| Published | Title | Version | Author | Status |
|---|---|---|---|---|
| 2025-12-08 01:27 UTC | net: dsa: mxl-gsw1xx: manually clear RANEG bit | 3 | daniel@makrotopia.org | finished in 51m0s |
| 2025-12-07 21:03 UTC | net: sfp: extend Potron XGSPON quirk to cover additional EEPROM variant | 1 | marcus.hughes@betterinternet.ltd | finished in 51m0s |
| 2025-12-06 22:36 UTC | net: dsa: mxl-gsw1xx: manually clear RANEG bit | 2 | daniel@makrotopia.org | finished in 49m0s |
| 2025-12-05 01:37 UTC | net: mdio: aspeed: add dummy read to avoid read-after-write issue | 1 | jacky_chou@aspeedtech.com | finished in 58m0s |
| 2025-12-05 01:32 UTC | net: dsa: mxl-gsw1xx: manually clear RANEG bit | 1 | daniel@makrotopia.org | finished in 58m0s |
| 2025-12-04 16:40 UTC | net: stmmac: add physical port identification support | 1 | john.madieu.xa@bp.renesas.com | skipped |
| 2025-12-02 23:37 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 1 | daniel@makrotopia.org | finished in 47m0s |
| 2025-12-02 17:27 UTC | net: phy: marvell-88q2xxx: Fix clamped value in mv88q2xxx_hwmon_write | 1 | thorsten.blum@linux.dev | finished in 53m0s |
| 2025-12-02 09:07 UTC | net: phy: RTL8211FVD: Restore disabling of PHY-mode EEE | 1 | ivan.galkin@axis.com | finished in 1h42m0s |
| 2025-12-01 09:42 UTC | net: dsa: yt921x: Add STP/MST support | 4 | mmyangfl@gmail.com | finished in 1h1m0s |
| 2025-12-01 03:23 UTC | Add SQI and SQI+ support for OATC14 10Base-T1S PHYs and Microchip T1S driver | 4 | parthiban.veerasooran@microchip.com | finished in 1h40m0s |
| 2025-11-29 19:53 UTC | support for hwtstamp_get in phy - part 2 | 2 | vadim.fedorenko@linux.dev | finished in 51m0s |
| 2025-11-29 08:22 UTC | net: phy: Introduce PHY ports representation | 21 | maxime.chevallier@bootlin.com | finished in 3h51m0s |
| 2025-11-29 04:21 UTC | net: dsa: yt921x: Set ageing_time_min/ageing_time_max | 1 | mmyangfl@gmail.com | finished in 47m0s |
| 2025-11-28 13:53 UTC | net: mdio: reset PHY before attempting to access ID register | 2 | buday.csaba@prolan.hu | finished in 1h48m0s |
| 2025-11-27 21:12 UTC | support for hwtstamp_get in phy - part 2 | 1 | vadim.fedorenko@linux.dev | finished in 59m0s |
| 2025-11-27 17:17 UTC | net: phy: Introduce PHY ports representation | 20 | maxime.chevallier@bootlin.com | finished in 3h52m0s |
| 2025-11-27 14:01 UTC | ARM/mm/fault: always goto bad_area when handling with page faults of kernel address | 2 | xieyuanbin1@huawei.com | finished in 55m0s |
| 2025-11-27 11:44 UTC | net: phy: aquantia: check for NVMEM deferral | 1 | robimarko@gmail.com | finished in 50m0s |
| 2025-11-27 01:14 UTC | mm: continue using per-VMA lock when retrying page faults after I/O | 1 | 21cnbao@gmail.com | skipped |
| 2025-11-26 10:49 UTC | Add SQI and SQI+ support for OATC14 10Base-T1S PHYs and Microchip T1S driver | 3 | parthiban.veerasooran@microchip.com | finished in 1h48m0s |
| 2025-11-26 10:19 UTC | vfs: Fix might sleep in load_unaligned_zeropad() with rcu read lock held | 1 | xieyuanbin1@huawei.com | finished in 4h26m0s |
| 2025-11-26 09:32 UTC | net: dsa: yt921x: Add STP/MST/HSR/LAG support | 3 | mmyangfl@gmail.com | finished in 52m0s |
| 2025-11-25 11:15 UTC | net: mdio: reset PHY before attempting to access ID register | 1 | buday.csaba@prolan.hu | finished in 1h47m0s |
