| Published | Title | Version | Author | Status |
|---|---|---|---|---|
| 2025-11-12 05:58 UTC | TXGBE support more modules | 1 | jiawenwu@trustnetic.com | finished in 41m0s |
| 2025-11-12 00:02 UTC | add hwtstamp_get callback to phy drivers | 1 | vadim.fedorenko@linux.dev | finished in 3h41m0s |
| 2025-11-11 10:52 UTC | Add DWMAC glue driver for Motorcomm YT6801 | 2 | ziyao@disroot.org | skipped |
| 2025-11-11 09:10 UTC | net: phy: mscc: Add support for PHY LED control | 3 | prabhakar.csengg@gmail.com | finished in 44m0s |
| 2025-11-10 22:33 UTC | net: phy: mxl-gpy: add support for MXL86211C | 1 | daniel@makrotopia.org | finished in 39m0s |
| 2025-11-10 21:20 UTC | net: phy: fixed_phy: initialize the link status as up | 1 | hkallweit1@gmail.com | finished in 1h38m0s |
| 2025-11-10 21:11 UTC | net: phy: fixed_phy: use genphy_read_abilities to simplify the code | 1 | hkallweit1@gmail.com | finished in 1h36m0s |
| 2025-11-10 16:00 UTC | net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support | 3 | alexander.duyck@gmail.com | finished in 1h47m0s |
| 2025-11-10 09:24 UTC | net: phy: dp83869: Support 1000Base-X SFP | 2 | romain.gantois@bootlin.com | finished in 41m0s |
| 2025-11-08 06:49 UTC | net: mdio: fix resource leak in mdiobus_register_device() | 1 | buday.csaba@prolan.hu | finished in 1h27m0s |
| 2025-11-07 20:12 UTC | net: phy: mscc: Add support for PHY LED control | 2 | prabhakar.csengg@gmail.com | finished in 46m0s |
| 2025-11-07 11:17 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 7 | inochiama@gmail.com | finished in 1h27m0s |
| 2025-11-07 11:08 UTC | Disable CLKOUT on RTL8211F(D)(I)-VD-CG | 2 | vladimir.oltean@nxp.com | finished in 1h27m0s |
| 2025-11-06 20:03 UTC | net: phy: mscc: Add support for PHY LEDs on VSC8541 | 1 | prabhakar.csengg@gmail.com | finished in 43m0s |
| 2025-11-06 11:10 UTC | Disable CLKOUT on RTL8211F(D)(I)-VD-CG | 1 | vladimir.oltean@nxp.com | finished in 2h5m0s |
| 2025-11-06 09:47 UTC | net: phy: Introduce PHY ports representation | 15 | maxime.chevallier@bootlin.com | finished in 4h5m0s |
| 2025-11-06 09:06 UTC | net: phy: micrel: lan8814 fix reset of the QSGMII interface | 1 | horatiu.vultur@microchip.com | finished in 55m0s |
| 2025-11-06 02:40 UTC | firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER | 3 | acourbot@nvidia.com | finished in 46m0s |
| 2025-11-05 22:09 UTC | net: phy: fixed_phy: shrink size of struct fixed_phy_status | 1 | hkallweit1@gmail.com | finished in 2h21m0s |
| 2025-11-05 13:31 UTC | net: phy: qt2025: Wait until PHY becomes ready | 1 | fujita.tomonori@gmail.com | finished in 1h4m0s |
| 2025-11-05 08:03 UTC | firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER | 2 | acourbot@nvidia.com |
finished
in 52m0s
[1 findings] |
| 2025-11-05 05:12 UTC | net: phy: Add Open Alliance TC14 10Base-T1S PHY cable diagnostic support | 3 | parthiban.veerasooran@microchip.com | finished in 1h38m0s |
| 2025-11-04 14:04 UTC | firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER | 1 | acourbot@nvidia.com | finished in 43m0s |
| 2025-11-04 10:28 UTC | net: phy: Add Open Alliance TC14 10Base-T1S PHY cable diagnostic support | 2 | parthiban.veerasooran@microchip.com | finished in 1h36m0s |
