| Published | Title | Version | Author | Status |
|---|---|---|---|---|
| 2025-11-17 21:18 UTC | net: Add 1600Gbps (1.6T) link mode support | 1 | tariqt@nvidia.com | finished in 4h0m0s |
| 2025-11-17 19:16 UTC | r8169: add support for RTL8127ATF | 1 | fabio.baltieri@gmail.com | finished in 53m0s |
| 2025-11-17 10:29 UTC | net: phylink: add missing supported link modes for the fixed-link | 3 | wei.fang@nxp.com | finished in 1h50m0s |
| 2025-11-17 09:28 UTC | net: mdio: improve reset handling of mdio devices | 2 | buday.csaba@prolan.hu | finished in 2h10m0s |
| 2025-11-16 15:48 UTC | net: phy: smsc: Skip soft reset when a hardware reset GPIO is provided | 1 | festevam@gmail.com | finished in 2h12m0s |
| 2025-11-16 02:38 UTC | net: phylink: add missing supported link modes for the fixed-link | 2 | wei.fang@nxp.com | finished in 1h38m0s |
| 2025-11-14 15:28 UTC | net: stmmac: clean up plat_dat allocation/initialisation | 1 | rmk@armlinux.org.uk | finished in 50m0s |
| 2025-11-14 11:39 UTC | net: phy: fix doc for rgii_clock() | 1 | devnull@kernel.org | finished in 1h0m0s |
| 2025-11-14 08:42 UTC | net: phy: micrel: lan8814: Enable in-band auto-negotiation | 1 | horatiu.vultur@microchip.com | finished in 1h1m0s |
| 2025-11-14 05:28 UTC | net: phylink: add missing supported link modes for the fixed-link | 1 | wei.fang@nxp.com | finished in 1h33m0s |
| 2025-11-14 00:38 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 8 | inochiama@gmail.com | finished in 1h39m0s |
| 2025-11-13 21:09 UTC | r8169: bail out from probe if fiber mode is detected on RTL8127AF | 1 | hkallweit1@gmail.com | finished in 59m0s |
| 2025-11-13 17:46 UTC | net: stmmac: rk: use PHY_INTF_SEL_x | 1 | rmk@armlinux.org.uk | finished in 1h13m0s |
| 2025-11-13 16:33 UTC | net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support | 4 | alexander.duyck@gmail.com | finished in 1h45m0s |
| 2025-11-13 11:52 UTC | Add SQI and SQI+ support for OATC14 10Base-T1S PHYs and Microchip T1S driver | 1 | parthiban.veerasooran@microchip.com | finished in 1h41m0s |
| 2025-11-13 11:31 UTC | add hwtstamp_get callback to phy drivers | 2 | vadim.fedorenko@linux.dev | finished in 3h59m0s |
| 2025-11-13 11:29 UTC | net: phy: disable EEE on TI PHYs | 2 | rmk@armlinux.org.uk | finished in 1h35m0s |
| 2025-11-13 08:14 UTC | net: phy: Introduce PHY ports representation | 16 | maxime.chevallier@bootlin.com | finished in 3h59m0s |
| 2025-11-12 21:11 UTC | net: pcs: xpcs-plat: fix MODULE_AUTHOR | 1 | vladimir.oltean@nxp.com | finished in 51m0s |
| 2025-11-12 21:06 UTC | net: phy: fixed_phy: remove setting supported/advertised modes from fixed_phy_register | 1 | hkallweit1@gmail.com | finished in 1h35m0s |
| 2025-11-12 20:46 UTC | net: dsa: remove definition of struct dsa_switch_driver | 1 | hkallweit1@gmail.com | finished in 46m0s |
| 2025-11-12 20:19 UTC | Add support for PHY link active-level configuration in RZN1 MIIC driver | 1 | prabhakar.csengg@gmail.com | finished in 49m0s |
| 2025-11-12 13:57 UTC | net: phy: mscc: Add support for PHY LED control | 4 | prabhakar.csengg@gmail.com | finished in 48m0s |
| 2025-11-12 00:02 UTC | add hwtstamp_get callback to phy drivers | 1 | vadim.fedorenko@linux.dev | finished in 3h41m0s |
