When user space issues an I2C_RDWR ioctl on an exposed I2C device (/dev/i2c-X) with a zero-length message (msg.len == 0), i2cdev_ioctl_rdwr() allocates the message buffer using memdup_user(), which returns ZERO_SIZE_PTR (0x10) for a length of 0. When su3000_i2c_transfer() subsequently processes the request, it accesses the buffer without checking its length, unconditionally dereferencing msg[j].buf[0] for SU3000_STREAM_CTRL commands. Dereferencing ZERO_SIZE_PTR leads to a general protection fault and KASAN null-ptr-deref report. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:su3000_i2c_transfer+0x1aa/0xfc0 drivers/media/usb/dvb-usb/dw2102.c:740 Call Trace: __i2c_transfer+0x7bf/0x1fe0 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x1cb/0x2d0 drivers/i2c/i2c-core-base.c:2350 i2cdev_ioctl_rdwr+0x460/0x740 drivers/i2c/i2c-dev.c:306 i2cdev_ioctl+0x6a5/0x880 drivers/i2c/i2c-dev.c:467 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x155/0x510 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f Commit d2ffc447cabb ("[media] dw2102: add SU3000 support") specifically introduced the SU3000 support and the unvalidated buffer access in su3000_i2c_transfer(). In addition, similar missing length checks exist across the other transfer callbacks in drivers/media/usb/dvb-usb/dw2102.c dating back to their original introductions, while dw2102_i2c_transfer() was previously fixed in commit 5ae544d94abc ("media: dw2102: Fix null-ptr-deref in dw2102_i2c_transfer()"). Specifically, SU3000_STREAM_CTRL requires msg[j].len >= 1 to read msg[j].buf[0]; DW2102_RC_QUERY requires msg[].len >= 2 to store the 2-byte query response across all callbacks; DW2102_VOLTAGE_CTRL requires msg[].len >= 1 in dw2102_serit_i2c_transfer, dw2102_earda_i2c_transfer, and dw2104_i2c_transfer to read msg[].buf[0], but requires msg[j].len >= 2 in s6x0_i2c_transfer to read msg[j].buf[1]; DW2102_LED_CTRL requires msg[j].len >= 1 in s6x0_i2c_transfer to read msg[j].buf[0]; and default firmware write paths in dw2104_i2c_transfer and s6x0_i2c_transfer require msg[j].len >= 1 to inspect msg[j].buf[0]. Additionally, dw2102_earda_i2c_transfer() suffered from an out-of-bounds read when num == 1 by reading msg[1].len outside the message array in warning logs when validating the transfer buffer size. Fix these issues by validating msg[].len against each command's minimum required size before indexing into or copying to msg[].buf across all dw2102 I2C transfer callbacks, returning -EOPNOTSUPP on failure, and correct the out-of-bounds read in dw2102_earda_i2c_transfer() by referencing msg[0].len. Fixes: d2ffc447cabb ("[media] dw2102: add SU3000 support") Fixes: d2ffc447cabb ("[media] dw2102: add support for Geniatech SU3000 USB DVB-S2 card") Assisted-by: Gemini:gemini-3.8-flash syzbot Reported-by: syzbot+d99f3a288cc7d8ef60fb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d99f3a288cc7d8ef60fb Link: https://syzkaller.appspot.com/ai_job?id=6254b526-6207-4b74-8e04-87bfa788d3aa To: To: "Mauro Carvalho Chehab" To: "Igor M. Liplianin" Cc: --- v2: - Clarified that zero-length memdup_user() returns ZERO_SIZE_PTR and dropped the reference to kmalloc_track_caller(). - Documented the minimum required length for each guarded command across the transfer callbacks. - Described the msg[1].len access in dw2102_earda_i2c_transfer() as an out-of-bounds read when num == 1. - Clarified the history of the fixes, tying Fixes: d2ffc447cabb specifically to su3000_i2c_transfer(). v1: https://lore.kernel.org/all/9dda9080-8d80-4504-95dd-0faef04af12d@mail.kernel.org/T/ --- diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 4fecf2f96..a76bc2887 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -265,12 +265,20 @@ static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, msg[0].len + 2, DW210X_WRITE_MSG); break; case(DW2102_RC_QUERY): + if (msg[0].len < 2) { + num = -EOPNOTSUPP; + break; + } dw210x_op_rw(d->udev, 0xb8, 0, 0, buf6, 2, DW210X_READ_MSG); msg[0].buf[0] = buf6[0]; msg[0].buf[1] = buf6[1]; break; case(DW2102_VOLTAGE_CTRL): + if (msg[0].len < 1) { + num = -EOPNOTSUPP; + break; + } buf6[0] = 0x30; buf6[1] = msg[0].buf[0]; dw210x_op_rw(d->udev, 0xb2, 0, 0, @@ -334,7 +342,7 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms if (2 + msg[0].len > sizeof(obuf)) { warn("i2c wr: len=%d is too big!