| 2025-11-04 10:20 UTC | net: phy: microchip_t1s: Add support for LAN867x Rev.D0 PHY | 1 | parthiban.veerasooran@microchip.com | finished in 1h32m0s |
| 2025-11-04 08:50 UTC | net: phy: dp83869: Support 1000Base-X SFP | 1 | romain.gantois@bootlin.com | finished in 1h10m0s |
| 2025-11-03 22:26 UTC | net: phy: make phy_device members pause and asym_pause bitfield bits | 1 | hkallweit1@gmail.com | finished in 3h42m0s |
| 2025-11-03 17:00 UTC | net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support | 2 | alexander.duyck@gmail.com | finished in 1h42m0s |
| 2025-11-03 15:09 UTC | convert drivers to use ndo_hwtstamp callbacks part 3 | 2 | vadim.fedorenko@linux.dev | finished in 44m0s |
| 2025-11-03 12:18 UTC | net: dsa: lantiq_gswip: Add support for MaxLinear GSW1xx switch family | 7 | daniel@makrotopia.org | finished in 52m0s |
| 2025-11-03 10:49 UTC | net: altera-tse: Cleanup init sequence | 2 | maxime.chevallier@bootlin.com | finished in 58m0s |
| 2025-11-03 08:13 UTC | dt-bindings: net: ethernet-phy: clarify when compatible must specify PHY ID | 2 | buday.csaba@prolan.hu | finished in 45m0s |
| 2025-11-03 03:05 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 6 | inochiama@gmail.com | finished in 1h49m0s |
| 2025-11-02 15:26 UTC | net: phy: realtek: add interrupt support for RTL8221B | 1 | olek2@wp.pl | finished in 1h27m0s |
| 2025-10-31 19:19 UTC | net: dsa: lantiq_gswip: Add support for MaxLinear GSW1xx switch family | 6 | daniel@makrotopia.org | finished in 51m0s |
| 2025-10-31 12:16 UTC | net: phy: micrel: lan8842 erratas | 4 | horatiu.vultur@microchip.com | finished in 59m0s |
| 2025-10-31 11:32 UTC | net: mdio: improve reset handling of mdio devices | 1 | buday.csaba@prolan.hu | finished in 1h48m0s |
| 2025-10-31 08:15 UTC | dt-bindings: net: ethernet-phy: clarify when compatible must specify PHY ID | 1 | buday.csaba@prolan.hu | finished in 42m0s |
| 2025-10-31 01:24 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 5 | inochiama@gmail.com | finished in 1h32m0s |
| 2025-10-31 00:46 UTC | convert drivers to use ndo_hwtstamp callbacks part 3 | 1 | vadim.fedorenko@linux.dev | finished in 43m0s |
| 2025-10-30 21:41 UTC | net: phy: remove fixed_phy_add and first its users | 1 | hkallweit1@gmail.com | finished in 1h32m0s |
| 2025-10-30 18:24 UTC | net: stmmac: rename devlink parameter ts_coarse into phc_coarse_adj | 1 | maxime.chevallier@bootlin.com | finished in 57m0s |
| 2025-10-30 11:27 UTC | net: dsa: lantiq_gswip: Add support for MaxLinear GSW1xx switch family | 5 | daniel@makrotopia.org | finished in 42m0s |
| 2025-10-30 10:24 UTC | net: altera-tse: Cleanup init sequence | 1 | maxime.chevallier@bootlin.com | finished in 58m0s |
| 2025-10-30 10:22 UTC | net: phy: microchip_t1s: Add support for LAN867x Rev.D0 PHY | 1 | parthiban.veerasooran@microchip.com | finished in 1h4m0s |
| 2025-10-30 07:49 UTC | net: phy: micrel: lan8842 erratas | 3 | horatiu.vultur@microchip.com | finished in 49m0s |
| 2025-10-29 10:42 UTC | net: phy: nxp-c45-tja11xx: config_init restore macsec config | 1 | andrei.botila@oss.nxp.com | finished in 39m0s |
| 2025-10-29 10:23 UTC | net: mdio: implement optional PHY reset before MDIO access | 5 | buday.csaba@prolan.hu | finished in 1h32m0s |
| 2025-10-29 07:24 UTC | net: phy: micrel: lan8842 erratas | 2 | horatiu.vultur@microchip.com | finished in 46m0s |
