| Published | Title | Version | Author | Status |
|---|---|---|---|---|
| 2026-04-12 00:01 UTC | net: dsa: mxl862xx: add statistics support | 2 | daniel@makrotopia.org | finished in 1h3m0s |
| 2026-04-11 10:51 UTC | net: phy: realtek: use LEDCR page number define on RTL8211F | 1 | olek2@wp.pl | finished in 2h8m0s |
| 2026-04-11 00:13 UTC | net: dsa: mxl862xx: add statistics support | 1 | daniel@makrotopia.org | finished in 1h26m0s |
| 2026-04-10 02:57 UTC | net: ethernet: mtk_eth_soc: initialize PPE per-tag-layer MTU registers | 2 | daniel@makrotopia.org | finished in 1h11m0s |
| 2026-04-09 13:33 UTC | net: pcs: pcs-mtk-lynxi: fix bpi-r3 serdes configuration | 1 | linux@fw-web.de | finished in 1h21m0s |
| 2026-04-09 13:07 UTC | improve hw flow offload byte accounting | 1 | daniel@makrotopia.org |
finished
in 1h1m0s
[1 findings] |
| 2026-04-08 23:33 UTC | net: ethernet: mtk_eth_soc: initialize PPE per-tag-layer MTU registers | 1 | daniel@makrotopia.org | skipped |
| 2026-04-07 17:30 UTC | net: dsa: mxl862xx: VLAN support and minor improvements | 1 | daniel@makrotopia.org | finished in 1h38m0s |
| 2026-04-06 20:12 UTC | net: phy: realtek: get rid of magic numbers in rtl8201_config_intr() | 1 | olek2@wp.pl | finished in 1h52m0s |
| 2026-04-05 21:29 UTC | selftests: net: bridge_vlan_mcast: wait for h1 before querier check | 1 | daniel@makrotopia.org | finished in 1h11m0s |
| 2026-04-03 12:37 UTC | net: phy_port: SFP modules representation and phy_port listing | 9 | maxime.chevallier@bootlin.com | finished in 4h16m0s |
| 2026-04-03 09:06 UTC | net: phy: add support for disabling autonomous EEE | 1 | nb@tipi-net.de | finished in 4h41m0s |
| 2026-04-01 13:34 UTC | net: dsa: mxl862xx: add support for bridge offloading | 9 | daniel@makrotopia.org | finished in 1h34m0s |
| 2026-04-01 10:00 UTC | net: phy: realtek: Add support for PHY LEDs on RTL8221B | 1 | amadeus@jmu.edu.cn | finished in 2h11m0s |
| 2026-03-30 22:52 UTC | net: dsa: mxl862xx: cancel pending work on probe error | 1 | daniel@makrotopia.org | finished in 1h9m0s |
| 2026-03-27 19:32 UTC | net: phy: realtek: support MDI swapping for RTL8226-CG | 2 | jan@3e8.eu | finished in 2h20m0s |
| 2026-03-27 01:00 UTC | net: dsa: mxl862xx: add support for bridge offloading | 8 | daniel@makrotopia.org | finished in 1h11m0s |
| 2026-03-26 15:35 UTC | net: phy: air_en8811h: add AN8811HB MCU assert/deassert support | 2 | lucienzx159@gmail.com | finished in 1h16m0s |
| 2026-03-25 17:54 UTC | net: dsa: mxl862xx: add support for bridge offloading | 7 | daniel@makrotopia.org | finished in 1h24m0s |
| 2026-03-25 08:19 UTC | net: phy_port: SFP modules representation and phy_port listing | 8 | maxime.chevallier@bootlin.com | finished in 4h27m0s |
| 2026-03-22 19:31 UTC | net: phy: realtek: support MDI swapping for RTL8226-CG | 1 | jan@3e8.eu | finished in 2h9m0s |
| 2026-03-22 13:27 UTC | net: dsa: mxl862xx: MDIO bus integrity and optimization | 2 | daniel@makrotopia.org | finished in 1h7m0s |
| 2026-03-22 00:18 UTC | net: dsa: mxl862xx: add support for bridge offloading | 6 | daniel@makrotopia.org | finished in 1h59m0s |
| 2026-03-21 05:19 UTC | net: dsa: mxl862xx: MDIO bus integrity and optimization | 1 | daniel@makrotopia.org | finished in 1h26m0s |
