| 2025-11-29 08:22 UTC |
net: phy: Introduce PHY ports representation |
21 |
maxime.chevallier@bootlin.com |
finished
in 3h51m0s
|
| 2025-11-28 08:06 UTC |
net: dsa: b53: fix ARL accesses for BCM5325/65 and allow VID 0 |
2 |
jonas.gorski@gmail.com |
finished
in 58m0s
|
| 2025-11-27 17:17 UTC |
net: phy: Introduce PHY ports representation |
20 |
maxime.chevallier@bootlin.com |
finished
in 3h52m0s
|
| 2025-11-25 07:51 UTC |
net: dsa: b53: fix ARL accesses for BCM5325/65 and allow VID 0 |
1 |
jonas.gorski@gmail.com |
finished
in 57m0s
|
| 2025-11-22 12:43 UTC |
net: phy: Introduce PHY ports representation |
19 |
maxime.chevallier@bootlin.com |
finished
in 3h51m0s
|
| 2025-11-20 20:54 UTC |
net: phy: Introduce PHY ports representation |
18 |
maxime.chevallier@bootlin.com |
finished
in 3h57m0s
|
| 2025-11-19 19:59 UTC |
net: phy: Introduce PHY ports representation |
17 |
maxime.chevallier@bootlin.com |
finished
in 3h52m0s
|
| 2025-11-19 14:03 UTC |
Documentation: net: add flow control guide and document ethtool API |
8 |
o.rempel@pengutronix.de |
finished
in 55m0s
|
| 2025-11-16 15:48 UTC |
net: phy: smsc: Skip soft reset when a hardware reset GPIO is provided |
1 |
festevam@gmail.com |
finished
in 2h12m0s
|
| 2025-11-14 09:09 UTC |
net: dsa: microchip: lan937x: Fix RGMII delay tuning |
2 |
o.rempel@pengutronix.de |
finished
in 1h6m0s
|
| 2025-11-13 13:57 UTC |
net: dsa: hellcreek: fix missing error handling in LED registration |
1 |
pavel.zhigulin@kaspersky.com |
finished
in 1h18m0s
|
| 2025-11-13 08:14 UTC |
net: phy: Introduce PHY ports representation |
16 |
maxime.chevallier@bootlin.com |
finished
in 3h59m0s
|
| 2025-11-12 10:11 UTC |
net: dsa: microchip: lan937x: Fix RGMII delay tuning |
1 |
o.rempel@pengutronix.de |
finished
in 55m0s
|
| 2025-11-10 21:44 UTC |
net: dsa: deny unsupported 8021q uppers on bridge ports |
1 |
jonas.gorski@gmail.com |
finished
in 3h48m0s
|
| 2025-11-09 13:46 UTC |
net: dsa: tag_brcm: do not mark link local traffic as offloaded |
1 |
jonas.gorski@gmail.com |
finished
in 1h25m0s
|
| 2025-11-07 08:30 UTC |
net: dsa: b53: bcm531x5: fix cpu rgmii mode interpretation |
2 |
jonas.gorski@gmail.com |
finished
in 37m0s
|
| 2025-11-06 09:47 UTC |
net: phy: Introduce PHY ports representation |
15 |
maxime.chevallier@bootlin.com |
finished
in 4h5m0s
|
| 2025-11-03 08:13 UTC |
dt-bindings: net: ethernet-phy: clarify when compatible must specify PHY ID |
2 |
buday.csaba@prolan.hu |
finished
in 45m0s
|
| 2025-11-02 10:07 UTC |
net: dsa: b53: minor fdb related fixes |
1 |
jonas.gorski@gmail.com |
finished
in 41m0s
|
| 2025-11-01 13:28 UTC |
net: dsa: b53: fix bcm63xx rgmii user ports with speed < 1g |
1 |
jonas.gorski@gmail.com |
finished
in 57m0s
|
| 2025-10-31 08:15 UTC |
dt-bindings: net: ethernet-phy: clarify when compatible must specify PHY ID |
1 |
buday.csaba@prolan.hu |
finished
in 42m0s
|
| 2025-10-17 16:10 UTC |
net: mdio: implement optional PHY reset before MDIO access |
3 |