| 2025-11-25 10:35 UTC | net: pcs: lynx: accept in-band autoneg for 2500base-x | 2 | vladimir.oltean@nxp.com | finished in 51m0s |
| 2025-11-24 18:11 UTC | add hwtstamp_get callback to phy drivers | 5 | vadim.fedorenko@linux.dev | finished in 3h53m0s |
| 2025-11-24 16:32 UTC | Add DWMAC glue driver for Motorcomm YT6801 | 3 | ziyao@disroot.org | skipped |
| 2025-11-24 14:50 UTC | net: mdio: remove redundant fwnode cleanup | 1 | buday.csaba@prolan.hu | finished in 1h47m0s |
| 2025-11-24 07:19 UTC | net: mdio: eliminate kdoc warnings in mdio_device.c and mdio_bus.c | 2 | buday.csaba@prolan.hu | finished in 1h38m0s |
| 2025-11-22 19:33 UTC | XPCS polarity inversion via generic device tree properties | 1 | vladimir.oltean@nxp.com | finished in 49m0s |
| 2025-11-22 13:32 UTC | net: phy: mxl-gpy: add support for MxL86211C | 2 | daniel@makrotopia.org | finished in 49m0s |
| 2025-11-22 12:43 UTC | net: phy: Introduce PHY ports representation | 19 | maxime.chevallier@bootlin.com | finished in 3h51m0s |
| 2025-11-22 11:55 UTC | net: dpaa: fman_memac: complete phylink support with 2500base-x | 1 | vladimir.oltean@nxp.com | finished in 54m0s |
| 2025-11-22 11:34 UTC | net: pcs: lynx: accept in-band autoneg for 2500base-x | 1 | vladimir.oltean@nxp.com | finished in 57m0s |
| 2025-11-22 11:04 UTC | net: phy: dp83867: implement configurability for SGMII in-band auto-negotiation | 1 | vladimir.oltean@nxp.com | finished in 51m0s |
| 2025-11-21 17:02 UTC | net: marvell: modernize RX ring count ethtool callbacks | 1 | leitao@debian.org | finished in 1h1m0s |
| 2025-11-21 16:39 UTC | net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support | 5 | alexander.duyck@gmail.com | finished in 1h10m0s |
| 2025-11-21 11:35 UTC | Add ETHSW support for Renesas RZ/T2H and RZ/N2H SoCs | 1 | prabhakar.csengg@gmail.com | finished in 56m0s |
| 2025-11-21 07:45 UTC | net: mdio: eliminate kdoc warnings in mdio_device.c and mdio_bus.c | 1 | buday.csaba@prolan.hu | finished in 1h39m0s |
| 2025-11-20 20:54 UTC | net: phy: Introduce PHY ports representation | 18 | maxime.chevallier@bootlin.com | finished in 3h57m0s |
| 2025-11-20 17:45 UTC | add hwtstamp_get callback to phy drivers | 4 | vadim.fedorenko@linux.dev | finished in 3h52m0s |
| 2025-11-20 15:02 UTC | net: phy: mxl-gpy: fix link properties on USXGMII and internal PHYs | 1 | daniel@makrotopia.org | finished in 56m0s |
| 2025-11-20 14:17 UTC | net: phy: mxl-gpy: fix bogus error on USXGMII and integrated PHY | 1 | daniel@makrotopia.org | finished in 1h12m0s |
| 2025-11-19 19:59 UTC | net: phy: Introduce PHY ports representation | 17 | maxime.chevallier@bootlin.com | finished in 3h52m0s |
| 2025-11-19 14:03 UTC | Documentation: net: add flow control guide and document ethtool API | 8 | o.rempel@pengutronix.de | finished in 55m0s |
| 2025-11-19 12:47 UTC | net: phy: adin1100: Fix powerdown mode setting | 1 | ada@thorsis.com | finished in 1h2m0s |
| 2025-11-19 12:47 UTC | add hwtstamp_get callback to phy drivers | 3 | vadim.fedorenko@linux.dev | finished in 4h8m0s |
| 2025-11-19 07:05 UTC | net: phy: fixed_phy: fix missing initialization of fixed phy link | 1 | hkallweit1@gmail.com | finished in 1h44m0s |
| 2025-11-19 06:55 UTC | net: phy: fixed_phy: remove not needed initialization of phy_device members | 1 | hkallweit1@gmail.com | finished in 1h42m0s |
| 2025-11-18 19:05 UTC | Probe SJA1105 DSA children using MFD and dynamic OF nodes | 1 | vladimir.oltean@nxp.com | finished in 1h41m0s |
