| 2025-12-12 08:46 UTC |
Convert Micrel bindings to YAML, add keep-preamble-before-sfd |
1 |
eichest@gmail.com |
finished
in 48m0s
|
| 2025-12-11 08:13 UTC |
net: phy: mediatek: fix nvmem cell reference leak in mt798x_phy_calibration |
1 |
linmq006@gmail.com |
finished
in 1h10m0s
|
| 2025-12-11 06:24 UTC |
net: mdio: aspeed: add dummy read to avoid read-after-write issue |
3 |
jacky_chou@aspeedtech.com |
finished
in 48m0s
|
| 2025-12-09 11:15 UTC |
net: mdio: aspeed: add dummy read to avoid read-after-write issue |
2 |
jacky_chou@aspeedtech.com |
finished
in 52m0s
|
| 2025-12-08 06:49 UTC |
net: mdio: aspeed: add dummy read to avoid read-after-write issue |
1 |
jacky_chou@aspeedtech.com |
finished
in 54m0s
|
| 2025-12-07 21:03 UTC |
net: sfp: extend Potron XGSPON quirk to cover additional EEPROM variant |
1 |
marcus.hughes@betterinternet.ltd |
finished
in 51m0s
|
| 2025-12-05 17:21 UTC |
powerpc: switch two fixed phy links to full duplex |
1 |
hkallweit1@gmail.com |
finished
in 1h0m0s
|
| 2025-12-05 01:37 UTC |
net: mdio: aspeed: add dummy read to avoid read-after-write issue |
1 |
jacky_chou@aspeedtech.com |
finished
in 58m0s
|
| 2025-12-02 18:41 UTC |
r8169: fix RTL8117 Wake-on-Lan in DASH mode |
1 |
rene@exactco.de |
finished
in 56m0s
|
| 2025-12-02 17:27 UTC |
net: phy: marvell-88q2xxx: Fix clamped value in mv88q2xxx_hwmon_write |
1 |
thorsten.blum@linux.dev |
finished
in 53m0s
|
| 2025-12-02 15:16 UTC |
r8169: fix RTL8117 Wake-on-Lan in DASH mode |
1 |
rene@exactco.de |
finished
in 51m0s
|
| 2025-12-02 09:07 UTC |
net: phy: RTL8211FVD: Restore disabling of PHY-mode EEE |
1 |
ivan.galkin@axis.com |
finished
in 1h42m0s
|
| 2025-12-01 19:17 UTC |
r8169: fix RTL8117 Wake-on-Lan in DASH mode |
1 |
rene@exactco.de |
finished
in 51m0s
|
| 2025-12-01 14:50 UTC |
net: stmmac: rk: cleanups galore |
1 |
rmk@armlinux.org.uk |
finished
in 53m0s
|
| 2025-12-01 03:23 UTC |
Add SQI and SQI+ support for OATC14 10Base-T1S PHYs and Microchip T1S driver |
4 |
parthiban.veerasooran@microchip.com |
finished
in 1h40m0s
|
| 2025-11-29 19:53 UTC |
support for hwtstamp_get in phy - part 2 |
2 |
vadim.fedorenko@linux.dev |
finished
in 51m0s
|
| 2025-11-29 08:22 UTC |
net: phy: Introduce PHY ports representation |
21 |
maxime.chevallier@bootlin.com |
finished
in 3h51m0s
|
| 2025-11-28 13:53 UTC |
net: mdio: reset PHY before attempting to access ID register |
2 |
buday.csaba@prolan.hu |
finished
in 1h48m0s
|
| 2025-11-27 21:12 UTC |
support for hwtstamp_get in phy - part 2 |
1 |
vadim.fedorenko@linux.dev |
finished
in 59m0s
|
| 2025-11-27 17:17 UTC |
net: phy: Introduce PHY ports representation |
20 |
maxime.chevallier@bootlin.com |
finished
in 3h52m0s
|
| 2025-11-27 11:44 UTC |
net: phy: aquantia: check for NVMEM deferral |
1 |
robimarko@gmail.com |
finished
in 50m0s
|
| 2025-11-26 10:49 UTC |
Add SQI and SQI+ support for OATC14 10Base-T1S PHYs and Microchip T1S driver |
3 |
parthiban.veerasooran@microchip.com |
finished
in 1h48m0s
|
| 2025-11-26 05:59 UTC |
r8169: add DASH support for RTL8127AP |
1 |
javen_xu@realsil.com.cn |
finished
in 55m0s
|
| 2025-11-25 11:15 UTC |
net: mdio: reset PHY before attempting to access ID register |
1 |
buday.csaba@prolan.hu |
finished
in 1h47m0s
|
| 2025-11-25 10:35 UTC |