| 2025-11-11 11:38 UTC | net: phy: disable EEE on TI PHYs | 1 | rmk@armlinux.org.uk | finished in 1h40m0s |
| 2025-11-11 11:26 UTC | net: stmmac: always allocate mac_device_info | 1 | rmk@armlinux.org.uk | finished in 1h6m0s |
| 2025-11-11 11:26 UTC | net: stmmac: clean up stmmac_reset() | 1 | rmk@armlinux.org.uk | finished in 1h4m0s |
| 2025-11-11 11:26 UTC | net: stmmac: improve ndev->max_mtu setup readability | 1 | rmk@armlinux.org.uk | finished in 55m0s |
| 2025-11-11 10:52 UTC | Add DWMAC glue driver for Motorcomm YT6801 | 2 | ziyao@disroot.org | skipped |
| 2025-11-11 09:28 UTC | r8169: add support for RTL8125K | 2 | javen_xu@realsil.com.cn | finished in 1h10m0s |
| 2025-11-11 09:10 UTC | net: phy: mscc: Add support for PHY LED control | 3 | prabhakar.csengg@gmail.com | finished in 44m0s |
| 2025-11-11 08:11 UTC | net: stmmac: convert glue drivers to use stmmac_get_phy_intf_sel() | 2 | rmk@armlinux.org.uk | finished in 58m0s |
| 2025-11-10 22:33 UTC | net: phy: mxl-gpy: add support for MXL86211C | 1 | daniel@makrotopia.org | finished in 39m0s |
| 2025-11-10 21:20 UTC | net: phy: fixed_phy: initialize the link status as up | 1 | hkallweit1@gmail.com | finished in 1h38m0s |
| 2025-11-10 21:11 UTC | net: phy: fixed_phy: use genphy_read_abilities to simplify the code | 1 | hkallweit1@gmail.com | finished in 1h36m0s |
| 2025-11-10 16:00 UTC | net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support | 3 | alexander.duyck@gmail.com | finished in 1h47m0s |
| 2025-11-10 14:42 UTC | net: stmmac: convert meson8b to use stmmac_get_phy_intf_sel() | 2 | rmk@armlinux.org.uk | finished in 55m0s |
| 2025-11-10 09:35 UTC | r8169: add support for RTL8125K | 1 | javen_xu@realsil.com.cn | finished in 47m0s |
| 2025-11-10 09:24 UTC | net: phy: dp83869: Support 1000Base-X SFP | 2 | romain.gantois@bootlin.com | finished in 41m0s |
| 2025-11-08 21:59 UTC | net: dsa: loop: use new helper fixed_phy_register_100fd to simplify the code | 1 | hkallweit1@gmail.com | finished in 38m0s |
| 2025-11-08 06:49 UTC | net: mdio: fix resource leak in mdiobus_register_device() | 1 | buday.csaba@prolan.hu | finished in 1h27m0s |
| 2025-11-07 20:12 UTC | net: phy: mscc: Add support for PHY LED control | 2 | prabhakar.csengg@gmail.com | finished in 46m0s |
| 2025-11-07 14:28 UTC | net: stmmac: convert glue drivers to use stmmac_get_phy_intf_sel() | 1 | rmk@armlinux.org.uk | finished in 1h3m0s |
| 2025-11-07 11:17 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 7 | inochiama@gmail.com | finished in 1h27m0s |
| 2025-11-07 11:08 UTC | Disable CLKOUT on RTL8211F(D)(I)-VD-CG | 2 | vladimir.oltean@nxp.com | finished in 1h27m0s |
| 2025-11-07 08:28 UTC | net: stmmac: ingenic: convert to set_phy_intf_sel() | 3 | rmk@armlinux.org.uk | finished in 41m0s |
| 2025-11-06 20:03 UTC | net: phy: mscc: Add support for PHY LEDs on VSC8541 | 1 | prabhakar.csengg@gmail.com | finished in 43m0s |
| 2025-11-06 11:23 UTC | net: stmmac: lpc18xx and sti: convert to set_phy_intf_sel() | 1 | rmk@armlinux.org.uk | finished in 14m0s |
| 2025-11-06 11:10 UTC | Disable CLKOUT on RTL8211F(D)(I)-VD-CG | 1 | vladimir.oltean@nxp.com | finished in 2h5m0s |
| 2025-11-06 09:47 UTC | net: phy: Introduce PHY ports representation | 15 | maxime.chevallier@bootlin.com | finished in 4h5m0s |
