| Published | Title | Version | Author | Status |
|---|---|---|---|---|
| 2025-08-13 11:21 UTC | dt-bindings: net: realtek,rtl82xx: document wakeup-source property | 1 | rmk@armlinux.org.uk | finished in 1h46m0s |
| 2025-08-13 10:04 UTC | net: phy: realtek: fix RTL8211F wake-on-lan support | 1 | rmk@armlinux.org.uk | finished in 1h48m0s |
| 2025-08-13 08:14 UTC | ethtool: introduce PHY MSE diagnostics UAPI and drivers | 1 | o.rempel@pengutronix.de | skipped |
| 2025-08-13 07:44 UTC | net: phy: mscc: report and configure in-band auto-negotiation for SGMII/QSGMII | 1 | vladimir.oltean@nxp.com | finished in 1h29m0s |
| 2025-08-13 07:26 UTC | phy: mscc: Fix timestamping for vsc8584 | 3 | horatiu.vultur@microchip.com | finished in 1h54m0s |
| 2025-08-13 06:30 UTC | net: phy: micrel: Add support for lan8842 | 3 | horatiu.vultur@microchip.com | skipped |
| 2025-08-13 05:44 UTC | net: phy: realtek: convert RTL8226-CG to c45 only | 4 | markus.stockhausen@gmx.de | finished in 5m0s |
| 2025-08-12 10:59 UTC | net: explicitly check in of_phy_is_fixed_link() for managed = "in-band-status" | 1 | vladimir.oltean@nxp.com | finished in 1h50m0s |
| 2025-08-11 19:45 UTC | net: phy: fixed: remove usage of a faux device | 1 | hkallweit1@gmail.com | finished in 1h30m0s |
| 2025-08-11 18:50 UTC | net: stmmac: improbe suspend/resume architecture | 1 | rmk@armlinux.org.uk | finished in 1h31m0s |
| 2025-08-11 16:59 UTC | net: mdio: mdio-bcm-unimac: Refine incorrect clock message | 1 | florian.fainelli@broadcom.com | finished in 1h36m0s |
| 2025-08-08 12:16 UTC | net: stmmac: dwc-qos: fix clk prepare/enable leak on probe failure | 1 | rmk@armlinux.org.uk | finished in 1h27m0s |
| 2025-08-08 12:16 UTC | net: stmmac: rk: put the PHY clock on remove | 2 | rmk@armlinux.org.uk | finished in 1h44m0s |
| 2025-08-07 13:54 UTC | net: mdiobus: release reset_gpio in mdiobus_unregister_device() | 2 | csokas.bence@prolan.hu | finished in 1h30m0s |
| 2025-08-07 13:15 UTC | net: phy: motorcomm: make const array mac_addr_reg static | 1 | colin.i.king@gmail.com | finished in 1h31m0s |
| 2025-08-07 08:48 UTC | net: stmmac: rk: put the PHY clock on remove | 1 | rmk@armlinux.org.uk | finished in 1h34m0s |
| 2025-08-07 04:08 UTC | net: phy: nxp-c45-tja11xx: fix the PHY ID mismatch issue when using C45 | 1 | xiaoning.wang@nxp.com | finished in 1h26m0s |
| 2025-08-06 05:46 UTC | phy: mscc: Fix timestamping for vsc8584 | 2 | horatiu.vultur@microchip.com | finished in 1h29m0s |
| 2025-08-04 10:50 UTC | net: phy: realtek: convert RTL8226-CG to c45 only | 3 | markus.stockhausen@gmx.de | finished in 1h32m0s |
| 2025-08-01 21:27 UTC | Revert "net: mdio_bus: Use devm for getting reset GPIO" | 1 | kuba@kernel.org | finished in 4h33m0s |
| 2025-07-31 12:19 UTC | phy: mscc: Fix timestamping for vsc8584 | 1 | horatiu.vultur@microchip.com | finished in 1h33m0s |
| 2025-07-31 05:44 UTC | net: phy: realtek: convert RTL8226-CG to c45 only | 2 | markus.stockhausen@gmx.de | finished in 1h34m0s |
| 2025-07-30 20:25 UTC | net: mdio: mdio-bcm-unimac: Correct rate fallback logic | 2 | florian.fainelli@broadcom.com | finished in 1h32m0s |
| 2025-07-30 20:23 UTC | net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect | 1 | hkallweit1@gmail.com | finished in 1h30m0s |
| 2025-07-29 21:31 UTC | net: mdio: mdio-bcm-unimac: Correct rate fallback logic | 1 | florian.fainelli@broadcom.com | finished in 1h35m0s |
| 2025-07-29 08:21 UTC | net: phylink: add .pcs_link_down PCS OP | 1 | ansuelsmth@gmail.com | finished in 1h37m0s |
| 2025-07-28 15:45 UTC | net: stmmac: EEE and WoL cleanups | 1 | rmk@armlinux.org.uk | finished in 1h37m0s |
| 2025-07-28 15:34 UTC | net: mdio_bus: Use devm for getting reset GPIO | 1 | csokas.bence@prolan.hu | finished in 1h36m0s |
