The root port of pcie0 has a label, the one of pcie1 has none, so a board cannot attach its PERST# GPIO or a device below it the same way. Add pcie1_port0. Assisted-by: LLM Signed-off-by: Andrei-Alexandru Bleortu --- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index fe1ed240d..2f3bcfa88 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -838,7 +838,7 @@ pcie1: pcie@80000000 { status = "disabled"; - pcie@0 { + pcie1_port0: pcie@0 { device_type = "pci"; reg = <0x0 0x0 0x0 0x0 0x0>; bus-range = <0x01 0xff>; -- 2.47.3