| 2026-03-21 04:26 UTC | selftests: forwarding: local_termination: fix PTP UDP cksums | 1 | daniel@makrotopia.org | finished in 1h34m0s |
| 2026-03-18 03:07 UTC | net: dsa: mxl862xx: don't read out-of-bounds | 1 | daniel@makrotopia.org | finished in 1h8m0s |
| 2026-03-15 16:20 UTC | net: dsa: mxl862xx: add support for bridge offloading | 5 | daniel@makrotopia.org | finished in 1h20m0s |
| 2026-03-15 15:19 UTC | net: phy: mxl-gpy: add PHY-level statistics via ethtool | 2 | daniel@makrotopia.org | finished in 1h1m0s |
| 2026-03-15 13:41 UTC | net: phy: airoha: add AN8811HB MCU assert/deassert support | 1 | lucienzx159@gmail.com | finished in 1h0m0s |
| 2026-03-13 01:19 UTC | net: phy: mxl-gpy: add PHY-level statistics via ethtool | 1 | daniel@makrotopia.org | skipped |
| 2026-03-12 03:33 UTC | net: dsa: mxl862xx: add support for bridge offloading | 4 | daniel@makrotopia.org | finished in 1h5m0s |
| 2026-03-11 00:49 UTC | net: dsa: mxl862xx: add support for bridge offloading | 3 | daniel@makrotopia.org | finished in 1h12m0s |
| 2026-03-10 18:10 UTC | selftests: net: local_termination: test link-local protocols | 2 | daniel@makrotopia.org | finished in 1h13m0s |
| 2026-03-10 00:41 UTC | net: dsa: mxl862xx: don't set user_mii_bus | 1 | daniel@makrotopia.org | finished in 1h14m0s |
| 2026-03-10 00:40 UTC | net: dsa: mxl862xx: add support for bridge offloading | 2 | daniel@makrotopia.org | finished in 1h22m0s |
| 2026-03-09 16:03 UTC | selftests: net: local_termination: test link-local protocols | 1 | daniel@makrotopia.org | finished in 1h4m0s |
| 2026-03-09 15:27 UTC | net: phy_port: SFP modules representation and phy_port listing | 7 | maxime.chevallier@bootlin.com | finished in 4h14m0s |
| 2026-03-07 03:30 UTC | net: dsa: mxl862xx: add support for bridge offloading | 1 | daniel@makrotopia.org | finished in 1h0m0s |
| 2026-03-06 03:16 UTC | net: dsa: skip user_mii_bus fallback if phy-handle is set | 1 | daniel@makrotopia.org | finished in 4h14m0s |
| 2026-03-04 14:54 UTC | net: phy_port: SFP modules representation and phy_port listing | 6 | maxime.chevallier@bootlin.com | finished in 4h12m0s |
| 2026-03-04 12:03 UTC | net: phy: realtek: Add support for PHY LEDs on RTL8211F-VD | 2 | devnull@kernel.org | finished in 1h7m0s |
| 2026-03-03 21:53 UTC | MAINTAINERS: annual cleanup of inactive maintainers | 1 | kuba@kernel.org | finished in 1h23m0s |
| 2026-03-03 03:17 UTC | net: dsa: mxl862xx: rename MDIO op arguments | 1 | daniel@makrotopia.org | finished in 1h13m0s |
| 2026-03-03 03:16 UTC | dt-bindings: net: dsa: maxlinear,mxl862xx: remove port label | 1 | daniel@makrotopia.org | finished in 1h32m0s |
| 2026-02-28 23:22 UTC | net: phy: Disable MDIO broadcast address on YT8821 | 2 | linuxtardis@gmail.com | finished in 1h50m0s |
| 2026-02-16 10:55 UTC | net: dsa: MxL862xx: don't force-enable MAXLINEAR_GPHY | 1 | arnd@kernel.org | finished in 1h9m0s |
| 2026-02-07 03:07 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 14 | daniel@makrotopia.org | finished in 48m0s |
| 2026-02-05 09:23 UTC | net: phy_port: SFP modules representation and phy_port listing | 5 | maxime.chevallier@bootlin.com | finished in 4h11m0s |
| 2026-02-04 13:32 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 13 | daniel@makrotopia.org | finished in 56m0s |