| 2025-10-29 03:00 UTC | Correct the config according to the motorcomm chip manual | 1 | cong.yi@linux.dev | finished in 44m0s |
| 2025-10-29 00:16 UTC | net: dsa: lantiq_gswip: Add support for MaxLinear GSW1xx switch family | 4 | daniel@makrotopia.org | finished in 40m0s |
| 2025-10-28 01:59 UTC | net: phy: motorcomm: Fix the issue in the code regarding the incorrect use of time units | 1 | cong.yi@linux.dev | finished in 40m0s |
| 2025-10-28 00:38 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 4 | inochiama@gmail.com | finished in 1h29m0s |
| 2025-10-27 12:40 UTC | net: phy: micrel: lan8842 erratas | 1 | horatiu.vultur@microchip.com | finished in 1h0m0s |
| 2025-10-27 12:27 UTC | ethtool: introduce PHY MSE diagnostics UAPI and drivers | 8 | o.rempel@pengutronix.de | finished in 2m0s |
| 2025-10-26 23:43 UTC | net: dsa: lantiq_gswip: Add support for MaxLinear GSW1xx switch family | 3 | daniel@makrotopia.org | finished in 37m0s |
| 2025-10-26 13:36 UTC | net: phy: motorcomm: Add support for PHY LEDs on YT8531 | 1 | cnsztl@gmail.com | finished in 38m0s |
| 2025-10-25 20:53 UTC | Resolve ARM kCFI build failure in idpf xsk.c | 1 | nathan@kernel.org | finished in 38m0s |
| 2025-10-25 18:49 UTC | net: phy: add iterator mdiobus_for_each_phy | 3 | hkallweit1@gmail.com | finished in 1h32m0s |
| 2025-10-25 18:35 UTC | net: stmmac: mdio: fix incorrect phy address check | 2 | hkallweit1@gmail.com | finished in 49m0s |
| 2025-10-25 17:05 UTC | net: dsa: yt921x: Add STP/MST/HSR/LAG support | 2 | mmyangfl@gmail.com | finished in 36m0s |
| 2025-10-25 14:47 UTC | net: dsa: lantiq_gswip: Add support for MaxLinear GSW1xx switch family | 2 | daniel@makrotopia.org | finished in 38m0s |
| 2025-10-24 20:46 UTC | net: ethernet: ti: am65-cpsw: add network flow classification support | 5 | rogerq@kernel.org | finished in 55m0s |
| 2025-10-24 20:40 UTC | net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support | 1 | alexander.duyck@gmail.com | finished in 1h38m0s |
| 2025-10-24 20:21 UTC | net: phy: add iterator mdiobus_for_each_phy | 2 | hkallweit1@gmail.com | finished in 1h33m0s |
| 2025-10-24 19:26 UTC | net: stmmac: mdio: fix smatch warning | 1 | hkallweit1@gmail.com | finished in 1h1m0s |
| 2025-10-24 17:01 UTC | net: dsa: lantiq_gswip: Add support for MaxLinear GSW1xx switch family | 1 | daniel@makrotopia.org | finished in 54m0s |
| 2025-10-24 09:49 UTC | net: phy: realtek: Add RTL8224 cable testing support | 1 | se@simonwunderlich.de | finished in 1h26m0s |
| 2025-10-24 07:07 UTC | net: stmmac: Add support for coarse timestamping | 2 | maxime.chevallier@bootlin.com | finished in 44m0s |
| 2025-10-24 03:32 UTC | net: dsa: yt921x: Add STP/MST/HSR/LAG support | 1 | mmyangfl@gmail.com | finished in 42m0s |
| 2025-10-24 01:55 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 3 | inochiama@gmail.com | finished in 1h34m0s |
| 2025-10-23 22:04 UTC | convert net drivers to ndo_hwtstamp API part 2 | 5 | vadim.fedorenko@linux.dev | finished in 38m0s |
| 2025-10-23 19:13 UTC | phy: mscc: Fix PTP for VSC8574 and VSC8572 | 5 | horatiu.vultur@microchip.com | finished in 48m0s |
| 2025-10-23 16:22 UTC | net: macb: EyeQ5 support | 3 | theo.lebrun@bootlin.com | finished in 42m0s |
| 2025-10-23 14:58 UTC | net: airoha: initial phylink support | 2 | ansuelsmth@gmail.com | finished in 47m0s |