| 2025-11-18 13:58 UTC | net: mdio: improve reset handling of mdio devices | 3 | buday.csaba@prolan.hu | finished in 1h57m0s |
| 2025-11-18 08:02 UTC | TXGBE support more modules | 2 | jiawenwu@trustnetic.com | finished in 53m0s |
| 2025-11-18 04:59 UTC | Add SQI and SQI+ support for OATC14 10Base-T1S PHYs and Microchip T1S driver | 2 | parthiban.veerasooran@microchip.com | finished in 1h52m0s |
| 2025-11-17 23:40 UTC | Disable CLKOUT on RTL8211F(D)(I)-VD-CG | 3 | vladimir.oltean@nxp.com | finished in 1h34m0s |
| 2025-11-17 10:29 UTC | net: phylink: add missing supported link modes for the fixed-link | 3 | wei.fang@nxp.com | finished in 1h50m0s |
| 2025-11-17 09:28 UTC | net: mdio: improve reset handling of mdio devices | 2 | buday.csaba@prolan.hu | finished in 2h10m0s |
| 2025-11-16 15:48 UTC | net: phy: smsc: Skip soft reset when a hardware reset GPIO is provided | 1 | festevam@gmail.com | finished in 2h12m0s |
| 2025-11-16 02:38 UTC | net: phylink: add missing supported link modes for the fixed-link | 2 | wei.fang@nxp.com | finished in 1h38m0s |
| 2025-11-14 11:39 UTC | net: phy: fix doc for rgii_clock() | 1 | devnull@kernel.org | finished in 1h0m0s |
| 2025-11-14 08:42 UTC | net: phy: micrel: lan8814: Enable in-band auto-negotiation | 1 | horatiu.vultur@microchip.com | finished in 1h1m0s |
| 2025-11-14 05:28 UTC | net: phylink: add missing supported link modes for the fixed-link | 1 | wei.fang@nxp.com | finished in 1h33m0s |
| 2025-11-14 00:38 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 8 | inochiama@gmail.com | finished in 1h39m0s |
| 2025-11-13 23:26 UTC | eth: fbnic: Configure RDE settings for pause frame | 1 | mohsin.bashr@gmail.com | finished in 1h6m0s |
| 2025-11-13 16:33 UTC | net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support | 4 | alexander.duyck@gmail.com | finished in 1h45m0s |
| 2025-11-13 11:52 UTC | Add SQI and SQI+ support for OATC14 10Base-T1S PHYs and Microchip T1S driver | 1 | parthiban.veerasooran@microchip.com | finished in 1h41m0s |
| 2025-11-13 11:31 UTC | add hwtstamp_get callback to phy drivers | 2 | vadim.fedorenko@linux.dev | finished in 3h59m0s |
| 2025-11-13 08:14 UTC | net: phy: Introduce PHY ports representation | 16 | maxime.chevallier@bootlin.com | finished in 3h59m0s |
| 2025-11-12 21:11 UTC | net: pcs: xpcs-plat: fix MODULE_AUTHOR | 1 | vladimir.oltean@nxp.com | finished in 51m0s |
| 2025-11-12 21:06 UTC | net: phy: fixed_phy: remove setting supported/advertised modes from fixed_phy_register | 1 | hkallweit1@gmail.com | finished in 1h35m0s |
| 2025-11-12 20:19 UTC | Add support for PHY link active-level configuration in RZN1 MIIC driver | 1 | prabhakar.csengg@gmail.com | finished in 49m0s |
| 2025-11-12 18:04 UTC | eth: fbnic: Configure RDE settings for pause frame | 1 | mohsin.bashr@gmail.com | finished in 49m0s |
| 2025-11-12 13:59 UTC | net: dp83822/dp83tc811: do not blacklist EEE for now | 1 | o.rempel@pengutronix.de | skipped |
| 2025-11-12 13:57 UTC | net: phy: mscc: Add support for PHY LED control | 4 | prabhakar.csengg@gmail.com | finished in 48m0s |
| 2025-11-12 05:58 UTC | TXGBE support more modules | 1 | jiawenwu@trustnetic.com | finished in 41m0s |
| 2025-11-12 00:02 UTC | add hwtstamp_get callback to phy drivers | 1 | vadim.fedorenko@linux.dev | finished in 3h41m0s |