| 2025-11-06 09:06 UTC | net: phy: micrel: lan8814 fix reset of the QSGMII interface | 1 | horatiu.vultur@microchip.com | finished in 55m0s |
| 2025-11-06 08:57 UTC | net: stmmac: ingenic: convert to set_phy_intf_sel() | 2 | rmk@armlinux.org.uk | finished in 54m0s |
| 2025-11-06 02:40 UTC | firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER | 3 | acourbot@nvidia.com | finished in 46m0s |
| 2025-11-05 22:09 UTC | net: phy: fixed_phy: shrink size of struct fixed_phy_status | 1 | hkallweit1@gmail.com | finished in 2h21m0s |
| 2025-11-05 13:31 UTC | net: phy: qt2025: Wait until PHY becomes ready | 1 | fujita.tomonori@gmail.com | finished in 1h4m0s |
| 2025-11-05 13:26 UTC | net: stmmac: ingenic: convert to set_phy_intf_sel() | 1 | rmk@armlinux.org.uk | finished in 58m0s |
| 2025-11-05 08:03 UTC | firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER | 2 | acourbot@nvidia.com |
finished
in 52m0s
[1 findings] |
| 2025-11-05 05:12 UTC | net: phy: Add Open Alliance TC14 10Base-T1S PHY cable diagnostic support | 3 | parthiban.veerasooran@microchip.com | finished in 1h38m0s |
| 2025-11-04 14:04 UTC | firmware_loader: make RUST_FW_LOADER_ABSTRACTIONS select FW_LOADER | 1 | acourbot@nvidia.com | finished in 43m0s |
| 2025-11-04 10:28 UTC | net: phy: Add Open Alliance TC14 10Base-T1S PHY cable diagnostic support | 2 | parthiban.veerasooran@microchip.com | finished in 1h36m0s |
| 2025-11-04 10:20 UTC | net: phy: microchip_t1s: Add support for LAN867x Rev.D0 PHY | 1 | parthiban.veerasooran@microchip.com | finished in 1h32m0s |
| 2025-11-04 08:50 UTC | net: phy: dp83869: Support 1000Base-X SFP | 1 | romain.gantois@bootlin.com | finished in 1h10m0s |
| 2025-11-03 22:26 UTC | net: phy: make phy_device members pause and asym_pause bitfield bits | 1 | hkallweit1@gmail.com | finished in 3h42m0s |
| 2025-11-03 17:00 UTC | net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support | 2 | alexander.duyck@gmail.com | finished in 1h42m0s |
| 2025-11-03 11:49 UTC | net: stmmac: multi-interface stmmac | 1 | rmk@armlinux.org.uk | finished in 9m0s |
| 2025-11-03 08:13 UTC | dt-bindings: net: ethernet-phy: clarify when compatible must specify PHY ID | 2 | buday.csaba@prolan.hu | finished in 45m0s |
| 2025-11-03 03:05 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 6 | inochiama@gmail.com | finished in 1h49m0s |
| 2025-11-02 15:26 UTC | net: phy: realtek: add interrupt support for RTL8221B | 1 | olek2@wp.pl | finished in 1h27m0s |
| 2025-10-31 16:15 UTC | net: mdio: Check regmap pointer returned by device_node_to_regmap() | 1 | alok.a.tiwari@oracle.com | finished in 51m0s |
| 2025-10-31 12:16 UTC | net: phy: micrel: lan8842 erratas | 4 | horatiu.vultur@microchip.com | finished in 59m0s |
| 2025-10-31 11:32 UTC | net: mdio: improve reset handling of mdio devices | 1 | buday.csaba@prolan.hu | finished in 1h48m0s |
| 2025-10-31 11:10 UTC | net: stmmac: imx: use phylink's interface mode for set_clk_tx_rate() | 1 | rmk@armlinux.org.uk | finished in 43m0s |
| 2025-10-31 08:15 UTC | dt-bindings: net: ethernet-phy: clarify when compatible must specify PHY ID | 1 | buday.csaba@prolan.hu | finished in 42m0s |
| 2025-10-31 01:24 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 5 | inochiama@gmail.com | finished in 1h32m0s |