| 2025-10-23 14:48 UTC | net: phy: dp83867: Disable EEE support as not implemented | 1 | ghidoliemanuele@gmail.com | finished in 52m0s |
| 2025-10-22 10:48 UTC | convert net drivers to ndo_hwtstamp API part 2 | 4 | vadim.fedorenko@linux.dev | finished in 49m0s |
| 2025-10-22 09:08 UTC | net: mdio: implement optional PHY reset before MDIO access | 4 | buday.csaba@prolan.hu | finished in 1h27m0s |
| 2025-10-22 07:38 UTC | net: macb: EyeQ5 support | 2 | theo.lebrun@bootlin.com | finished in 47m0s |
| 2025-10-21 19:33 UTC | net: airoha: initial phylink support | 1 | ansuelsmth@gmail.com | finished in 55m0s |
| 2025-10-21 16:32 UTC | net: macb: EyeQ5 support (alongside generic PHY driver in syscon) | 1 | theo.lebrun@bootlin.com | finished in 46m0s |
| 2025-10-21 13:20 UTC | net: phy: micrel: always set shared->phydev for LAN8814 | 1 | robert.marko@sartura.hr | finished in 1h2m0s |
| 2025-10-21 11:16 UTC | net: dsa: lantiq_gswip: use regmap for register access | 5 | daniel@makrotopia.org | finished in 51m0s |
| 2025-10-21 09:47 UTC | convert net drivers to ndo_hwtstamp API part 2 | 3 | vadim.fedorenko@linux.dev | finished in 49m0s |
| 2025-10-21 07:07 UTC | net: phy: micrel: Add support for non PTP SKUs for lan8814 | 2 | horatiu.vultur@microchip.com | finished in 40m0s |
| 2025-10-20 12:57 UTC | net: dsa: lantiq_gswip: use regmap for register access | 4 | daniel@makrotopia.org | finished in 36m0s |
| 2025-10-20 11:11 UTC | PCI: mediatek: add support AN7583 + YAML rework | 6 | ansuelsmth@gmail.com | finished in 41m0s |
| 2025-10-20 10:31 UTC | ethtool: introduce PHY MSE diagnostics UAPI and drivers | 7 | o.rempel@pengutronix.de | finished in 3h43m0s |
| 2025-10-20 09:54 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 2 | inochiama@gmail.com | finished in 1h32m0s |
| 2025-10-19 12:46 UTC | net: dsa: lantiq_gswip: use regmap for register access | 3 | daniel@makrotopia.org | finished in 40m0s |
| 2025-10-18 18:48 UTC | net: stmmac: mdio: use phy_find_first to simplify stmmac_mdio_register | 2 | hkallweit1@gmail.com | finished in 40m0s |
| 2025-10-18 02:30 UTC | net: dsa: lantiq_gswip: use regmap for register access | 2 | daniel@makrotopia.org | skipped |
| 2025-10-17 20:41 UTC | net: phy: add iterator phy_for_each | 1 | hkallweit1@gmail.com | finished in 1h29m0s |
| 2025-10-17 20:12 UTC | net: phy: fixed_phy: add helper fixed_phy_register_100fd | 1 | hkallweit1@gmail.com | finished in 1h30m0s |
| 2025-10-17 19:47 UTC | net: stmmac: mdio: use phy_find_first to simplify stmmac_mdio_register | 1 | hkallweit1@gmail.com | finished in 38m0s |
| 2025-10-17 19:35 UTC | net: phy: micrel: simplify return in ksz9477_phy_errata() | 1 | alok.a.tiwari@oracle.com | finished in 39m0s |
| 2025-10-17 18:21 UTC | convert net drivers to ndo_hwtstamp API part 2 | 2 | vadim.fedorenko@linux.dev | finished in 38m0s |
| 2025-10-17 16:10 UTC | net: mdio: implement optional PHY reset before MDIO access | 3 | buday.csaba@prolan.hu | finished in 1h29m0s |
| 2025-10-17 10:47 UTC | ethtool: introduce PHY MSE diagnostics UAPI and drivers | 6 | o.rempel@pengutronix.de | finished in 3h46m0s |
| 2025-10-17 07:47 UTC | net: phy: micrel: Add support for non PTP SKUs for lan8814 | 1 | horatiu.vultur@microchip.com | finished in 38m0s |