret; + } + + ret = gpy_update_mdix(phydev); + if (ret < 0) + return ret; } return 0; -- 2.51.2