| 2025-11-11 10:52 UTC | Add DWMAC glue driver for Motorcomm YT6801 | 2 | ziyao@disroot.org | skipped |
| 2025-11-11 09:10 UTC | net: phy: mscc: Add support for PHY LED control | 3 | prabhakar.csengg@gmail.com | finished in 44m0s |
| 2025-11-10 22:33 UTC | net: phy: mxl-gpy: add support for MXL86211C | 1 | daniel@makrotopia.org | finished in 39m0s |
| 2025-11-10 21:20 UTC | net: phy: fixed_phy: initialize the link status as up | 1 | hkallweit1@gmail.com | finished in 1h38m0s |
| 2025-11-10 21:11 UTC | net: phy: fixed_phy: use genphy_read_abilities to simplify the code | 1 | hkallweit1@gmail.com | finished in 1h36m0s |
| 2025-11-10 16:00 UTC | net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support | 3 | alexander.duyck@gmail.com | finished in 1h47m0s |
| 2025-11-10 09:24 UTC | net: phy: dp83869: Support 1000Base-X SFP | 2 | romain.gantois@bootlin.com | finished in 41m0s |
| 2025-11-08 06:49 UTC | net: mdio: fix resource leak in mdiobus_register_device() | 1 | buday.csaba@prolan.hu | finished in 1h27m0s |
| 2025-11-07 20:12 UTC | net: phy: mscc: Add support for PHY LED control | 2 | prabhakar.csengg@gmail.com | finished in 46m0s |
| 2025-11-07 11:17 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 7 | inochiama@gmail.com | finished in 1h27m0s |
| 2025-11-07 11:08 UTC | Disable CLKOUT on RTL8211F(D)(I)-VD-CG | 2 | vladimir.oltean@nxp.com | finished in 1h27m0s |
| 2025-11-06 20:03 UTC | net: phy: mscc: Add support for PHY LEDs on VSC8541 | 1 | prabhakar.csengg@gmail.com | finished in 43m0s |
| 2025-11-06 11:10 UTC | Disable CLKOUT on RTL8211F(D)(I)-VD-CG | 1 | vladimir.oltean@nxp.com | finished in 2h5m0s |
| 2025-11-06 09:47 UTC | net: phy: Introduce PHY ports representation | 15 | maxime.chevallier@bootlin.com | finished in 4h5m0s |
| 2025-11-06 09:06 UTC | net: phy: micrel: lan8814 fix reset of the QSGMII interface | 1 | horatiu.vultur@microchip.com | finished in 55m0s |
| 2025-11-06 02:40 UTC | firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER | 3 | acourbot@nvidia.com | finished in 46m0s |
| 2025-11-05 22:09 UTC | net: phy: fixed_phy: shrink size of struct fixed_phy_status | 1 | hkallweit1@gmail.com | finished in 2h21m0s |
| 2025-11-05 13:31 UTC | net: phy: qt2025: Wait until PHY becomes ready | 1 | fujita.tomonori@gmail.com | finished in 1h4m0s |
| 2025-11-05 08:03 UTC | firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER | 2 | acourbot@nvidia.com |
finished
in 52m0s
[1 findings] |
| 2025-11-05 05:12 UTC | net: phy: Add Open Alliance TC14 10Base-T1S PHY cable diagnostic support | 3 | parthiban.veerasooran@microchip.com | finished in 1h38m0s |
| 2025-11-04 14:04 UTC | firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER | 1 | acourbot@nvidia.com | finished in 43m0s |
| 2025-11-04 10:28 UTC | net: phy: Add Open Alliance TC14 10Base-T1S PHY cable diagnostic support | 2 | parthiban.veerasooran@microchip.com | finished in 1h36m0s |
| 2025-11-04 10:20 UTC | net: phy: microchip_t1s: Add support for LAN867x Rev.D0 PHY | 1 | parthiban.veerasooran@microchip.com | finished in 1h32m0s |
| 2025-11-04 08:50 UTC | net: phy: dp83869: Support 1000Base-X SFP | 1 | romain.gantois@bootlin.com | finished in 1h10m0s |
| 2025-11-03 22:26 UTC | net: phy: make phy_device members pause and asym_pause bitfield bits | 1 | hkallweit1@gmail.com | finished in 3h42m0s |