7.3-stable review patch. If anyone has any objections, please let me know. ------------------ From: Hans de Goede [ Upstream commit 844982d3b99340c21dd2125f44e1ad04ace6a38e ] There have been several reports of the sensor not properly powering on, on laptops where an INT3472 handshake GPIO is used. Both with ov08x40 and hi556 sensors. Testing has shown that a delay of 200 ms is necessary in some cases. The handshake GPIO is typically used to signal an extra bridge or other IC with that IC running the full sensor power sequence based on the handshake signal and also possible controlling I2C pass-through. It seems that in some cases that extra IC takes up to 200 ms to before the sensor is fully powered up and ready for I2C communication. With the default handshake signal delay increased to 200 ms the quirk to increase it to 45 ms for the ov08x40 is no longer necessary and is actually undesirable since some ov08x40 setups also need the longer delay, drop it. Fixes: 30359c239ba8 ("platform/x86: int3472: Increase ov08x40 handshake GPIO delay to 45 ms") Closes: https://lore.kernel.org/platform-driver-x86/20260816204247.2844986-1-opensource@inspiredexperts.com/ Reported-by: James Alexander Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2333331 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2333647 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Sakari Ailus Signed-off-by: Sasha Levin --- drivers/platform/x86/intel/int3472/discrete.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c index 9cd4f78875abf..6bc0ab3e8d1f4 100644 --- a/drivers/platform/x86/intel/int3472/discrete.c +++ b/drivers/platform/x86/intel/int3472/discrete.c @@ -15,6 +15,7 @@ #include #include #include +#include #include /* @@ -178,13 +179,6 @@ static const struct int3472_gpio_map int3472_gpio_map[] = { .type_to = INT3472_GPIO_TYPE_RESET, .con_id = "enable", }, - { /* ov08x40's handshake pin needs a 45 ms delay on some HP laptops */ - .hids = (const char * const[]) { "OVTI08F4", NULL }, - .type_from = INT3472_GPIO_TYPE_HANDSHAKE, - .type_to = INT3472_GPIO_TYPE_HANDSHAKE, - .con_id = "dvdd", - .enable_time_us = 45 * USEC_PER_MSEC, - }, { /* Sensors which expect "vana" as con_id for power enable */ .hids = power_enable_hids_vana, .type_from = INT3472_GPIO_TYPE_POWER_ENABLE, @@ -273,8 +267,8 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3 case INT3472_GPIO_TYPE_HANDSHAKE: *con_id = "dvdd"; *gpio_flags = GPIO_ACTIVE_HIGH; - /* Setups using a handshake pin need 25 ms enable delay */ - *enable_time_us = 25 * USEC_PER_MSEC; + /* Powering up the sensor through the handshake pin takes up to 200 ms */ + *enable_time_us = 200 * USEC_PER_MSEC; break; default: *con_id = "unknown"; -- 2.53.0