net: pcs: lynx: accept in-band autoneg for 2500base-x |
2 |
vladimir.oltean@nxp.com |
finished
in 51m0s
|
| 2025-11-24 18:11 UTC |
add hwtstamp_get callback to phy drivers |
5 |
vadim.fedorenko@linux.dev |
finished
in 3h53m0s
|
| 2025-11-24 16:32 UTC |
Add DWMAC glue driver for Motorcomm YT6801 |
3 |
ziyao@disroot.org |
skipped
|
| 2025-11-24 14:50 UTC |
net: mdio: remove redundant fwnode cleanup |
1 |
buday.csaba@prolan.hu |
finished
in 1h47m0s
|
| 2025-11-24 11:27 UTC |
net: stmmac: provide flag to disable EEE |
1 |
rmk@armlinux.org.uk |
finished
in 46m0s
|
| 2025-11-24 07:37 UTC |
r8169: improve MAC EEE handling |
1 |
hkallweit1@gmail.com |
finished
in 57m0s
|
| 2025-11-24 07:19 UTC |
net: mdio: eliminate kdoc warnings in mdio_device.c and mdio_bus.c |
2 |
buday.csaba@prolan.hu |
finished
in 1h38m0s
|
| 2025-11-22 19:33 UTC |
XPCS polarity inversion via generic device tree properties |
1 |
vladimir.oltean@nxp.com |
finished
in 49m0s
|
| 2025-11-22 14:23 UTC |
r8169: fix RTL8127 hang on suspend/shutdown |
1 |
hkallweit1@gmail.com |
finished
in 48m0s
|
| 2025-11-22 13:32 UTC |
net: phy: mxl-gpy: add support for MxL86211C |
2 |
daniel@makrotopia.org |
finished
in 49m0s
|
| 2025-11-22 12:43 UTC |
net: phy: Introduce PHY ports representation |
19 |
maxime.chevallier@bootlin.com |
finished
in 3h51m0s
|
| 2025-11-22 11:34 UTC |
net: pcs: lynx: accept in-band autoneg for 2500base-x |
1 |
vladimir.oltean@nxp.com |
finished
in 57m0s
|
| 2025-11-22 11:04 UTC |
net: phy: dp83867: implement configurability for SGMII in-band auto-negotiation |
1 |
vladimir.oltean@nxp.com |
finished
in 51m0s
|
| 2025-11-21 17:58 UTC |
r8169: fix RTL8127 hang on suspend/shutdown |
1 |
hkallweit1@gmail.com |
finished
in 56m0s
|
| 2025-11-21 16:39 UTC |
net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support |
5 |
alexander.duyck@gmail.com |
finished
in 1h10m0s
|
| 2025-11-21 09:52 UTC |
net: stmmac: move stmmac_mac_finish() after stmmac_mac_config() |
1 |
rmk@armlinux.org.uk |
finished
in 54m0s
|
| 2025-11-21 09:01 UTC |
r8169: add support for RTL9151A |
3 |
javen_xu@realsil.com.cn |
finished
in 49m0s
|
| 2025-11-21 07:45 UTC |
net: mdio: eliminate kdoc warnings in mdio_device.c and mdio_bus.c |
1 |
buday.csaba@prolan.hu |
finished
in 1h39m0s
|
| 2025-11-20 20:54 UTC |
net: phy: Introduce PHY ports representation |
18 |
maxime.chevallier@bootlin.com |
finished
in 3h57m0s
|
| 2025-11-20 19:50 UTC |
r8169: add support for RTL8127ATF |
2 |
fabio.baltieri@gmail.com |
finished
in 49m0s
|
| 2025-11-20 17:45 UTC |
add hwtstamp_get callback to phy drivers |
4 |
vadim.fedorenko@linux.dev |
finished
in 3h52m0s
|
| 2025-11-20 15:02 UTC |
net: phy: mxl-gpy: fix link properties on USXGMII and internal PHYs |
1 |
daniel@makrotopia.org |
finished
in 56m0s
|
| 2025-11-20 14:17 UTC |
net: phy: mxl-gpy: fix bogus error on USXGMII and integrated PHY |
1 |
daniel@makrotopia.org |
finished
in 1h12m0s
|
| 2025-11-20 11:25 UTC |
net: stmmac: qcon-ethqos: "rgmii" accessor cleanups |
2 |
rmk@armlinux.org.uk |
finished
in 54m0s
|
| 2025-11-19 20:48 UTC |
net: Add 1600Gbps (1.6T) link mode support |
1 |
tariqt@nvidia.com |
finished
in 3h52m0s
|
| 2025-11-19 19:59 UTC |
net: phy: Introduce PHY ports representation |
17 |