| 2025-10-30 21:41 UTC | net: phy: remove fixed_phy_add and first its users | 1 | hkallweit1@gmail.com | finished in 1h32m0s |
| 2025-10-30 10:22 UTC | net: phy: microchip_t1s: Add support for LAN867x Rev.D0 PHY | 1 | parthiban.veerasooran@microchip.com | finished in 1h4m0s |
| 2025-10-30 10:20 UTC | net: stmmac: qcom-ethqos: remove MAC_CTRL_REG modification | 2 | rmk@armlinux.org.uk | finished in 1h3m0s |
| 2025-10-30 07:49 UTC | net: phy: micrel: lan8842 erratas | 3 | horatiu.vultur@microchip.com | finished in 49m0s |
| 2025-10-29 10:42 UTC | net: phy: nxp-c45-tja11xx: config_init restore macsec config | 1 | andrei.botila@oss.nxp.com | finished in 39m0s |
| 2025-10-29 10:23 UTC | net: mdio: implement optional PHY reset before MDIO access | 5 | buday.csaba@prolan.hu | finished in 1h32m0s |
| 2025-10-29 07:24 UTC | net: phy: micrel: lan8842 erratas | 2 | horatiu.vultur@microchip.com | finished in 46m0s |
| 2025-10-29 03:00 UTC | Correct the config according to the motorcomm chip manual | 1 | cong.yi@linux.dev | finished in 44m0s |
| 2025-10-29 00:03 UTC | net: stmmac: hwif.c cleanups | 3 | rmk@armlinux.org.uk | finished in 39m0s |
| 2025-10-28 01:59 UTC | net: phy: motorcomm: Fix the issue in the code regarding the incorrect use of time units | 1 | cong.yi@linux.dev | finished in 40m0s |
| 2025-10-28 00:38 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 4 | inochiama@gmail.com | finished in 1h29m0s |
| 2025-10-27 12:40 UTC | net: phy: micrel: lan8842 erratas | 1 | horatiu.vultur@microchip.com | finished in 1h0m0s |
| 2025-10-27 12:27 UTC | ethtool: introduce PHY MSE diagnostics UAPI and drivers | 8 | o.rempel@pengutronix.de | finished in 2m0s |
| 2025-10-26 13:36 UTC | net: phy: motorcomm: Add support for PHY LEDs on YT8531 | 1 | cnsztl@gmail.com | finished in 38m0s |
| 2025-10-25 20:48 UTC | net: stmmac: phylink PCS conversion part 3 (dodgy stuff) | 1 | rmk@armlinux.org.uk | finished in 39m0s |
| 2025-10-25 18:49 UTC | net: phy: add iterator mdiobus_for_each_phy | 3 | hkallweit1@gmail.com | finished in 1h32m0s |
| 2025-10-25 18:35 UTC | net: stmmac: mdio: fix incorrect phy address check | 2 | hkallweit1@gmail.com | finished in 49m0s |
| 2025-10-24 20:40 UTC | net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support | 1 | alexander.duyck@gmail.com | finished in 1h38m0s |
| 2025-10-24 20:21 UTC | net: phy: add iterator mdiobus_for_each_phy | 2 | hkallweit1@gmail.com | finished in 1h33m0s |
| 2025-10-24 19:26 UTC | net: stmmac: mdio: fix smatch warning | 1 | hkallweit1@gmail.com | finished in 1h1m0s |
| 2025-10-24 12:49 UTC | net: stmmac: hwif.c cleanups | 1 | rmk@armlinux.org.uk | finished in 39m0s |
| 2025-10-24 09:49 UTC | net: phy: realtek: Add RTL8224 cable testing support | 1 | se@simonwunderlich.de | finished in 1h26m0s |
| 2025-10-24 01:55 UTC | net: stmmac: dwmac-sophgo: Add phy interface filter | 3 | inochiama@gmail.com | finished in 1h34m0s |
| 2025-10-23 19:13 UTC | phy: mscc: Fix PTP for VSC8574 and VSC8572 | 5 | horatiu.vultur@microchip.com | finished in 48m0s |
| 2025-10-23 14:48 UTC | net: phy: dp83867: Disable EEE support as not implemented | 1 | ghidoliemanuele@gmail.com | finished in 52m0s |
| 2025-10-23 09:46 UTC | net: stmmac: pcs support part 2 | 1 | rmk@armlinux.org.uk | finished in 51m0s |