| 2025-07-28 15:29 UTC | net: phy: smsc: add proper reset flags for LAN8710A | 1 | csokas.bence@prolan.hu | finished in 1h41m0s |
| 2025-07-26 14:03 UTC | phy: mscc: Fix parsing of unicast frames | 1 | horatiu.vultur@microchip.com | finished in 1h30m0s |
| 2025-07-26 00:10 UTC | phy: dp83869: fix interrupts issue when using with an optical fiber sfp. to correctly clear the interrupts both status registers must be read. | 1 | chalianis1@gmail.com | finished in 1h36m0s |
| 2025-07-26 00:09 UTC | phy: dp83869: fix interrupts issue when using with an optical fiber sfp. to correctly clear the interrupts both status registers must be read. | 1 | chalianis1@gmail.com | finished in 1h34m0s |
| 2025-07-24 20:08 UTC | net: phy: micrel: Add support for lan8842 | 2 | horatiu.vultur@microchip.com | finished in 1h28m0s |
| 2025-07-24 14:39 UTC | net: phy: realtek: Reset after clock enable | 2 | sebastian.reichel@collabora.com | finished in 1h35m0s |
| 2025-07-23 22:20 UTC | net: phy: micrel: fix KSZ8081/KSZ8091 cable test | 1 | fl@n621.de | finished in 1h39m0s |
| 2025-07-22 12:16 UTC | net: phy: Introduce PHY ports representation | 10 | maxime.chevallier@bootlin.com | skipped |
| 2025-07-21 11:14 UTC | net: add WoL from PHY support for stm32mp135f-dk | 1 | gatien.chevallier@foss.st.com | finished in 1h31m0s |
| 2025-07-21 07:14 UTC | net: phy: micrel: Add support for lan8842 | 1 | horatiu.vultur@microchip.com | skipped |
| 2025-07-18 15:42 UTC | net: phy: Fix premature resume by a PHY driver | 1 | dev.nuvorolabs@gmail.com | finished in 3h43m0s |
| 2025-07-18 13:57 UTC | net: phy: qcom: qca807x: Enable WoL support using shared library | 1 | quic_luoj@quicinc.com | skipped |
| 2025-07-17 10:37 UTC | Documentation: networking: add detailed guide on Ethernet flow control configuration | 1 | o.rempel@pengutronix.de | finished in 3h40m0s |
| 2025-07-17 07:30 UTC | net: phy: Introduce PHY ports representation | 9 | maxime.chevallier@bootlin.com | skipped |
| 2025-07-16 10:00 UTC | net: hibmcge: Add support for PHY LEDs on YT8521 | 1 | shaojijie@huawei.com | finished in 3h36m0s |
| 2025-07-15 11:02 UTC | Add shared PHY counter support for QCA807x and QCA808x | 3 | quic_luoj@quicinc.com | finished in 3h36m0s |
| 2025-07-14 14:58 UTC | Add shared PHY counter support for QCA807x and QCA808x | 2 | quic_luoj@quicinc.com | finished in 3h45m0s |
| 2025-07-14 09:52 UTC | net: phy: smsc: use IRQ + relaxed polling to fix missed link-up | 4 | o.rempel@pengutronix.de | finished in 3h40m0s |
| 2025-07-11 09:49 UTC | net: phy: smsc: use IRQ + relaxed polling to fix missed link-up | 3 | o.rempel@pengutronix.de | finished in 3h39m0s |
| 2025-07-11 05:40 UTC | net: phy: micrel: Add ksz9131_resume() | 2 | biju.das.jz@bp.renesas.com | finished in 3h38m0s |
| 2025-07-11 03:44 UTC | r8169: add quirk for RTL8116af SerDes | 1 | hau@realtek.com | finished in 3h37m0s |
| 2025-07-10 20:14 UTC | net: phy: Don't register LEDs for genphy | 1 | sean.anderson@linux.dev | finished in 3h36m0s |
| 2025-07-10 15:31 UTC | rust: replace `kernel::c_str!` with C-Strings | 1 | tamird@gmail.com | skipped |
| 2025-07-10 13:45 UTC | net: phy: Introduce PHY ports representation | 8 | maxime.chevallier@bootlin.com | skipped |
| 2025-07-10 06:22 UTC | netdevsim: add support for PHY devices | 3 | maxime.chevallier@bootlin.com | finished in 3h38m0s |
| 2025-07-09 13:24 UTC | net: mdio: reset PHY before attempting to access registers in fwnode_mdiobus_register_phy | 1 | buday.csaba@prolan.hu | finished in 3h42m0s |
| 2025-07-09 13:07 UTC | net: phy: microchip: LAN88xx reliability fixes | 1 | o.rempel@pengutronix.de | skipped |
| 2025-07-09 10:42 UTC | net: phy: smsc: use IRQ + relaxed polling to fix missed link-up | 2 | o.rempel@pengutronix.de | finished in 3h43m0s |