maxime.chevallier@bootlin.com |
finished
in 3h52m0s
|
| 2025-11-19 14:03 UTC |
Documentation: net: add flow control guide and document ethtool API |
8 |
o.rempel@pengutronix.de |
finished
in 55m0s
|
| 2025-11-19 12:47 UTC |
net: phy: adin1100: Fix powerdown mode setting |
1 |
ada@thorsis.com |
finished
in 1h2m0s
|
| 2025-11-19 12:47 UTC |
add hwtstamp_get callback to phy drivers |
3 |
vadim.fedorenko@linux.dev |
finished
in 4h8m0s
|
| 2025-11-19 11:34 UTC |
net: stmmac: qcon-ethqos: "rgmii" accessor cleanups |
1 |
rmk@armlinux.org.uk |
finished
in 55m0s
|
| 2025-11-19 11:29 UTC |
net: stmmac: rk: use phylink's interface mode for set_clk_tx_rate() |
1 |
rmk@armlinux.org.uk |
finished
in 58m0s
|
| 2025-11-19 10:23 UTC |
net: stmmac: simplify axi_blen handling |
1 |
rmk@armlinux.org.uk |
finished
in 50m0s
|
| 2025-11-19 10:03 UTC |
net: stmmac: pass struct device to init/exit |
1 |
rmk@armlinux.org.uk |
finished
in 49m0s
|
| 2025-11-19 07:05 UTC |
net: phy: fixed_phy: fix missing initialization of fixed phy link |
1 |
hkallweit1@gmail.com |
finished
in 1h44m0s
|
| 2025-11-19 06:55 UTC |
net: phy: fixed_phy: remove not needed initialization of phy_device members |
1 |
hkallweit1@gmail.com |
finished
in 1h42m0s
|
| 2025-11-19 02:32 UTC |
r8169: add support for RTL9151A |
2 |
javen_xu@realsil.com.cn |
finished
in 1h2m0s
|
| 2025-11-18 19:05 UTC |
Probe SJA1105 DSA children using MFD and dynamic OF nodes |
1 |
vladimir.oltean@nxp.com |
finished
in 1h41m0s
|
| 2025-11-18 13:58 UTC |
net: mdio: improve reset handling of mdio devices |
3 |
buday.csaba@prolan.hu |
finished
in 1h57m0s
|
| 2025-11-18 11:18 UTC |
net: stmmac: dwc-qos-eth: simplify switch() in dwc_eth_dwmac_config_dt() |
1 |
rmk@armlinux.org.uk |
finished
in 1h36m0s
|
| 2025-11-18 11:11 UTC |
net: stmmac: document (buggy?) maximum MTU setup |
1 |
rmk@armlinux.org.uk |
finished
in 1h2m0s
|
| 2025-11-18 10:01 UTC |
net: stmmac: sanitise stmmac_is_jumbo_frm() |
1 |
rmk@armlinux.org.uk |
finished
in 1h1m0s
|
| 2025-11-18 09:41 UTC |
net: stmmac: convert priv->sph* to boolean and rename |
1 |
rmk@armlinux.org.uk |
finished
in 1h5m0s
|
| 2025-11-18 07:52 UTC |
r8169: add support for RTL9151A |
1 |
javen_xu@realsil.com.cn |
finished
in 54m0s
|
| 2025-11-18 04:59 UTC |
Add SQI and SQI+ support for OATC14 10Base-T1S PHYs and Microchip T1S driver |
2 |
parthiban.veerasooran@microchip.com |
finished
in 1h52m0s
|
| 2025-11-17 23:40 UTC |
Disable CLKOUT on RTL8211F(D)(I)-VD-CG |
3 |
vladimir.oltean@nxp.com |
finished
in 1h34m0s
|
| 2025-11-17 21:18 UTC |
net: Add 1600Gbps (1.6T) link mode support |
1 |
tariqt@nvidia.com |
finished
in 4h0m0s
|
| 2025-11-17 19:16 UTC |
r8169: add support for RTL8127ATF |
1 |
fabio.baltieri@gmail.com |
finished
in 53m0s
|
| 2025-11-17 10:29 UTC |
net: phylink: add missing supported link modes for the fixed-link |
3 |
wei.fang@nxp.com |
finished
in 1h50m0s
|
| 2025-11-17 09:28 UTC |
net: mdio: improve reset handling of mdio devices |
2 |
buday.csaba@prolan.hu |
finished
in 2h10m0s
|
| 2025-11-16 15:48 UTC |
net: phy: smsc: Skip soft reset when a hardware reset GPIO is provided |
1 |
festevam@gmail.com |
finished
in 2h12m0s
|
| 2025-11-16 02:38 UTC |
net: phylink: add missing supported link modes for the fixed-link |