buday.csaba@prolan.hu |
finished
in 1h29m0s
|
| 2025-10-15 23:16 UTC |
dt-bindings: Fix inconsistent quoting |
1 |
robh@kernel.org |
finished
in 39m0s
|
| 2025-10-15 13:45 UTC |
net: mdio: common handling of phy reset properties |
2 |
buday.csaba@prolan.hu |
finished
in 1h46m0s
|
| 2025-10-14 06:02 UTC |
net: bcmgenet: remove unused platform code |
1 |
hkallweit1@gmail.com |
finished
in 46m0s
|
| 2025-10-13 14:31 UTC |
net: phy: Introduce PHY ports representation |
14 |
maxime.chevallier@bootlin.com |
finished
in 3h45m0s
|
| 2025-10-03 07:03 UTC |
net: mdio: mdio-i2c: Hold the i2c bus lock during smbus transactions |
1 |
maxime.chevallier@bootlin.com |
finished
in 43m0s
|
| 2025-09-24 12:02 UTC |
Documentation: net: add flow control guide and document ethtool API |
7 |
o.rempel@pengutronix.de |
finished
in 46m0s
|
| 2025-09-22 11:21 UTC |
Documentation: net: add flow control guide and document ethtool API |
6 |
o.rempel@pengutronix.de |
finished
in 43m0s
|
| 2025-09-21 16:03 UTC |
net: phy: Introduce PHY ports representation |
13 |
maxime.chevallier@bootlin.com |
finished
in 3h37m0s
|
| 2025-09-18 05:15 UTC |
Documentation: net: add flow control guide and document ethtool API |
5 |
o.rempel@pengutronix.de |
finished
in 48m0s
|
| 2025-09-09 15:25 UTC |
net: phy: Introduce PHY ports representation |
12 |
maxime.chevallier@bootlin.com |
finished
in 3h46m0s
|
| 2025-09-09 07:22 UTC |
Documentation and ynl: add flow control |
4 |
o.rempel@pengutronix.de |
finished
in 45m0s
|
| 2025-09-04 06:08 UTC |
net: phy: fixed_phy: remove link gpio support |
3 |
hkallweit1@gmail.com |
finished
in 1h47m0s
|
| 2025-09-02 18:37 UTC |
net: phy: fixed_phy: remove link gpio support |
2 |
hkallweit1@gmail.com |
finished
in 1h25m0s
|
| 2025-08-28 20:27 UTC |
net: phy: fixed_phy: remove link gpio support |
1 |
hkallweit1@gmail.com |
finished
in 1h20m0s
|
| 2025-08-27 21:02 UTC |
net: phy: fixed_phy: fix missing calls to gpiod_put in fixed_mdio_bus_exit |
3 |
hkallweit1@gmail.com |
finished
in 42m0s
|
| 2025-08-20 13:10 UTC |
Documentation and ynl: add flow control |
3 |
o.rempel@pengutronix.de |
finished
in 42m0s
|
| 2025-08-18 15:07 UTC |
net: pcs-rzn1-miic: Correct MODCTRL register offset |
1 |
prabhakar.csengg@gmail.com |
finished
in 1h55m0s
|
| 2025-08-15 20:18 UTC |
net: dsa: b53: fix reserved register access in b53_fdb_dump() |
1 |
jonas.gorski@gmail.com |
finished
in 1h47m0s
|
| 2025-08-14 13:58 UTC |
net: phy: Introduce PHY ports representation |
11 |
maxime.chevallier@bootlin.com |
finished
in 3h48m0s
|
| 2025-08-14 07:53 UTC |
Documentation: networking: add detailed guide on Ethernet flow control configuration |
2 |
o.rempel@pengutronix.de |
finished
in 1h31m0s
|
| 2025-08-13 11:21 UTC |
dt-bindings: net: realtek,rtl82xx: document wakeup-source property |
1 |
rmk@armlinux.org.uk |
finished
in 1h46m0s
|
| 2025-07-30 20:25 UTC |
net: mdio: mdio-bcm-unimac: Correct rate fallback logic |
2 |
florian.fainelli@broadcom.com |