| 2025-07-08 16:07 UTC | Add shared PHY counter support for QCA807x and QCA808x | 1 | quic_luoj@quicinc.com | finished in 3h36m0s |
| 2025-07-08 11:55 UTC | netdevsim: add support for PHY devices | 2 | maxime.chevallier@bootlin.com | finished in 3h34m0s |
| 2025-07-08 09:01 UTC | net: phy: bcm54811: PHY initialization | 7 | kamilh@axis.com | skipped |
| 2025-07-07 19:58 UTC | net: phy: Don't register LEDs for genphy | 1 | sean.anderson@linux.dev | finished in 3h38m0s |
| 2025-07-07 15:32 UTC | net: phy: smsc: use IRQ + relaxed polling to fix missed link-up | 1 | o.rempel@pengutronix.de | finished in 3h40m0s |
| 2025-07-07 14:29 UTC | net: phy: micrel: Add callback for restoring context | 1 | biju.das.jz@bp.renesas.com | skipped |
| 2025-07-04 17:48 UTC | net: phy: realtek: Reset after clock enable | 1 | sebastian.reichel@collabora.com | finished in 6h6m0s |
| 2025-07-04 08:35 UTC | net: phy: bcm54811: Fix the PHY initialization | 6 | kamilh@axis.com | finished in 3h35m0s |
| 2025-07-04 05:31 UTC | Fix QCA808X WoL Issue and Enable WoL Support for QCA807X | 1 | quic_luoj@quicinc.com | finished in 3h36m0s |
| 2025-07-03 12:14 UTC | Fix QCA808X WoL Issue and Enable WoL Support for QCA807X | 1 | quic_luoj@quicinc.com | finished in 3h35m0s |
| 2025-07-03 09:00 UTC | net: phy: Change flag to autoremove the consumer | 1 | quic_sarohasa@quicinc.com | skipped |
| 2025-07-03 05:55 UTC | net: phy: declare package-related struct members only if CONFIG_PHY_PACKAGE is enabled | 1 | hkallweit1@gmail.com |
finished
in 25m0s
[1 findings] |
| 2025-07-03 05:49 UTC | net: usb: lan78xx: stop including phy_fixed.h | 1 | hkallweit1@gmail.com |
finished
in 27m0s
[1 findings] |
| 2025-07-02 09:44 UTC | net: phylink: support !autoneg configuration for SFPs | 1 | rmk@armlinux.org.uk | finished in 3h56m0s |
| 2025-07-02 08:28 UTC | netdevsim: add support for PHY devices | 1 | maxime.chevallier@bootlin.com | finished in 3h35m0s |
| 2025-07-01 16:49 UTC | rust: replace kernel::str::CStr w/ core::ffi::CStr | 13 | tamird@gmail.com | skipped |
| 2025-07-01 12:21 UTC | net: phy: smsc: robustness fixes for LAN87xx/LAN9500 | 1 | o.rempel@pengutronix.de | finished in 4h24m0s |
| 2025-07-01 07:50 UTC | net: phy: bcm54811: Fix the PHY initialization | 5 | kamilh@axis.com | finished in 3h50m0s |
| 2025-06-30 15:41 UTC | net: phy: air_en8811h: Introduce resume/suspend and clk_restore_context to ensure correct CKO settings after network interface reinitialization. | 2 | lucienzx159@gmail.com | finished in 3h50m0s |
| 2025-06-30 14:33 UTC | net: phy: Introduce PHY ports representation | 7 | maxime.chevallier@bootlin.com | skipped |
| 2025-06-30 13:58 UTC | net: phy: bcm54811: Fix the PHY initialization | 4 | kamilh@axis.com | finished in 3h40m0s |
| 2025-06-30 11:30 UTC | net: phy: bcm54811: Fix the PHY initialization | 3 | kamilh@axis.com | finished in 3h48m0s |
| 2025-06-29 11:59 UTC | net: phy: air_en8811h: Introduce resume/suspend and clk_restore_context to ensure correct CKO settings after network interface reinitialization. | 1 | lucienzx159@gmail.com | finished in 3h37m0s |
| 2025-06-27 11:25 UTC | phy: micrel: add Signal Quality Indicator (SQI) support for KSZ9477 switch PHYs | 3 | o.rempel@pengutronix.de | skipped |
| 2025-06-27 11:23 UTC | net: phy: bcm54811: Fix the PHY initialization | 2 | kamilh@axis.com | finished in 3h37m0s |
| 2025-06-26 21:23 UTC | net: dsa: Add Airoha AN8855 support | 15 | ansuelsmth@gmail.com | skipped |
| 2025-06-26 11:56 UTC | net: phy: bcm54811: Fix the PHY initialization | 1 | kamilh@axis.com | skipped |
| 2025-06-26 11:16 UTC | net: phy: bcm54811: Fix the PHY initialization | 3 | kamilh@axis.com | skipped |