| 2026-02-03 17:28 UTC | net: phy_port: SFP modules representation and phy_port listing | 4 | maxime.chevallier@bootlin.com | finished in 4h3m0s |
| 2026-02-01 15:12 UTC | net: phy_port: SFP modules representation and phy_port listing | 3 | maxime.chevallier@bootlin.com | finished in 3h49m0s |
| 2026-02-01 03:41 UTC | net: dsa: mxl-gsw1xx: setup polarities and validate chip | 3 | daniel@makrotopia.org | finished in 48m0s |
| 2026-02-01 02:24 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 12 | daniel@makrotopia.org | finished in 50m0s |
| 2026-01-31 00:10 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 11 | daniel@makrotopia.org | finished in 55m0s |
| 2026-01-30 16:40 UTC | net: lantiq_etop: remove driver | 2 | hkallweit1@gmail.com | finished in 58m0s |
| 2026-01-30 00:37 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 10 | daniel@makrotopia.org | finished in 1h10m0s |
| 2026-01-29 17:18 UTC | net: lantiq_etop: remove driver | 1 | hkallweit1@gmail.com | finished in 57m0s |
| 2026-01-28 20:45 UTC | net: phy_port: SFP modules representation and phy_port listing | 2 | maxime.chevallier@bootlin.com | finished in 4h8m0s |
| 2026-01-27 21:37 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 9 | daniel@makrotopia.org | finished in 50m0s |
| 2026-01-27 13:41 UTC | net: phy_port: SFP modules representation and phy_port listing | 1 | maxime.chevallier@bootlin.com | finished in 4h18m0s |
| 2026-01-27 13:18 UTC | net: dsa: mxl-gsw1xx: setup polarities and validate chip | 1 | daniel@makrotopia.org | skipped |
| 2026-01-27 12:55 UTC | Airoha AN8811HB 2.5 Gbps phy support | 4 | bjorn@mork.no | finished in 1h4m0s |
| 2026-01-26 06:57 UTC | Airoha AN8811HB 2.5 Gbps phy support | 3 | bjorn@mork.no | finished in 1h0m0s |
| 2026-01-23 07:58 UTC | Airoha AN8811HB 2.5 Gbps phy support | 2 | bjorn@mork.no | finished in 1h27m0s |
| 2026-01-22 16:38 UTC | net: dsa: lantiq: add support for Intel GSW150 | 6 | daniel@makrotopia.org | finished in 56m0s |
| 2026-01-22 07:15 UTC | Airoha AN8811HB 2.5 Gbps phy support | 1 | bjorn@mork.no | skipped |
| 2026-01-22 04:00 UTC | net: mdio: setup RealTek MDIO polling registers | 2 | daniel@makrotopia.org | finished in 1h56m0s |
| 2026-01-22 03:41 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 8 | daniel@makrotopia.org | finished in 1h16m0s |
| 2026-01-21 21:12 UTC | net: phy: add (*register_phy)() hook to struct mii_bus | 1 | daniel@makrotopia.org | finished in 1h56m0s |
| 2026-01-21 02:23 UTC | net: pcs: pcs-mtk-lynxi: report in-band capability for 2500Base-X | 1 | daniel@makrotopia.org | finished in 50m0s |
| 2026-01-19 09:12 UTC | PHY polarity inversion via generic device tree properties | 4 | vladimir.oltean@nxp.com | finished in 1h1m0s |
| 2026-01-19 00:41 UTC | net: phy: intel-xway: fix OF node refcount leakage | 2 | daniel@makrotopia.org | finished in 52m0s |
| 2026-01-18 03:57 UTC | net: phy: intel-xway: fix OF node refcount leakage | 1 | daniel@makrotopia.org | finished in 54m0s |
| 2026-01-18 03:45 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 7 | daniel@makrotopia.org | finished in 56m0s |
| 2026-01-18 03:21 UTC | net: dsa: lantiq: add support for Intel GSW150 | 5 | daniel@makrotopia.org | finished in 49m0s |