\n", - msg[1].len); + msg[0].len); ret = -EOPNOTSUPP; goto unlock; } @@ -352,7 +360,7 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms if (2 + msg[0].len > sizeof(obuf)) { warn("i2c wr: len=%d is too big!\n", - msg[1].len); + msg[0].len); ret = -EOPNOTSUPP; goto unlock; } @@ -367,6 +375,10 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms case(DW2102_RC_QUERY): { u8 ibuf[2]; + if (msg[0].len < 2) { + ret = -EOPNOTSUPP; + goto unlock; + } dw210x_op_rw(d->udev, 0xb8, 0, 0, ibuf, 2, DW210X_READ_MSG); memcpy(msg[0].buf, ibuf, 2); @@ -375,6 +387,10 @@ static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg ms case(DW2102_VOLTAGE_CTRL): { u8 obuf[2]; + if (msg[0].len < 1) { + ret = -EOPNOTSUPP; + goto unlock; + } obuf[0] = 0x30; obuf[1] = msg[0].buf[0]; dw210x_op_rw(d->udev, 0xb2, 0, 0, @@ -407,6 +423,10 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i case(DW2102_RC_QUERY): { u8 ibuf[2]; + if (msg[j].len < 2) { + ret = -EOPNOTSUPP; + goto unlock; + } dw210x_op_rw(d->udev, 0xb8, 0, 0, ibuf, 2, DW210X_READ_MSG); memcpy(msg[j].buf, ibuf, 2); @@ -415,6 +435,10 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i case(DW2102_VOLTAGE_CTRL): { u8 obuf[2]; + if (msg[j].len < 1) { + ret = -EOPNOTSUPP; + goto unlock; + } obuf[0] = 0x30; obuf[1] = msg[j].buf[0]; dw210x_op_rw(d->udev, 0xb2, 0, 0, @@ -444,6 +468,9 @@ static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], i DW210X_READ_MSG); memcpy(msg[j].buf, ibuf + 2, msg[j].len); mdelay(10); + } else if (msg[j].len < 1) { + ret = -EOPNOTSUPP; + goto unlock; } else if (((msg[j].buf[0] == 0xb0) && (msg[j].addr == 0x68)) || ((msg[j].buf[0] == 0xf7) && (msg[j].addr == 0x55))) { /* write firmware */ @@ -557,6 +584,10 @@ static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], case(DW2102_RC_QUERY): { u8 ibuf[2]; + if (msg[0].len < 2) { + ret = -EOPNOTSUPP; + goto unlock; + } dw210x_op_rw(d->udev, 0xb8, 0, 0, ibuf, 2, DW210X_READ_MSG); memcpy(msg[0].buf, ibuf, 2); @@ -597,6 +628,10 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], case (DW2102_RC_QUERY): { u8 ibuf[5]; + if (msg[j].len < 2) { + ret = -EOPNOTSUPP; + goto unlock; + } dw210x_op_rw(d->udev, 0xb8, 0, 0, ibuf, 5, DW210X_READ_MSG); memcpy(msg[j].buf, ibuf + 3, 2); @@ -605,6 +640,10 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], case (DW2102_VOLTAGE_CTRL): { u8 obuf[2]; + if (msg[j].len < 2) { + ret = -EOPNOTSUPP; + goto unlock; + } obuf[0] = 1; obuf[1] = msg[j].buf[1];/* off-on */ dw210x_op_rw(d->udev, 0x8a, 0, 0, @@ -618,6 +657,10 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], case (DW2102_LED_CTRL): { u8 obuf[2]; + if (msg[j].len < 1) { + ret = -EOPNOTSUPP; + goto unlock; + } obuf[0] = 5; obuf[1] = msg[j].buf[0]; dw210x_op_rw(d->udev, 0x8a, 0, 0, @@ -647,6 +690,9 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], DW210X_READ_MSG); memcpy(msg[j].buf, ibuf, msg[j].len); break; + } else if (msg[j].len < 1) { + ret = -EOPNOTSUPP; + goto unlock; } else if ((msg[j].buf[0] == 0xb0) && (msg[j].addr == 0x68)) { /* write firmware */ u8 obuf[19]; @@ -737,6 +783,10 @@ static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], while (j < num) { switch (msg[j].addr) { case SU3000_STREAM_CTRL: + if (msg[j].len < 1) { + num = -EOPNOTSUPP; + break; + } state->data[0] = msg[j].buf[0] + 0x36; state->data[1] = 3; state->data[2] = 0; @@ -745,6 +795,10 @@ static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], err("i2c transfer failed."); break; case DW2102_RC_QUERY: + if (msg[j].len < 2) { + num = -EOPNOTSUPP; + break; + } state->data[0] = 0x10; if (dvb_usb_generic_rw(d, state->data, 1, state->data, 2, 0) < 0) base-commit: c03c1a14507dfaf8b856c2608f9ac216021fc222 -- This is an AI-generated patch subject to moderation. Reply with '#syz upstream' to Sign-off the patch as a human author and send it to the upstream kernel mailing lists. Reply with '#syz reject' to reject it ('#syz unreject' to undo). See https://goo.gle/syzbot-ai-patches for information about AI-generated patches. You can comment on the patch as usual, syzbot will try to address the comments and send a new version of the patch if necessary. syzbot engineers can be reached at syzkaller@googlegroups.com.