finished
in 1h32m0s
|
| 2025-07-24 03:52 UTC |
net: dsa: b53: mmap: Add bcm63xx EPHY power control |
2 |
kylehendrydev@gmail.com |
finished
in 1h27m0s
|
| 2025-07-22 12:16 UTC |
net: phy: Introduce PHY ports representation |
10 |
maxime.chevallier@bootlin.com |
skipped
|
| 2025-07-17 10:37 UTC |
Documentation: networking: add detailed guide on Ethernet flow control configuration |
1 |
o.rempel@pengutronix.de |
finished
in 3h40m0s
|
| 2025-07-17 07:30 UTC |
net: phy: Introduce PHY ports representation |
9 |
maxime.chevallier@bootlin.com |
skipped
|
| 2025-07-16 15:35 UTC |
net: bridge: Do not offload IGMP/MLD messages |
3 |
joseph.huang@garmin.com |
finished
in 3h35m0s
|
| 2025-07-16 00:29 UTC |
net: dsa: b53: mmap: Add bcm63xx EPHY power control |
1 |
kylehendrydev@gmail.com |
finished
in 3h37m0s
|
| 2025-07-14 15:01 UTC |
net: bridge: Do not offload IGMP/MLD messages |
2 |
joseph.huang@garmin.com |
finished
in 3h36m0s
|
| 2025-07-10 20:14 UTC |
net: phy: Don't register LEDs for genphy |
1 |
sean.anderson@linux.dev |
finished
in 3h36m0s
|
| 2025-07-10 13:45 UTC |
net: phy: Introduce PHY ports representation |
8 |
maxime.chevallier@bootlin.com |
skipped
|
| 2025-07-10 06:22 UTC |
netdevsim: add support for PHY devices |
3 |
maxime.chevallier@bootlin.com |
finished
in 3h38m0s
|
| 2025-07-09 13:07 UTC |
net: phy: microchip: LAN88xx reliability fixes |
1 |
o.rempel@pengutronix.de |
skipped
|
| 2025-07-08 11:55 UTC |
netdevsim: add support for PHY devices |
2 |
maxime.chevallier@bootlin.com |
finished
in 3h34m0s
|
| 2025-07-07 19:58 UTC |
net: phy: Don't register LEDs for genphy |
1 |
sean.anderson@linux.dev |
finished
in 3h38m0s
|
| 2025-07-04 08:35 UTC |
net: phy: bcm54811: Fix the PHY initialization |
6 |
kamilh@axis.com |
finished
in 3h35m0s
|
| 2025-07-03 09:00 UTC |
net: phy: Change flag to autoremove the consumer |
1 |
quic_sarohasa@quicinc.com |
skipped
|
| 2025-07-02 08:28 UTC |
netdevsim: add support for PHY devices |
1 |
maxime.chevallier@bootlin.com |
finished
in 3h35m0s
|
| 2025-07-01 19:36 UTC |
net: bridge: Do not offload IGMP/MLD messages |
1 |
joseph.huang@garmin.com |
finished
in 3h42m0s
|
| 2025-07-01 07:50 UTC |
net: phy: bcm54811: Fix the PHY initialization |
5 |
kamilh@axis.com |
finished
in 3h50m0s
|
| 2025-06-30 14:33 UTC |
net: phy: Introduce PHY ports representation |
7 |
maxime.chevallier@bootlin.com |
skipped
|
| 2025-06-30 13:58 UTC |
net: phy: bcm54811: Fix the PHY initialization |
4 |
kamilh@axis.com |
finished
in 3h40m0s
|
| 2025-06-30 11:30 UTC |
net: phy: bcm54811: Fix the PHY initialization |
3 |
kamilh@axis.com |
finished
in 3h48m0s
|
| 2025-06-27 11:23 UTC |
net: phy: bcm54811: Fix the PHY initialization |
2 |
kamilh@axis.com |
finished
in 3h37m0s
|
| 2025-06-26 11:56 UTC |
net: phy: bcm54811: Fix the PHY initialization |
1 |
kamilh@axis.com |
skipped
|
| 2025-06-26 11:16 UTC |
net: phy: bcm54811: Fix the PHY initialization |
3 |
kamilh@axis.com |
skipped
|