2 |
wei.fang@nxp.com |
finished
in 1h38m0s
|
| 2025-11-14 15:28 UTC |
net: stmmac: clean up plat_dat allocation/initialisation |
1 |
rmk@armlinux.org.uk |
finished
in 50m0s
|
| 2025-11-14 11:39 UTC |
net: phy: fix doc for rgii_clock() |
1 |
devnull@kernel.org |
finished
in 1h0m0s
|
| 2025-11-14 08:42 UTC |
net: phy: micrel: lan8814: Enable in-band auto-negotiation |
1 |
horatiu.vultur@microchip.com |
finished
in 1h1m0s
|
| 2025-11-14 05:28 UTC |
net: phylink: add missing supported link modes for the fixed-link |
1 |
wei.fang@nxp.com |
finished
in 1h33m0s
|
| 2025-11-14 00:38 UTC |
net: stmmac: dwmac-sophgo: Add phy interface filter |
8 |
inochiama@gmail.com |
finished
in 1h39m0s
|
| 2025-11-13 21:09 UTC |
r8169: bail out from probe if fiber mode is detected on RTL8127AF |
1 |
hkallweit1@gmail.com |
finished
in 59m0s
|
| 2025-11-13 17:46 UTC |
net: stmmac: rk: use PHY_INTF_SEL_x |
1 |
rmk@armlinux.org.uk |
finished
in 1h13m0s
|
| 2025-11-13 16:33 UTC |
net: phy: Add support for fbnic PHY w/ 25G, 50G, and 100G support |
4 |
alexander.duyck@gmail.com |
finished
in 1h45m0s
|
| 2025-11-13 11:52 UTC |
Add SQI and SQI+ support for OATC14 10Base-T1S PHYs and Microchip T1S driver |
1 |
parthiban.veerasooran@microchip.com |
finished
in 1h41m0s
|
| 2025-11-13 11:31 UTC |
add hwtstamp_get callback to phy drivers |
2 |
vadim.fedorenko@linux.dev |
finished
in 3h59m0s
|
| 2025-11-13 11:29 UTC |
net: phy: disable EEE on TI PHYs |
2 |
rmk@armlinux.org.uk |
finished
in 1h35m0s
|
| 2025-11-13 08:14 UTC |
net: phy: Introduce PHY ports representation |
16 |
maxime.chevallier@bootlin.com |
finished
in 3h59m0s
|
| 2025-11-12 21:11 UTC |
net: pcs: xpcs-plat: fix MODULE_AUTHOR |
1 |
vladimir.oltean@nxp.com |
finished
in 51m0s
|
| 2025-11-12 21:06 UTC |
net: phy: fixed_phy: remove setting supported/advertised modes from fixed_phy_register |
1 |
hkallweit1@gmail.com |
finished
in 1h35m0s
|
| 2025-11-12 20:46 UTC |
net: dsa: remove definition of struct dsa_switch_driver |
1 |
hkallweit1@gmail.com |
finished
in 46m0s
|
| 2025-11-12 20:19 UTC |
Add support for PHY link active-level configuration in RZN1 MIIC driver |
1 |
prabhakar.csengg@gmail.com |
finished
in 49m0s
|
| 2025-11-12 13:57 UTC |
net: phy: mscc: Add support for PHY LED control |
4 |
prabhakar.csengg@gmail.com |
finished
in 48m0s
|
| 2025-11-12 00:02 UTC |
add hwtstamp_get callback to phy drivers |
1 |
vadim.fedorenko@linux.dev |
finished
in 3h41m0s
|
| 2025-11-11 11:38 UTC |
net: phy: disable EEE on TI PHYs |
1 |
rmk@armlinux.org.uk |
finished
in 1h40m0s
|
| 2025-11-11 11:26 UTC |
net: stmmac: always allocate mac_device_info |
1 |
rmk@armlinux.org.uk |
finished
in 1h6m0s
|
| 2025-11-11 11:26 UTC |
net: stmmac: clean up stmmac_reset() |
1 |
rmk@armlinux.org.uk |
finished
in 1h4m0s
|
| 2025-11-11 11:26 UTC |
net: stmmac: improve ndev->max_mtu setup readability |
1 |
rmk@armlinux.org.uk |
finished
in 55m0s
|
| 2025-11-11 10:52 UTC |
Add DWMAC glue driver for Motorcomm YT6801 |
2 |
ziyao@disroot.org |
skipped
|
| 2025-11-11 09:28 UTC |
r8169: add support for RTL8125K |
2 |
javen_xu@realsil.com.cn |
finished
in 1h10m0s
|
| 2025-11-11 09:10 UTC |
net: phy: mscc: Add support for PHY LED control |
3 |
prabhakar.csengg@gmail.com |
finished
in 44m0s
|