| 2026-01-17 02:23 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 6 | daniel@makrotopia.org | finished in 50m0s |
| 2026-01-17 01:16 UTC | net: dsa: lantiq: add support for Intel GSW150 | 4 | daniel@makrotopia.org | finished in 49m0s |
| 2026-01-16 00:07 UTC | net: dsa: lantiq: add support for Intel GSW150 | 3 | daniel@makrotopia.org | finished in 1h20m0s |
| 2026-01-15 23:40 UTC | net: phy: intel-xway: workaround stale LEDs before link-up | 1 | daniel@makrotopia.org | finished in 1h15m0s |
| 2026-01-15 00:56 UTC | net: dsa: lantiq: add support for Intel GSW150 | 2 | daniel@makrotopia.org | finished in 59m0s |
| 2026-01-14 10:45 UTC | dsa: mxl-gsw1xx: Support R(G)MII slew rate configuration | 5 | alexander.sverdlin@siemens.com | finished in 55m0s |
| 2026-01-13 20:55 UTC | net: phy: realtek: fix in-band capabilities for 2.5G PHYs | 1 | jan@3e8.eu | finished in 1h48m0s |
| 2026-01-13 11:00 UTC | dt-bindings: net: dsa: mt7530: Allow interrupts-extended dependency | 1 | angelogioacchino.delregno@collabora.com | finished in 1h14m0s |
| 2026-01-13 03:44 UTC | net: phy: realtek: simplify and reunify C22/C45 drivers | 2 | daniel@makrotopia.org | finished in 34m0s |
| 2026-01-13 03:24 UTC | net: dsa: lantiq: add support for Intel GSW150 | 1 | daniel@makrotopia.org | finished in 38m0s |
| 2026-01-13 03:11 UTC | net: ethernet: mtk_eth_soc: support using non-MediaTek DSA switches | 1 | daniel@makrotopia.org | finished in 1h2m0s |
| 2026-01-12 13:51 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 5 | daniel@makrotopia.org | finished in 1h10m0s |
| 2026-01-11 09:39 UTC | PHY polarity inversion via generic device tree properties | 3 | vladimir.oltean@nxp.com | finished in 49m0s |
| 2026-01-10 15:14 UTC | r8169: add support for RTL8127ATF (10G Fiber SFP) | 2 | hkallweit1@gmail.com | finished in 1h35m0s |
| 2026-01-09 03:03 UTC | net: phy: realtek: simplify and reunify C22/C45 drivers | 1 | daniel@makrotopia.org | finished in 1h41m0s |
| 2026-01-08 20:27 UTC | r8169: add support for RTL8127ATF (10G Fiber SFP) | 1 | hkallweit1@gmail.com | finished in 1h48m0s |
| 2026-01-08 08:00 UTC | net: phy: Introduce PHY ports representation | 22 | maxime.chevallier@bootlin.com | finished in 4h1m0s |
| 2026-01-07 15:39 UTC | net: phy: mxl-gpy: implement SGMII in-band configuration | 1 | daniel@makrotopia.org | finished in 45m0s |
| 2026-01-07 09:00 UTC | dsa: mxl-gsw1xx: Support R(G)MII slew rate configuration | 4 | alexander.sverdlin@siemens.com | finished in 53m0s |
| 2026-01-06 17:14 UTC | net: dsa: initial support for MaxLinear MxL862xx switches | 4 | daniel@makrotopia.org | finished in 1h10m0s |
| 2026-01-05 17:53 UTC | dsa: mxl-gsw1xx: Support R(G)MII slew rate configuration | 3 | alexander.sverdlin@siemens.com | finished in 1h4m0s |
| 2026-01-05 16:37 UTC | net: phy: realtek: various improvements for 2.5GE PHYs | 2 | daniel@makrotopia.org | finished in 1h45m0s |
| 2026-01-04 13:11 UTC | net: phy: realtek: various improvements for 2.5GE PHYs | 1 | daniel@makrotopia.org |
finished
in 54m0s
[1 findings] |
| 2026-01-03 21:03 UTC | PHY polarity inversion via generic device tree properties | 2 | vladimir.oltean@nxp.com | finished in 52m0s |
| 2026-01-02 11:30 UTC | net: phy: mediatek: enable interrupts on AN7581 | 1 | olek2@wp.pl | finished in 57m0s |